
Deployment Guide
================

-----------------------
Hardware Considerations
-----------------------

Swift is designed to run on commodity hardware. At Rackspace, our storage
servers are currently running fairly generic 4U servers with 24 2T SATA
drives and 8 cores of processing power. RAID on the storage drives is not
required and not recommended. Swift's disk usage pattern is the worst
case possible for RAID, and performance degrades very quickly using RAID 5
or 6.

------------------
Deployment Options
------------------

The Swift services run completely autonomously, which provides for a lot of
flexibility when architecting the hardware deployment for Swift. The 4 main
services are:

#. Proxy Services
#. Object Services
#. Container Services
#. Account Services

The Proxy Services are more CPU and network I/O intensive. If you are using
10g networking to the proxy, or are terminating SSL traffic at the proxy,
greater CPU power will be required.

The Object, Container, and Account Services (Storage Services) are more disk
and network I/O intensive.

The easiest deployment is to install all services on each server. There is
nothing wrong with doing this, as it scales each service out horizontally.

At Rackspace, we put the Proxy Services on their own servers and all of the
Storage Services on the same server. This allows us to send 10g networking to
the proxy and 1g to the storage servers, and keep load balancing to the
proxies more manageable.  Storage Services scale out horizontally as storage
servers are added, and we can scale overall API throughput by adding more
Proxies.

If you need more throughput to either Account or Container Services, they may
each be deployed to their own servers. For example you might use faster (but
more expensive) SAS or even SSD drives to get faster disk I/O to the databases.

A high-availability (HA) deployment of Swift requires that multiple proxy
servers are deployed and requests are load-balanced between them. Each proxy
server instance is stateless and able to respond to requests for the entire
cluster.

Load balancing and network design is left as an exercise to the reader,
but this is a very important part of the cluster, so time should be spent
designing the network for a Swift cluster.


---------------------
Web Front End Options
---------------------

Swift comes with an integral web front end. However, it can also be deployed
as a request processor of an Apache2 using mod_wsgi as described in
:doc:`Apache Deployment Guide <apache_deployment_guide>`.

.. _ring-preparing:

------------------
Preparing the Ring
------------------

The first step is to determine the number of partitions that will be in the
ring. We recommend that there be a minimum of 100 partitions per drive to
insure even distribution across the drives. A good starting point might be
to figure out the maximum number of drives the cluster will contain, and then
multiply by 100, and then round up to the nearest power of two.

For example, imagine we are building a cluster that will have no more than
5,000 drives. That would mean that we would have a total number of 500,000
partitions, which is pretty close to 2^19, rounded up.

It is also a good idea to keep the number of partitions small (relatively).
The more partitions there are, the more work that has to be done by the
replicators and other backend jobs and the more memory the rings consume in
process. The goal is to find a good balance between small rings and maximum
cluster size.

The next step is to determine the number of replicas to store of the data.
Currently it is recommended to use 3 (as this is the only value that has
been tested). The higher the number, the more storage that is used but the
less likely you are to lose data.

It is also important to determine how many zones the cluster should have. It is
recommended to start with a minimum of 5 zones. You can start with fewer, but
our testing has shown that having at least five zones is optimal when failures
occur. We also recommend trying to configure the zones at as high a level as
possible to create as much isolation as possible. Some example things to take
into consideration can include physical location, power availability, and
network connectivity. For example, in a small cluster you might decide to
split the zones up by cabinet, with each cabinet having its own power and
network connectivity. The zone concept is very abstract, so feel free to use
it in whatever way best isolates your data from failure. Each zone exists
in a region.

A region is also an abstract concept that may be used to distinguish between
geographically separated areas as well as can be used within same datacenter.
Regions and zones are referenced by a positive integer.

You can now start building the ring with::

    swift-ring-builder <builder_file> create <part_power> <replicas> <min_part_hours>

This will start the ring build process creating the <builder_file> with
2^<part_power> partitions. <min_part_hours> is the time in hours before a
specific partition can be moved in succession (24 is a good value for this).

Devices can be added to the ring with::

    swift-ring-builder <builder_file> add r<region>z<zone>-<ip>:<port>/<device_name>_<meta> <weight>

This will add a device to the ring where <builder_file> is the name of the
builder file that was created previously, <region> is the number of the region
the zone is in, <zone> is the number of the zone this device is in, <ip> is
the ip address of the server the device is in, <port> is the port number that
the server is running on, <device_name> is the name of the device on the server
(for example: sdb1), <meta> is a string of metadata for the device (optional),
and <weight> is a float weight that determines how many partitions are put on
the device relative to the rest of the devices in the cluster (a good starting
point is 100.0 x TB on the drive).Add each device that will be initially in the
cluster.

Once all of the devices are added to the ring, run::

    swift-ring-builder <builder_file> rebalance

This will distribute the partitions across the drives in the ring. It is
important whenever making changes to the ring to make all the changes
required before running rebalance. This will ensure that the ring stays as
balanced as possible, and as few partitions are moved as possible.

The above process should be done to make a ring for each storage service
(Account, Container and Object). The builder files will be needed in future
changes to the ring, so it is very important that these be kept and backed up.
The resulting .tar.gz ring file should be pushed to all of the servers in the
cluster. For more information about building rings, running
swift-ring-builder with no options will display help text with available
commands and options. More information on how the ring works internally
can be found in the :doc:`Ring Overview <overview_ring>`.

.. _server-per-port-configuration:

-------------------------------
Running object-servers Per Disk
-------------------------------

The lack of true asynchronous file I/O on Linux leaves the object-server
workers vulnerable to misbehaving disks.  Because any object-server worker can
service a request for any disk, and a slow I/O request blocks the eventlet hub,
a single slow disk can impair an entire storage node.  This also prevents
object servers from fully utilizing all their disks during heavy load.

Another way to get full I/O isolation is to give each disk on a storage node a
different port in the storage policy rings.  Then set the
:ref:`servers_per_port <object-server-default-options>`
option in the object-server config.  NOTE: while the purpose of this config
setting is to run one or more object-server worker processes per *disk*, the
implementation just runs object-servers per unique port of local devices in the
rings.  The deployer must combine this option with appropriately-configured
rings to benefit from this feature.

Here's an example (abbreviated) old-style ring (2 node cluster with 2 disks
each)::

 Devices:    id  region  zone      ip address  port  replication ip  replication port      name
              0       1     1       1.1.0.1    6200       1.1.0.1                6200      d1
              1       1     1       1.1.0.1    6200       1.1.0.1                6200      d2
              2       1     2       1.1.0.2    6200       1.1.0.2                6200      d3
              3       1     2       1.1.0.2    6200       1.1.0.2                6200      d4

And here's the same ring set up for ``servers_per_port``::

 Devices:    id  region  zone      ip address  port  replication ip  replication port      name
              0       1     1       1.1.0.1    6200       1.1.0.1                6200      d1
              1       1     1       1.1.0.1    6201       1.1.0.1                6201      d2
              2       1     2       1.1.0.2    6200       1.1.0.2                6200      d3
              3       1     2       1.1.0.2    6201       1.1.0.2                6201      d4

When migrating from normal to ``servers_per_port``, perform these steps in order:

#. Upgrade Swift code to a version capable of doing ``servers_per_port``.

#. Enable ``servers_per_port`` with a value greater than zero.

#. Restart ``swift-object-server`` processes with a SIGHUP.  At this point, you
   will have the ``servers_per_port`` number of ``swift-object-server`` processes
   serving all requests for all disks on each node.  This preserves
   availability, but you should perform the next step as quickly as possible.

#. Push out new rings that actually have different ports per disk on each
   server.  One of the ports in the new ring should be the same as the port
   used in the old ring ("6200" in the example above).  This will cover
   existing proxy-server processes who haven't loaded the new ring yet.  They
   can still talk to any storage node regardless of whether or not that
   storage node has loaded the ring and started object-server processes on the
   new ports.

If you do not run a separate object-server for replication, then this setting
must be available to the object-replicator and object-reconstructor (i.e.
appear in the [DEFAULT] config section).

.. _general-service-configuration:

-----------------------------
General Service Configuration
-----------------------------

Most Swift services fall into two categories.  Swift's wsgi servers and
background daemons.

For more information specific to the configuration of Swift's wsgi servers
with paste deploy see :ref:`general-server-configuration`.

Configuration for servers and daemons can be expressed together in the same
file for each type of server, or separately.  If a required section for the
service trying to start is missing there will be an error.  The sections not
used by the service are ignored.

Consider the example of an object storage node.  By convention, configuration
for the object-server, object-updater, object-replicator, object-auditor, and
object-reconstructor exist in a single file ``/etc/swift/object-server.conf``::

    [DEFAULT]
    reclaim_age = 604800

    [pipeline:main]
    pipeline = object-server

    [app:object-server]
    use = egg:swift#object

    [object-replicator]

    [object-updater]

    [object-auditor]

Swift services expect a configuration path as the first argument::

    $ swift-object-auditor
    Usage: swift-object-auditor CONFIG [options]

    Error: missing config path argument

If you omit the object-auditor section this file could not be used as the
configuration path when starting the ``swift-object-auditor`` daemon::

    $ swift-object-auditor /etc/swift/object-server.conf
    Unable to find object-auditor config section in /etc/swift/object-server.conf

If the configuration path is a directory instead of a file all of the files in
the directory with the file extension ".conf" will be combined to generate the
configuration object which is delivered to the Swift service.  This is
referred to generally as "directory based configuration".

Directory based configuration leverages ConfigParser's native multi-file
support.  Files ending in ".conf" in the given directory are parsed in
lexicographical order.  Filenames starting with '.' are ignored.  A mixture of
file and directory configuration paths is not supported - if the configuration
path is a file only that file will be parsed.

The Swift service management tool ``swift-init`` has adopted the convention of
looking for ``/etc/swift/{type}-server.conf.d/`` if the file
``/etc/swift/{type}-server.conf`` file does not exist.

When using directory based configuration, if the same option under the same
section appears more than once in different files, the last value parsed is
said to override previous occurrences.  You can ensure proper override
precedence by prefixing the files in the configuration directory with
numerical values.::

    /etc/swift/
        default.base
        object-server.conf.d/
            000_default.conf -> ../default.base
            001_default-override.conf
            010_server.conf
            020_replicator.conf
            030_updater.conf
            040_auditor.conf

You can inspect the resulting combined configuration object using the
``swift-config`` command line tool

.. _general-server-configuration:

----------------------------
General Server Configuration
----------------------------

Swift uses paste.deploy (http://pythonpaste.org/deploy/) to manage server
configurations.

Default configuration options are set in the ``[DEFAULT]`` section, and any
options specified there can be overridden in any of the other sections BUT
ONLY BY USING THE SYNTAX ``set option_name = value``. This is the unfortunate
way paste.deploy works and I'll try to explain it in full.

First, here's an example paste.deploy configuration file::

    [DEFAULT]
    name1 = globalvalue
    name2 = globalvalue
    name3 = globalvalue
    set name4 = globalvalue

    [pipeline:main]
    pipeline = myapp

    [app:myapp]
    use = egg:mypkg#myapp
    name2 = localvalue
    set name3 = localvalue
    set name5 = localvalue
    name6 = localvalue

The resulting configuration that myapp receives is::

    global {'__file__': '/etc/mypkg/wsgi.conf', 'here': '/etc/mypkg',
            'name1': 'globalvalue',
            'name2': 'globalvalue',
            'name3': 'localvalue',
            'name4': 'globalvalue',
            'name5': 'localvalue',
            'set name4': 'globalvalue'}
    local {'name6': 'localvalue'}

So, ``name1`` got the global value which is fine since it's only in the ``DEFAULT``
section anyway.

``name2`` got the global value from ``DEFAULT`` even though it appears to be
overridden in the ``app:myapp`` subsection. This is just the unfortunate way
paste.deploy works (at least at the time of this writing.)

``name3`` got the local value from the ``app:myapp`` subsection because it is using
the special paste.deploy syntax of ``set option_name = value``. So, if you want
a default value for most app/filters but want to override it in one
subsection, this is how you do it.

``name4`` got the global value from ``DEFAULT`` since it's only in that section
anyway. But, since we used the ``set`` syntax in the ``DEFAULT`` section even
though we shouldn't, notice we also got a ``set name4`` variable. Weird, but
probably not harmful.

``name5`` got the local value from the ``app:myapp`` subsection since it's only
there anyway, but notice that it is in the global configuration and not the
local configuration. This is because we used the ``set`` syntax to set the
value. Again, weird, but not harmful since Swift just treats the two sets of
configuration values as one set anyway.

``name6`` got the local value from ``app:myapp`` subsection since it's only there,
and since we didn't use the ``set`` syntax, it's only in the local
configuration and not the global one. Though, as indicated above, there is no
special distinction with Swift.

That's quite an explanation for something that should be so much simpler, but
it might be important to know how paste.deploy interprets configuration files.
The main rule to remember when working with Swift configuration files is:

.. note::

    Use the ``set option_name = value`` syntax in subsections if the option is
    also set in the ``[DEFAULT]`` section. Don't get in the habit of always
    using the ``set`` syntax or you'll probably mess up your non-paste.deploy
    configuration files.

--------------------
Common configuration
--------------------

An example of common configuration file can be found at etc/swift.conf-sample

The following configuration options are available:

==========================  ==========  =============================================
Option                      Default     Description
--------------------------  ----------  ---------------------------------------------
max_header_size             8192        max_header_size is the max number of bytes in
                                        the utf8 encoding of each header. Using 8192
                                        as default because eventlet use 8192 as max
                                        size of header line. This value may need to
                                        be increased when using identity v3 API
                                        tokens including more than 7 catalog entries.
                                        See also include_service_catalog in
                                        proxy-server.conf-sample (documented in
                                        overview_auth.rst).
extra_header_count          0           By default the maximum number of allowed
                                        headers depends on the number of max
                                        allowed metadata settings plus a default
                                        value of 32 for regular http  headers.
                                        If for some reason this is not enough (custom
                                        middleware for example) it can be increased
                                        with the extra_header_count constraint.
auto_create_account_prefix  .           Prefix used when automatically creating
                                        accounts.
==========================  ==========  =============================================

---------------------------
Object Server Configuration
---------------------------

An Example Object Server configuration can be found at
etc/object-server.conf-sample in the source code repository.

The following configuration sections are available:

* :ref:`[DEFAULT] <object-server-default-options>`
* `[object-server]`_
* `[object-replicator]`_
* `[object-reconstructor]`_
* `[object-updater]`_
* `[object-auditor]`_
* `[object-expirer]`_

.. _object-server-default-options:

*********
[DEFAULT]
*********

================================ ==========  ============================================
Option                           Default     Description
-------------------------------- ----------  --------------------------------------------
swift_dir                        /etc/swift  Swift configuration directory
devices                          /srv/node   Parent directory of where devices are
                                             mounted
mount_check                      true        Whether or not check if the devices are
                                             mounted to prevent accidentally writing
                                             to the root device
bind_ip                          0.0.0.0     IP Address for server to bind to
bind_port                        6200        Port for server to bind to
keep_idle                        600         Value to set for socket TCP_KEEPIDLE
bind_timeout                     30          Seconds to attempt bind before giving up
backlog                          4096        Maximum number of allowed pending
                                             connections
workers                          auto        Override the number of pre-forked workers
                                             that will accept connections.  If set it
                                             should be an integer, zero means no fork.
                                             If unset, it will try to default to the
                                             number of effective cpu cores and fallback
                                             to one. Increasing the number of workers
                                             helps slow filesystem operations in one
                                             request from negatively impacting other
                                             requests, but only the
                                             :ref:`servers_per_port
                                             <server-per-port-configuration>` option
                                             provides complete I/O isolation with no
                                             measurable overhead.
servers_per_port                 0           If each disk in each storage policy ring
                                             has unique port numbers for its "ip"
                                             value, you can use this setting to have
                                             each object-server worker only service
                                             requests for the single disk matching the
                                             port in the ring. The value of this
                                             setting determines how many worker
                                             processes run for each port (disk) in the
                                             ring. If you have 24 disks per server, and
                                             this setting is 4, then each storage node
                                             will have 1 + (24 * 4) = 97 total
                                             object-server processes running. This
                                             gives complete I/O isolation, drastically
                                             reducing the impact of slow disks on
                                             storage node performance. The
                                             object-replicator and object-reconstructor
                                             need to see this setting too, so it must
                                             be in the [DEFAULT] section.
                                             See :ref:`server-per-port-configuration`.
max_clients                      1024        Maximum number of clients one worker can
                                             process simultaneously (it will actually
                                             accept(2) N + 1). Setting this to one (1)
                                             will only handle one request at a time,
                                             without accepting another request
                                             concurrently.
disable_fallocate                false       Disable "fast fail" fallocate checks if
                                             the underlying filesystem does not support
                                             it.
log_name                         swift       Label used when logging
log_facility                     LOG_LOCAL0  Syslog log facility
log_level                        INFO        Logging level
log_address                      /dev/log    Logging directory
log_max_line_length              0           Caps the length of log lines to the
                                             value given; no limit if set to 0, the
                                             default.
log_custom_handlers              None        Comma-separated list of functions to call
                                             to setup custom log handlers.
log_udp_host                                 Override log_address
log_udp_port                     514         UDP log port
log_statsd_host                  None        Enables StatsD logging; IPv4/IPv6
                                             address or a hostname.  If a
                                             hostname resolves to an IPv4 and IPv6
                                             address, the IPv4 address will be
                                             used.
log_statsd_port                  8125
log_statsd_default_sample_rate   1.0
log_statsd_sample_rate_factor    1.0
log_statsd_metric_prefix
eventlet_debug                   false       If true, turn on debug logging for
                                             eventlet
fallocate_reserve                1%          You can set fallocate_reserve to the
                                             number of bytes or percentage of disk
                                             space you'd like fallocate to reserve,
                                             whether there is space for the given
                                             file size or not. Percentage will be used
                                             if the value ends with a '%'. This is
                                             useful for systems that behave badly when
                                             they completely run out of space; you can
                                             make the services pretend they're out of
                                             space early.
conn_timeout                     0.5         Time to wait while attempting to connect
                                             to another backend node.
node_timeout                     3           Time to wait while sending each chunk of
                                             data to another backend node.
client_timeout                   60          Time to wait while receiving each chunk of
                                             data from a client or another backend node
network_chunk_size               65536       Size of chunks to read/write over the
                                             network
disk_chunk_size                  65536       Size of chunks to read/write to disk
container_update_timeout         1           Time to wait while sending a container
                                             update on object update.
reclaim_age                      604800      Time elapsed in seconds before the tombstone
                                             file representing a deleted object can be
                                             reclaimed.  This is the maximum window for
                                             your consistency engine.  If a node that was
                                             disconnected from the cluster because of a
                                             fault is reintroduced into the cluster after
                                             this window without having its data purged
                                             it will result in dark data.  This setting
                                             should be consistent across all object
                                             services.
nice_priority                    None        Scheduling priority of server processes.
                                             Niceness values range from -20 (most
                                             favorable to the process) to 19 (least
                                             favorable to the process). The default
                                             does not modify priority.
ionice_class                     None        I/O scheduling class of server processes.
                                             I/O niceness class values are IOPRIO_CLASS_RT
                                             (realtime), IOPRIO_CLASS_BE (best-effort),
                                             and IOPRIO_CLASS_IDLE (idle).
                                             The default does not modify class and
                                             priority. Linux supports io scheduling
                                             priorities and classes since 2.6.13 with
                                             the CFQ io scheduler.
                                             Work only with ionice_priority.
ionice_priority                  None        I/O scheduling priority of server
                                             processes. I/O niceness priority is
                                             a number which goes from 0 to 7.
                                             The higher the value, the lower the I/O
                                             priority of the process. Work only with
                                             ionice_class.
                                             Ignored if IOPRIO_CLASS_IDLE is set.
================================ ==========  ============================================

.. _object-server-options:

***************
[object-server]
***************

================================== ====================== ===============================================
Option                             Default                Description
---------------------------------- ---------------------- -----------------------------------------------
use                                                       paste.deploy entry point for the
                                                          object server.  For most cases,
                                                          this should be
                                                          ``egg:swift#object``.
set log_name                       object-server          Label used when logging
set log_facility                   LOG_LOCAL0             Syslog log facility
set log_level                      INFO                   Logging level
set log_requests                   True                   Whether or not to log each
                                                          request
set log_address                    /dev/log               Logging directory
user                               swift                  User to run as
max_upload_time                    86400                  Maximum time allowed to upload an
                                                          object
slow                               0                      If > 0, Minimum time in seconds for a PUT or
                                                          DELETE request to complete.  This is only
                                                          useful to simulate slow devices during testing
                                                          and development.
mb_per_sync                        512                    On PUT requests, sync file every
                                                          n MB
keep_cache_size                    5242880                Largest object size to keep in
                                                          buffer cache
keep_cache_private                 false                  Allow non-public objects to stay
                                                          in kernel's buffer cache
allowed_headers                    Content-Disposition,   Comma separated list of headers
                                   Content-Encoding,      that can be set in metadata on an object.
                                   X-Delete-At,           This list is in addition to
                                   X-Object-Manifest,     X-Object-Meta-* headers and cannot include
                                   X-Static-Large-Object  Content-Type, etag, Content-Length, or deleted
                                   Cache-Control,
                                   Content-Language,
                                   Expires,
                                   X-Robots-Tag
replication_server                                        Configure parameter for creating
                                                          specific server. To handle all verbs,
                                                          including replication verbs, do not
                                                          specify "replication_server"
                                                          (this is the default). To only
                                                          handle replication, set to a True
                                                          value (e.g. "True" or "1").
                                                          To handle only non-replication
                                                          verbs, set to "False". Unless you
                                                          have a separate replication network, you
                                                          should not specify any value for
                                                          "replication_server".
replication_concurrency            4                      Set to restrict the number of
                                                          concurrent incoming SSYNC
                                                          requests; set to 0 for unlimited
replication_concurrency_per_device 1                      Set to restrict the number of
                                                          concurrent incoming SSYNC
                                                          requests per device; set to 0 for
                                                          unlimited requests per devices.
                                                          This can help control I/O to each
                                                          device. This does not override
                                                          replication_concurrency described
                                                          above, so you may need to adjust
                                                          both parameters depending on your
                                                          hardware or network capacity.
replication_lock_timeout           15                     Number of seconds to wait for an
                                                          existing replication device lock
                                                          before giving up.
replication_failure_threshold      100                    The number of subrequest failures
                                                          before the
                                                          replication_failure_ratio is
                                                          checked
replication_failure_ratio          1.0                    If the value of failures /
                                                          successes of SSYNC
                                                          subrequests exceeds this ratio,
                                                          the overall SSYNC request
                                                          will be aborted
splice                             no                     Use splice() for zero-copy object
                                                          GETs. This requires Linux kernel
                                                          version 3.0 or greater. If you set
                                                          "splice = yes" but the kernel
                                                          does not support it, error messages
                                                          will appear in the object server
                                                          logs at startup, but your object
                                                          servers should continue to function.
nice_priority                      None                   Scheduling priority of server processes.
                                                          Niceness values range from -20 (most
                                                          favorable to the process) to 19 (least
                                                          favorable to the process). The default
                                                          does not modify priority.
ionice_class                       None                   I/O scheduling class of server processes.
                                                          I/O niceness class values are IOPRIO_CLASS_RT
                                                          (realtime), IOPRIO_CLASS_BE (best-effort),
                                                          and IOPRIO_CLASS_IDLE (idle).
                                                          The default does not modify class and
                                                          priority. Linux supports io scheduling
                                                          priorities and classes since 2.6.13 with
                                                          the CFQ io scheduler.
                                                          Work only with ionice_priority.
ionice_priority                    None                   I/O scheduling priority of server
                                                          processes. I/O niceness priority is
                                                          a number which goes from 0 to 7.
                                                          The higher the value, the lower the I/O
                                                          priority of the process. Work only with
                                                          ionice_class.
                                                          Ignored if IOPRIO_CLASS_IDLE is set.
eventlet_tpool_num_threads         auto                   The number of threads in eventlet's thread pool.
                                                          Most IO will occur in the object server's main
                                                          thread, but certain "heavy" IO operations will
                                                          occur in separate IO threads, managed by
                                                          eventlet.
                                                          The default value is auto, whose actual value
                                                          is dependent on the servers_per_port value.
                                                          If servers_per_port is zero then it uses
                                                          eventlet's default (currently 20 threads).
                                                          If the servers_per_port is nonzero then it'll
                                                          only use 1 thread per process.
                                                          This value can be overridden with an integer
                                                          value.
================================== ====================== ===============================================

*******************
[object-replicator]
*******************

===========================  ========================  ================================
Option                       Default                   Description
---------------------------  ------------------------  --------------------------------
log_name                     object-replicator         Label used when logging
log_facility                 LOG_LOCAL0                Syslog log facility
log_level                    INFO                      Logging level
log_address                  /dev/log                  Logging directory
daemonize                    yes                       Whether or not to run replication
                                                       as a daemon
interval                     30                        Time in seconds to wait between
                                                       replication passes
concurrency                  1                         Number of replication jobs to
                                                       run per worker process
replicator_workers           0                         Number of worker processes to use.
                                                       No matter how big this number is,
                                                       at most one worker per disk will
                                                       be used. The default value of 0
                                                       means no forking; all work is done
                                                       in the main process.
sync_method                  rsync                     The sync method to use; default
                                                       is rsync but you can use ssync to
                                                       try the EXPERIMENTAL
                                                       all-swift-code-no-rsync-callouts
                                                       method. Once ssync is verified as
                                                       or better than, rsync, we plan to
                                                       deprecate rsync so we can move on
                                                       with more features for
                                                       replication.
rsync_timeout                900                       Max duration of a partition rsync
rsync_bwlimit                0                         Bandwidth limit for rsync in kB/s.
                                                       0 means unlimited.
rsync_io_timeout             30                        Timeout value sent to rsync
                                                       --timeout and --contimeout
                                                       options
rsync_compress               no                        Allow rsync to compress data
                                                       which is transmitted to destination
                                                       node during sync. However, this
                                                       is applicable only when destination
                                                       node is in a different region
                                                       than the local one.
                                                       NOTE: Objects that are already
                                                       compressed (for example: .tar.gz,
                                                       .mp3) might slow down the syncing
                                                       process.
stats_interval               300                       Interval in seconds between
                                                       logging replication statistics
handoffs_first               false                     If set to True, partitions that
                                                       are not supposed to be on the
                                                       node will be replicated first.
                                                       The default setting should not be
                                                       changed, except for extreme
                                                       situations.
handoff_delete               auto                      By default handoff partitions
                                                       will be removed when it has
                                                       successfully replicated to all
                                                       the canonical nodes. If set to an
                                                       integer n, it will remove the
                                                       partition if it is successfully
                                                       replicated to n nodes.  The
                                                       default setting should not be
                                                       changed, except for extreme
                                                       situations.
node_timeout                 DEFAULT or 10             Request timeout to external
                                                       services. This uses what's set
                                                       here, or what's set in the
                                                       DEFAULT section, or 10 (though
                                                       other sections use 3 as the final
                                                       default).
http_timeout                 60                        Max duration of an http request.
                                                       This is for REPLICATE finalization
                                                       calls and so should be longer
                                                       than node_timeout.
lockup_timeout               1800                      Attempts to kill all workers if
                                                       nothing replicates for
                                                       lockup_timeout seconds
rsync_module                 {replication_ip}::object  Format of the rsync module where
                                                       the replicator will send data.
                                                       The configuration value can
                                                       include some variables that will
                                                       be extracted from the ring.
                                                       Variables must follow the format
                                                       {NAME} where NAME is one of: ip,
                                                       port, replication_ip,
                                                       replication_port, region, zone,
                                                       device, meta. See
                                                       etc/rsyncd.conf-sample for some
                                                       examples.
rsync_error_log_line_length  0                         Limits how long rsync error log
                                                       lines are
ring_check_interval          15                        Interval for checking new ring
                                                       file
recon_cache_path             /var/cache/swift          Path to recon cache
nice_priority                None                      Scheduling priority of server
                                                       processes. Niceness values
                                                       range from -20 (most favorable
                                                       to the process) to 19 (least
                                                       favorable to the process).
                                                       The default does not modify
                                                       priority.
ionice_class                 None                      I/O scheduling class of server
                                                       processes. I/O niceness class
                                                       values are IOPRIO_CLASS_RT (realtime),
                                                       IOPRIO_CLASS_BE (best-effort),
                                                       and IOPRIO_CLASS_IDLE (idle).
                                                       The default does not modify
                                                       class and priority.
                                                       Linux supports io scheduling
                                                       priorities and classes since
                                                       2.6.13 with the CFQ io scheduler.
                                                       Work only with ionice_priority.
ionice_priority              None                      I/O scheduling priority of server
                                                       processes. I/O niceness priority
                                                       is a number which goes from
                                                       0 to 7. The higher the value,
                                                       the lower the I/O priority of
                                                       the process.
                                                       Work only with ionice_class.
                                                       Ignored if IOPRIO_CLASS_IDLE
                                                       is set.
===========================  ========================  ================================

**********************
[object-reconstructor]
**********************

===========================  ========================  ================================
Option                       Default                   Description
---------------------------  ------------------------  --------------------------------
log_name                     object-reconstructor      Label used when logging
log_facility                 LOG_LOCAL0                Syslog log facility
log_level                    INFO                      Logging level
log_address                  /dev/log                  Logging directory
daemonize                    yes                       Whether or not to run
                                                       reconstruction as a daemon
interval                     30                        Time in seconds to wait between
                                                       reconstruction passes
reconstructor_workers        0                         Maximum number of worker processes
                                                       to spawn.  Each worker will handle
                                                       a subset of devices.  Devices will
                                                       be assigned evenly among the workers
                                                       so that workers cycle at similar
                                                       intervals (which can lead to fewer
                                                       workers than requested).  You can not
                                                       have more workers than devices.  If
                                                       you have no devices only a single
                                                       worker is spawned.
concurrency                  1                         Number of reconstruction threads to
                                                       spawn per reconstructor process.
stats_interval               300                       Interval in seconds between
                                                       logging reconstruction statistics
handoffs_only                false                     The handoffs_only mode option is for
                                                       special case emergency situations
                                                       during rebalance such as disk full in
                                                       the cluster.  This option SHOULD NOT
                                                       BE CHANGED, except for extreme
                                                       situations.  When handoffs_only mode
                                                       is enabled the reconstructor will
                                                       *only* revert fragments from handoff
                                                       nodes to primary nodes and will not
                                                       sync primary nodes with neighboring
                                                       primary nodes.  This will force the
                                                       reconstructor to sync and delete
                                                       handoffs' fragments more quickly and
                                                       minimize the time of the rebalance by
                                                       limiting the number of rebuilds.  The
                                                       handoffs_only option is only for
                                                       temporary use and should be disabled
                                                       as soon as the emergency situation
                                                       has been resolved.
node_timeout                 DEFAULT or 10             Request timeout to external
                                                       services. The value used is the value
                                                       set in this section, or the value set
                                                       in the DEFAULT section, or 10.
http_timeout                 60                        Max duration of an http request.
                                                       This is for REPLICATE finalization
                                                       calls and so should be longer
                                                       than node_timeout.
lockup_timeout               1800                      Attempts to kill all threads if
                                                       no fragment has been reconstructed
                                                       for lockup_timeout seconds.
ring_check_interval          15                        Interval for checking new ring
                                                       file
recon_cache_path             /var/cache/swift          Path to recon cache
nice_priority                None                      Scheduling priority of server
                                                       processes. Niceness values
                                                       range from -20 (most favorable
                                                       to the process) to 19 (least
                                                       favorable to the process).
                                                       The default does not modify
                                                       priority.
ionice_class                 None                      I/O scheduling class of server
                                                       processes. I/O niceness class
                                                       values are IOPRIO_CLASS_RT (realtime),
                                                       IOPRIO_CLASS_BE (best-effort),
                                                       and IOPRIO_CLASS_IDLE (idle).
                                                       The default does not modify
                                                       class and priority.
                                                       Linux supports io scheduling
                                                       priorities and classes since
                                                       2.6.13 with the CFQ io scheduler.
                                                       Work only with ionice_priority.
ionice_priority              None                      I/O scheduling priority of server
                                                       processes. I/O niceness priority
                                                       is a number which goes from
                                                       0 to 7. The higher the value,
                                                       the lower the I/O priority of
                                                       the process.
                                                       Work only with ionice_class.
                                                       Ignored if IOPRIO_CLASS_IDLE
                                                       is set.
===========================  ========================  ================================

****************
[object-updater]
****************

=================== =================== ==========================================
Option              Default             Description
------------------- ------------------- ------------------------------------------
log_name            object-updater      Label used when logging
log_facility        LOG_LOCAL0          Syslog log facility
log_level           INFO                Logging level
log_address         /dev/log            Logging directory
interval            300                 Minimum time for a pass to take
updater_workers     1                   Number of worker processes
concurrency         8                   Number of updates to run concurrently in
                                        each worker process
node_timeout        DEFAULT or 10       Request timeout to external services. This
                                        uses what's set here, or what's set in the
                                        DEFAULT section, or 10 (though other
                                        sections use 3 as the final default).
objects_per_second  50                  Maximum objects updated per second.
                                        Should be tuned according to individual
                                        system specs. 0 is unlimited.
slowdown            0.01                Time in seconds to wait between objects.
                                        Deprecated in favor of objects_per_second.
report_interval     300                 Interval in seconds between logging
                                        statistics about the current update pass.
recon_cache_path    /var/cache/swift    Path to recon cache
nice_priority       None                Scheduling priority of server processes.
                                        Niceness values range from -20 (most
                                        favorable to the process) to 19 (least
                                        favorable to the process). The default
                                        does not modify priority.
ionice_class        None                I/O scheduling class of server processes.
                                        I/O niceness class values are IOPRIO_CLASS_RT
                                        (realtime), IOPRIO_CLASS_BE (best-effort),
                                        and IOPRIO_CLASS_IDLE (idle).
                                        The default does not modify class and
                                        priority. Linux supports io scheduling
                                        priorities and classes since 2.6.13 with
                                        the CFQ io scheduler.
                                        Work only with ionice_priority.
ionice_priority     None                I/O scheduling priority of server
                                        processes. I/O niceness priority is
                                        a number which goes from 0 to 7.
                                        The higher the value, the lower the I/O
                                        priority of the process. Work only with
                                        ionice_class.
                                        Ignored if IOPRIO_CLASS_IDLE is set.
=================== =================== ==========================================

****************
[object-auditor]
****************

=========================== =================== ==========================================
Option                      Default             Description
--------------------------- ------------------- ------------------------------------------
log_name                    object-auditor      Label used when logging
log_facility                LOG_LOCAL0          Syslog log facility
log_level                   INFO                Logging level
log_address                 /dev/log            Logging directory
log_time                    3600                Frequency of status logs in seconds.
interval                    30                  Time in seconds to wait between
                                                auditor passes
disk_chunk_size             65536               Size of chunks read during auditing
files_per_second            20                  Maximum files audited per second per
                                                auditor process. Should be tuned according
                                                to individual system specs. 0 is unlimited.
bytes_per_second            10000000            Maximum bytes audited per second per
                                                auditor process. Should be tuned according
                                                to individual system specs. 0 is unlimited.
concurrency                 1                   The number of parallel processes to use
                                                for checksum auditing.
zero_byte_files_per_second  50
object_size_stats
recon_cache_path            /var/cache/swift    Path to recon cache
rsync_tempfile_timeout      auto                Time elapsed in seconds before rsync
                                                tempfiles will be unlinked. Config value
                                                of "auto" try to use object-replicator's
                                                rsync_timeout + 900 or fallback to 86400
                                                (1 day).
nice_priority               None                Scheduling priority of server processes.
                                                Niceness values range from -20 (most
                                                favorable to the process) to 19 (least
                                                favorable to the process). The default
                                                does not modify priority.
ionice_class                None                I/O scheduling class of server processes.
                                                I/O niceness class values are IOPRIO_CLASS_RT
                                                (realtime), IOPRIO_CLASS_BE (best-effort),
                                                and IOPRIO_CLASS_IDLE (idle).
                                                The default does not modify class and
                                                priority. Linux supports io scheduling
                                                priorities and classes since 2.6.13 with
                                                the CFQ io scheduler.
                                                Work only with ionice_priority.
ionice_priority             None                I/O scheduling priority of server
                                                processes. I/O niceness priority is
                                                a number which goes from 0 to 7.
                                                The higher the value, the lower the I/O
                                                priority of the process. Work only with
                                                ionice_class.
                                                Ignored if IOPRIO_CLASS_IDLE is set.
=========================== =================== ==========================================

****************
[object-expirer]
****************

============================= =============================== ==========================================
Option                        Default                         Description
----------------------------- ------------------------------- ------------------------------------------
log_name                      object-expirer                  Label used when logging
log_facility                  LOG_LOCAL0                      Syslog log facility
log_level                     INFO                            Logging level
log_address                   /dev/log                        Logging directory
interval                      300                             Time in seconds to wait between
                                                              expirer passes
report_interval               300                             Frequency of status logs in seconds.
concurrency                   1                               Level of concurrency to use to do the work,
                                                              this value must be set to at least 1
expiring_objects_account_name expiring_objects                name for legacy expirer task queue
dequeue_from_legacy           False                           This service will look for jobs on the legacy expirer task queue.
processes                     0                               How many parts to divide the legacy work into,
                                                              one part per process that will be doing the work.
                                                              When set 0 means that a single legacy
                                                              process will be doing all the work.
                                                              This can only be used in conjunction with
                                                              ``dequeue_from_legacy``.
process                       0                               Which of the parts a particular legacy process will
                                                              work on. It is "zero based", if you want to use 3
                                                              processes, you should run processes with process
                                                              set to 0, 1, and 2.
                                                              This can only be used in conjunction with
                                                              ``dequeue_from_legacy``.
reclaim_age                   604800                          How long an un-processable expired object
                                                              marker will be retried before it is abandoned.
                                                              It is not coupled with the tombstone reclaim age
                                                              in the consistency engine.
request_tries                 3                               The number of times the expirer's internal client
                                                              will attempt any given request in the event
                                                              of failure
recon_cache_path              /var/cache/swift                Path to recon cache
nice_priority                 None                            Scheduling priority of server processes.
                                                              Niceness values range from -20 (most
                                                              favorable to the process) to 19 (least
                                                              favorable to the process). The default
                                                              does not modify priority.
ionice_class                  None                            I/O scheduling class of server processes.
                                                              I/O niceness class values are IOPRIO_CLASS_RT
                                                              (realtime), IOPRIO_CLASS_BE (best-effort),
                                                              and IOPRIO_CLASS_IDLE (idle).
                                                              The default does not modify class and
                                                              priority. Linux supports io scheduling
                                                              priorities and classes since 2.6.13 with
                                                              the CFQ io scheduler.
                                                              Work only with ionice_priority.
ionice_priority               None                            I/O scheduling priority of server
                                                              processes. I/O niceness priority is
                                                              a number which goes from 0 to 7.
                                                              The higher the value, the lower the I/O
                                                              priority of the process. Work only with
                                                              ionice_class.
                                                              Ignored if IOPRIO_CLASS_IDLE is set.
============================= =============================== ==========================================

------------------------------
Container Server Configuration
------------------------------

An example Container Server configuration can be found at
etc/container-server.conf-sample in the source code repository.

The following configuration sections are available:

* :ref:`[DEFAULT] <container_server_default_options>`
* `[container-server]`_
* `[container-replicator]`_
* `[container-updater]`_
* `[container-auditor]`_

.. _container_server_default_options:

*********
[DEFAULT]
*********

===============================  ==========  ============================================
Option                           Default     Description
-------------------------------  ----------  --------------------------------------------
swift_dir                        /etc/swift  Swift configuration directory
devices                          /srv/node   Parent directory of where devices are mounted
mount_check                      true        Whether or not check if the devices are
                                             mounted to prevent accidentally writing
                                             to the root device
bind_ip                          0.0.0.0     IP Address for server to bind to
bind_port                        6201        Port for server to bind to
keep_idle                        600         Value to set for socket TCP_KEEPIDLE
bind_timeout                     30          Seconds to attempt bind before giving up
backlog                          4096        Maximum number of allowed pending
                                             connections
workers                          auto        Override the number of pre-forked workers
                                             that will accept connections.  If set it
                                             should be an integer, zero means no fork.  If
                                             unset, it will try to default to the number
                                             of effective cpu cores and fallback to one.
                                             Increasing the number of workers may reduce
                                             the possibility of slow file system
                                             operations in one request from negatively
                                             impacting other requests.  See
                                             :ref:`general-service-tuning`.
max_clients                      1024        Maximum number of clients one worker can
                                             process simultaneously (it will actually
                                             accept(2) N + 1). Setting this to one (1)
                                             will only handle one request at a time,
                                             without accepting another request
                                             concurrently.
user                             swift       User to run as
disable_fallocate                false       Disable "fast fail" fallocate checks if the
                                             underlying filesystem does not support it.
log_name                         swift       Label used when logging
log_facility                     LOG_LOCAL0  Syslog log facility
log_level                        INFO        Logging level
log_address                      /dev/log    Logging directory
log_max_line_length              0           Caps the length of log lines to the
                                             value given; no limit if set to 0, the
                                             default.
log_custom_handlers              None        Comma-separated list of functions to call
                                             to setup custom log handlers.
log_udp_host                                 Override log_address
log_udp_port                     514         UDP log port
log_statsd_host                  None        Enables StatsD logging; IPv4/IPv6
                                             address or a hostname.  If a
                                             hostname resolves to an IPv4 and IPv6
                                             address, the IPv4 address will be
                                             used.
log_statsd_port                  8125
log_statsd_default_sample_rate   1.0
log_statsd_sample_rate_factor    1.0
log_statsd_metric_prefix
eventlet_debug                   false       If true, turn on debug logging for eventlet
fallocate_reserve                1%          You can set fallocate_reserve to the
                                             number of bytes or percentage of disk
                                             space you'd like fallocate to reserve,
                                             whether there is space for the given
                                             file size or not. Percentage will be used
                                             if the value ends with a '%'. This is
                                             useful for systems that behave badly when
                                             they completely run out of space; you can
                                             make the services pretend they're out of
                                             space early.
db_preallocation                 off         If you don't mind the extra disk space usage
                                             in overhead, you can turn this on to preallocate
                                             disk space with SQLite databases to decrease
                                             fragmentation.
nice_priority                    None        Scheduling priority of server processes.
                                             Niceness values range from -20 (most
                                             favorable to the process) to 19 (least
                                             favorable to the process). The default
                                             does not modify priority.
ionice_class                     None        I/O scheduling class of server processes.
                                             I/O niceness class values are IOPRIO_CLASS_RT
                                             (realtime), IOPRIO_CLASS_BE (best-effort),
                                             and IOPRIO_CLASS_IDLE (idle).
                                             The default does not modify class and
                                             priority. Linux supports io scheduling
                                             priorities and classes since 2.6.13
                                             with the CFQ io scheduler.
                                             Work only with ionice_priority.
ionice_priority                  None        I/O scheduling priority of server processes.
                                             I/O niceness priority is a number which
                                             goes from 0 to 7. The higher the value,
                                             the lower the I/O priority of the process.
                                             Work only with ionice_class.
                                             Ignored if IOPRIO_CLASS_IDLE is set.
===============================  ==========  ============================================

******************
[container-server]
******************

==============================  ================  ========================================
Option                          Default           Description
------------------------------  ----------------  ----------------------------------------
use                                               paste.deploy entry point for the
                                                  container server.  For most cases, this
                                                  should be ``egg:swift#container``.
set log_name                    container-server  Label used when logging
set log_facility                LOG_LOCAL0        Syslog log facility
set log_level                   INFO              Logging level
set log_requests                True              Whether or not to log each
                                                  request
set log_address                 /dev/log          Logging directory
node_timeout                    3                 Request timeout to external services
conn_timeout                    0.5               Connection timeout to external services
allow_versions                  false             Enable/Disable object versioning feature
replication_server                                Configure parameter for creating
                                                  specific server. To handle all verbs,
                                                  including replication verbs, do not
                                                  specify "replication_server"
                                                  (this is the default). To only
                                                  handle replication, set to a True
                                                  value (e.g. "True" or "1").
                                                  To handle only non-replication
                                                  verbs, set to "False". Unless you
                                                  have a separate replication network, you
                                                  should not specify any value for
                                                  "replication_server".
nice_priority                   None              Scheduling priority of server processes.
                                                  Niceness values range from -20 (most
                                                  favorable to the process) to 19 (least
                                                  favorable to the process). The default
                                                  does not modify priority.
ionice_class                    None              I/O scheduling class of server processes.
                                                  I/O niceness class values are
                                                  IOPRIO_CLASS_RT (realtime),
                                                  IOPRIO_CLASS_BE (best-effort),
                                                  and IOPRIO_CLASS_IDLE (idle).
                                                  The default does not modify class and
                                                  priority. Linux supports io scheduling
                                                  priorities and classes since 2.6.13 with
                                                  the CFQ io scheduler.
                                                  Work only with ionice_priority.
ionice_priority                 None              I/O scheduling priority of server
                                                  processes. I/O niceness priority is
                                                  a number which goes from 0 to 7.
                                                  The higher the value, the lower the I/O
                                                  priority of the process. Work only with
                                                  ionice_class.
                                                  Ignored if IOPRIO_CLASS_IDLE is set.
==============================  ================  ========================================

**********************
[container-replicator]
**********************

==================== ===========================  =============================
Option               Default                      Description
-------------------- ---------------------------  -----------------------------
log_name             container-replicator         Label used when logging
log_facility         LOG_LOCAL0                   Syslog log facility
log_level            INFO                         Logging level
log_address          /dev/log                     Logging directory
per_diff             1000                         Maximum number of database
                                                  rows that will be sync'd in a
                                                  single HTTP replication
                                                  request. Databases with less
                                                  than or equal to this number
                                                  of differing rows will always
                                                  be sync'd using an HTTP
                                                  replication request rather
                                                  than using rsync.
max_diffs            100                          Maximum number of HTTP
                                                  replication requests attempted
                                                  on each replication pass for
                                                  any one container. This caps
                                                  how long the replicator will
                                                  spend trying to sync a given
                                                  database per pass so the other
                                                  databases don't get starved.
concurrency          8                            Number of replication workers
                                                  to spawn
interval             30                           Time in seconds to wait
                                                  between replication passes
databases_per_second 50                           Maximum databases to process
                                                  per second.  Should be tuned
                                                  according to individual
                                                  system specs.  0 is unlimited.
node_timeout         10                           Request timeout to external
                                                  services
conn_timeout         0.5                          Connection timeout to external
                                                  services
reclaim_age          604800                       Time elapsed in seconds before
                                                  a container can be reclaimed
rsync_module         {replication_ip}::container  Format of the rsync module
                                                  where the replicator will send
                                                  data. The configuration value
                                                  can include some variables
                                                  that will be extracted from
                                                  the ring. Variables must
                                                  follow the format {NAME} where
                                                  NAME is one of: ip, port,
                                                  replication_ip,
                                                  replication_port, region,
                                                  zone, device, meta. See
                                                  etc/rsyncd.conf-sample for
                                                  some examples.
rsync_compress       no                           Allow rsync to compress data
                                                  which is transmitted to
                                                  destination node during sync.
                                                  However, this is applicable
                                                  only when destination node is
                                                  in a different region than the
                                                  local one. NOTE: Objects that
                                                  are already compressed (for
                                                  example: .tar.gz, mp3) might
                                                  slow down the syncing process.
recon_cache_path     /var/cache/swift             Path to recon cache
nice_priority        None                         Scheduling priority of server
                                                  processes. Niceness values
                                                  range from -20 (most favorable
                                                  to the process) to 19 (least
                                                  favorable to the process).
                                                  The default does not modify
                                                  priority.
ionice_class         None                         I/O scheduling class of server
                                                  processes. I/O niceness class
                                                  values are
                                                  IOPRIO_CLASS_RT (realtime),
                                                  IOPRIO_CLASS_BE (best-effort),
                                                  and IOPRIO_CLASS_IDLE (idle).
                                                  The default does not modify
                                                  class and priority. Linux
                                                  supports io scheduling
                                                  priorities and classes since
                                                  2.6.13 with the CFQ io
                                                  scheduler.
                                                  Work only with ionice_priority.
ionice_priority      None                         I/O scheduling priority of
                                                  server processes. I/O niceness
                                                  priority is a number which goes
                                                  from 0 to 7.
                                                  The higher the value, the lower
                                                  the I/O priority of the process.
                                                  Work only with ionice_class.
                                                  Ignored if IOPRIO_CLASS_IDLE
                                                  is set.
==================== ===========================  =============================

*******************
[container-updater]
*******************

========================  =================  ==================================
Option                    Default            Description
------------------------  -----------------  ----------------------------------
log_name                  container-updater  Label used when logging
log_facility              LOG_LOCAL0         Syslog log facility
log_level                 INFO               Logging level
log_address               /dev/log           Logging directory
interval                  300                Minimum time for a pass to take
concurrency               4                  Number of updater workers to spawn
node_timeout              3                  Request timeout to external
                                             services
conn_timeout              0.5                Connection timeout to external
                                             services
containers_per_second     50                 Maximum containers updated per second.
                                             Should be tuned according to individual
                                             system specs. 0 is unlimited.

slowdown                  0.01               Time in seconds to wait between
                                             containers. Deprecated in favor of
                                             containers_per_second.
account_suppression_time  60                 Seconds to suppress updating an
                                             account that has generated an
                                             error (timeout, not yet found,
                                             etc.)
recon_cache_path          /var/cache/swift   Path to recon cache
nice_priority             None               Scheduling priority of server
                                             processes. Niceness values range
                                             from -20 (most favorable to the
                                             process) to 19 (least favorable
                                             to the process). The default does
                                             not modify priority.
ionice_class              None               I/O scheduling class of server
                                             processes. I/O niceness class
                                             values are IOPRIO_CLASS_RT (realtime),
                                             IOPRIO_CLASS_BE (best-effort),
                                             and IOPRIO_CLASS_IDLE (idle).
                                             The default does not modify class and
                                             priority. Linux supports io scheduling
                                             priorities and classes since 2.6.13 with
                                             the CFQ io scheduler.
                                             Work only with ionice_priority.
ionice_priority           None               I/O scheduling priority of server
                                             processes. I/O niceness priority is
                                             a number which goes from 0 to 7.
                                             The higher the value, the lower
                                             the I/O priority of the process.
                                             Work only with ionice_class.
                                             Ignored if IOPRIO_CLASS_IDLE is set.
========================  =================  ==================================

*******************
[container-auditor]
*******************

=====================  =================  =======================================
Option                 Default            Description
---------------------  -----------------  ---------------------------------------
log_name               container-auditor  Label used when logging
log_facility           LOG_LOCAL0         Syslog log facility
log_level              INFO               Logging level
log_address            /dev/log           Logging directory
interval               1800               Minimum time for a pass to take
containers_per_second  200                Maximum containers audited per second.
                                          Should be tuned according to individual
                                          system specs. 0 is unlimited.
recon_cache_path       /var/cache/swift   Path to recon cache
nice_priority          None               Scheduling priority of server processes.
                                          Niceness values range from -20 (most
                                          favorable to the process) to 19 (least
                                          favorable to the process). The default
                                          does not modify priority.
ionice_class           None               I/O scheduling class of server processes.
                                          I/O niceness class values are
                                          IOPRIO_CLASS_RT (realtime),
                                          IOPRIO_CLASS_BE (best-effort),
                                          and IOPRIO_CLASS_IDLE (idle).
                                          The default does not modify class and
                                          priority. Linux supports io scheduling
                                          priorities and classes since 2.6.13 with
                                          the CFQ io scheduler.
                                          Work only with ionice_priority.
ionice_priority        None               I/O scheduling priority of server
                                          processes. I/O niceness priority is
                                          a number which goes from 0 to 7.
                                          The higher the value, the lower the I/O
                                          priority of the process. Work only with
                                          ionice_class.
                                          Ignored if IOPRIO_CLASS_IDLE is set.
=====================  =================  =======================================

----------------------------
Account Server Configuration
----------------------------

An example Account Server configuration can be found at
etc/account-server.conf-sample in the source code repository.

The following configuration sections are available:

* :ref:`[DEFAULT] <account_server_default_options>`
* `[account-server]`_
* `[account-replicator]`_
* `[account-auditor]`_
* `[account-reaper]`_

.. _account_server_default_options:

*********
[DEFAULT]
*********

===============================  ==========  =============================================
Option                           Default     Description
-------------------------------  ----------  ---------------------------------------------
swift_dir                        /etc/swift  Swift configuration directory
devices                          /srv/node   Parent directory or where devices are mounted
mount_check                      true        Whether or not check if the devices are
                                             mounted to prevent accidentally writing
                                             to the root device
bind_ip                          0.0.0.0     IP Address for server to bind to
bind_port                        6202        Port for server to bind to
keep_idle                        600         Value to set for socket TCP_KEEPIDLE
bind_timeout                     30          Seconds to attempt bind before giving up
backlog                          4096        Maximum number of allowed pending
                                             connections
workers                          auto        Override the number of pre-forked workers
                                             that will accept connections.  If set it
                                             should be an integer, zero means no fork.  If
                                             unset, it will try to default to the number
                                             of effective cpu cores and fallback to one.
                                             Increasing the number of workers may reduce
                                             the possibility of slow file system
                                             operations in one request from negatively
                                             impacting other requests.  See
                                             :ref:`general-service-tuning`.
max_clients                      1024        Maximum number of clients one worker can
                                             process simultaneously (it will actually
                                             accept(2) N + 1). Setting this to one (1)
                                             will only handle one request at a time,
                                             without accepting another request
                                             concurrently.
user                             swift       User to run as
db_preallocation                 off         If you don't mind the extra disk space usage in
                                             overhead, you can turn this on to preallocate
                                             disk space with SQLite databases to decrease
                                             fragmentation.
disable_fallocate                false       Disable "fast fail" fallocate checks if the
                                             underlying filesystem does not support it.
log_name                         swift       Label used when logging
log_facility                     LOG_LOCAL0  Syslog log facility
log_level                        INFO        Logging level
log_address                      /dev/log    Logging directory
log_max_line_length              0           Caps the length of log lines to the
                                             value given; no limit if set to 0, the
                                             default.
log_custom_handlers              None        Comma-separated list of functions to call
                                             to setup custom log handlers.
log_udp_host                                 Override log_address
log_udp_port                     514         UDP log port
log_statsd_host                  None        Enables StatsD logging; IPv4/IPv6
                                             address or a hostname.  If a
                                             hostname resolves to an IPv4 and IPv6
                                             address, the IPv4 address will be
                                             used.
log_statsd_port                  8125
log_statsd_default_sample_rate   1.0
log_statsd_sample_rate_factor    1.0
log_statsd_metric_prefix
eventlet_debug                   false       If true, turn on debug logging for eventlet
fallocate_reserve                1%          You can set fallocate_reserve to the
                                             number of bytes or percentage of disk
                                             space you'd like fallocate to reserve,
                                             whether there is space for the given
                                             file size or not. Percentage will be used
                                             if the value ends with a '%'. This is
                                             useful for systems that behave badly when
                                             they completely run out of space; you can
                                             make the services pretend they're out of
                                             space early.
nice_priority                    None        Scheduling priority of server processes.
                                             Niceness values range from -20 (most
                                             favorable to the process) to 19 (least
                                             favorable to the process). The default
                                             does not modify priority.
ionice_class                     None        I/O scheduling class of server processes.
                                             I/O niceness class values are IOPRIO_CLASS_RT
                                             (realtime), IOPRIO_CLASS_BE (best-effort),
                                             and IOPRIO_CLASS_IDLE (idle).
                                             The default does not modify class and
                                             priority. Linux supports io scheduling
                                             priorities and classes since 2.6.13 with
                                             the CFQ io scheduler.
                                             Work only with ionice_priority.
ionice_priority                  None        I/O scheduling priority of server processes.
                                             I/O niceness priority is a number which
                                             goes from 0 to 7. The higher the value,
                                             the lower the I/O priority of the process.
                                             Work only with ionice_class.
                                             Ignored if IOPRIO_CLASS_IDLE is set.
===============================  ==========  =============================================

****************
[account-server]
****************

=============================  ==============  ==========================================
Option                         Default         Description
-----------------------------  --------------  ------------------------------------------
use                                            Entry point for paste.deploy for the account
                                               server.  For most cases, this should be
                                               ``egg:swift#account``.
set log_name                   account-server  Label used when logging
set log_facility               LOG_LOCAL0      Syslog log facility
set log_level                  INFO            Logging level
set log_requests               True            Whether or not to log each
                                               request
set log_address                /dev/log        Logging directory
replication_server                             Configure parameter for creating
                                               specific server. To handle all verbs,
                                               including replication verbs, do not
                                               specify "replication_server"
                                               (this is the default). To only
                                               handle replication, set to a True
                                               value (e.g. "True" or "1").
                                               To handle only non-replication
                                               verbs, set to "False". Unless you
                                               have a separate replication network, you
                                               should not specify any value for
                                               "replication_server".
nice_priority                  None            Scheduling priority of server processes.
                                               Niceness values range from -20 (most
                                               favorable to the process) to 19 (least
                                               favorable to the process). The default
                                               does not modify priority.
ionice_class                   None            I/O scheduling class of server processes.
                                               I/O niceness class values are IOPRIO_CLASS_RT
                                               (realtime), IOPRIO_CLASS_BE (best-effort),
                                               and IOPRIO_CLASS_IDLE (idle).
                                               The default does not modify class and
                                               priority. Linux supports io scheduling
                                               priorities and classes since 2.6.13 with
                                               the CFQ io scheduler.
                                               Work only with ionice_priority.
ionice_priority                None            I/O scheduling priority of server
                                               processes. I/O niceness priority is
                                               a number which goes from 0 to 7.
                                               The higher the value, the lower the I/O
                                               priority of the process. Work only with
                                               ionice_class.
                                               Ignored if IOPRIO_CLASS_IDLE is set.
=============================  ==============  ==========================================

********************
[account-replicator]
********************

==================== =========================  ===============================
Option               Default                    Description
-------------------- -------------------------  -------------------------------
log_name             account-replicator         Label used when logging
log_facility         LOG_LOCAL0                 Syslog log facility
log_level            INFO                       Logging level
log_address          /dev/log                   Logging directory
per_diff             1000                       Maximum number of database rows
                                                that will be sync'd in a single
                                                HTTP replication request.
                                                Databases with less than or
                                                equal to this number of
                                                differing rows will always be
                                                sync'd using an HTTP replication
                                                request rather than using rsync.
max_diffs            100                        Maximum number of HTTP
                                                replication requests attempted
                                                on each replication pass for any
                                                one container. This caps how
                                                long the replicator will spend
                                                trying to sync a given database
                                                per pass so the other databases
                                                don't get starved.
concurrency          8                          Number of replication workers
                                                to spawn
interval             30                         Time in seconds to wait between
                                                replication passes
databases_per_second 50                         Maximum databases to process
                                                per second.  Should be tuned
                                                according to individual
                                                system specs.  0 is unlimited.
node_timeout         10                         Request timeout to external
                                                services
conn_timeout         0.5                        Connection timeout to external
                                                services
reclaim_age          604800                     Time elapsed in seconds before
                                                an account can be reclaimed
rsync_module         {replication_ip}::account  Format of the rsync module where
                                                the replicator will send data.
                                                The configuration value can
                                                include some variables that will
                                                be extracted from the ring.
                                                Variables must follow the format
                                                {NAME} where NAME is one of: ip,
                                                port, replication_ip,
                                                replication_port, region, zone,
                                                device, meta. See
                                                etc/rsyncd.conf-sample for some
                                                examples.
rsync_compress       no                         Allow rsync to compress data
                                                which is transmitted to
                                                destination node during sync.
                                                However, this is applicable only
                                                when destination node is in a
                                                different region than the local
                                                one. NOTE: Objects that are
                                                already compressed (for example:
                                                .tar.gz, mp3) might slow down
                                                the syncing process.
recon_cache_path     /var/cache/swift           Path to recon cache
nice_priority        None                       Scheduling priority of server
                                                processes. Niceness values
                                                range from -20 (most favorable
                                                to the process) to 19 (least
                                                favorable to the process).
                                                The default does not modify
                                                priority.
ionice_class         None                       I/O scheduling class of server
                                                processes. I/O niceness class
                                                values are IOPRIO_CLASS_RT
                                                (realtime), IOPRIO_CLASS_BE
                                                (best-effort), and IOPRIO_CLASS_IDLE
                                                (idle).
                                                The default does not modify
                                                class and priority. Linux supports
                                                io scheduling priorities and classes
                                                since 2.6.13 with the CFQ io scheduler.
                                                Work only with ionice_priority.
ionice_priority      None                       I/O scheduling priority of server
                                                processes. I/O niceness priority
                                                is a number which goes from 0 to 7.
                                                The higher the value, the lower
                                                the I/O priority of the process.
                                                Work only with ionice_class.
                                                Ignored if IOPRIO_CLASS_IDLE
                                                is set.
==================== =========================  ===============================

*****************
[account-auditor]
*****************

====================  ================  =======================================
Option                Default           Description
--------------------  ----------------  ---------------------------------------
log_name              account-auditor   Label used when logging
log_facility          LOG_LOCAL0        Syslog log facility
log_level             INFO              Logging level
log_address           /dev/log          Logging directory
interval              1800              Minimum time for a pass to take
accounts_per_second   200               Maximum accounts audited per second.
                                        Should be tuned according to individual
                                        system specs. 0 is unlimited.
recon_cache_path      /var/cache/swift  Path to recon cache
nice_priority         None              Scheduling priority of server processes.
                                        Niceness values range from -20 (most
                                        favorable to the process) to 19 (least
                                        favorable to the process). The default
                                        does not modify priority.
ionice_class          None              I/O scheduling class of server processes.
                                        I/O niceness class values are
                                        IOPRIO_CLASS_RT (realtime),
                                        IOPRIO_CLASS_BE (best-effort),
                                        and IOPRIO_CLASS_IDLE (idle).
                                        The default does not modify class and
                                        priority. Linux supports io scheduling
                                        priorities and classes since 2.6.13 with
                                        the CFQ io scheduler.
                                        Work only with ionice_priority.
ionice_priority       None              I/O scheduling priority of server
                                        processes. I/O niceness priority is
                                        a number which goes from 0 to 7.
                                        The higher the value, the lower the I/O
                                        priority of the process. Work only with
                                        ionice_class.
                                        Ignored if IOPRIO_CLASS_IDLE is set.
====================  ================  =======================================

****************
[account-reaper]
****************

==================  ===============  =========================================
Option              Default          Description
------------------  ---------------  -----------------------------------------
log_name            account-reaper   Label used when logging
log_facility        LOG_LOCAL0       Syslog log facility
log_level           INFO             Logging level
log_address         /dev/log         Logging directory
concurrency         25               Number of replication workers to spawn
interval            3600             Minimum time for a pass to take
node_timeout        10               Request timeout to external services
conn_timeout        0.5              Connection timeout to external services
delay_reaping       0                Normally, the reaper begins deleting
                                     account information for deleted accounts
                                     immediately; you can set this to delay
                                     its work however. The value is in seconds,
                                     2592000 = 30 days, for example. The sum of
                                     this value and the container-updater
                                     ``interval`` should be less than the
                                     account-replicator ``reclaim_age``. This
                                     ensures that once the account-reaper has
                                     deleted a container there is sufficient
                                     time for the container-updater to report
                                     to the account before the account DB is
                                     removed.
reap_warn_after     2892000          If the account fails to be reaped due
                                     to a persistent error, the account reaper
                                     will log a message such as:
                                     Account <name> has not been reaped since <date>
                                     You can search logs for this message if
                                     space is not being reclaimed after you
                                     delete account(s). This is in addition to
                                     any time requested by delay_reaping.
nice_priority       None             Scheduling priority of server processes.
                                     Niceness values range from -20 (most
                                     favorable to the process) to 19 (least
                                     favorable to the process). The default
                                     does not modify priority.
ionice_class        None             I/O scheduling class of server processes.
                                     I/O niceness class values are IOPRIO_CLASS_RT
                                     (realtime), IOPRIO_CLASS_BE (best-effort),
                                     and IOPRIO_CLASS_IDLE (idle).
                                     The default does not modify class and
                                     priority. Linux supports io scheduling
                                     priorities and classes since 2.6.13 with
                                     the CFQ io scheduler.
                                     Work only with ionice_priority.
ionice_priority     None             I/O scheduling priority of server
                                     processes. I/O niceness priority is
                                     a number which goes from 0 to 7.
                                     The higher the value, the lower the I/O
                                     priority of the process. Work only with
                                     ionice_class.
                                     Ignored if IOPRIO_CLASS_IDLE is set.
==================  ===============  =========================================

.. _proxy-server-config:

--------------------------
Proxy Server Configuration
--------------------------

An example Proxy Server configuration can be found at
etc/proxy-server.conf-sample in the source code repository.

The following configuration sections are available:

* :ref:`[DEFAULT] <proxy_server_default_options>`
* `[proxy-server]`_
* Individual sections for `Proxy middlewares`_

.. _proxy_server_default_options:

*********
[DEFAULT]
*********

====================================  ========================  ========================================
Option                                Default                   Description
------------------------------------  ------------------------  ----------------------------------------
bind_ip                               0.0.0.0                   IP Address for server to
                                                                bind to
bind_port                             80                        Port for server to bind to
keep_idle                             600                       Value to set for socket TCP_KEEPIDLE
bind_timeout                          30                        Seconds to attempt bind before
                                                                giving up
backlog                               4096                      Maximum number of allowed pending
                                                                connections
swift_dir                             /etc/swift                Swift configuration directory
workers                               auto                      Override the number of
                                                                pre-forked workers that will
                                                                accept connections.  If set it
                                                                should be an integer, zero
                                                                means no fork.  If unset, it
                                                                will try to default to the
                                                                number of effective cpu cores
                                                                and fallback to one.  See
                                                                :ref:`general-service-tuning`.
max_clients                           1024                      Maximum number of clients one
                                                                worker can process
                                                                simultaneously (it will
                                                                actually accept(2) N +
                                                                1). Setting this to one (1)
                                                                will only handle one request at
                                                                a time, without accepting
                                                                another request
                                                                concurrently.
user                                  swift                     User to run as
cert_file                                                       Path to the ssl .crt. This
                                                                should be enabled for testing
                                                                purposes only.
key_file                                                        Path to the ssl .key. This
                                                                should be enabled for testing
                                                                purposes only.
cors_allow_origin                                               List of origin hosts that are allowed
                                                                for CORS requests in addition to what
                                                                the container has set.
strict_cors_mode                      True                      If True (default) then CORS
                                                                requests are only allowed if their
                                                                Origin header matches an allowed
                                                                origin. Otherwise, any Origin is
                                                                allowed.
cors_expose_headers                                             This is a list of headers that
                                                                are included in the header
                                                                Access-Control-Expose-Headers
                                                                in addition to what the container
                                                                has set.
client_timeout                        60
trans_id_suffix                                                 This optional suffix (default is empty)
                                                                that would be appended to the swift
                                                                transaction id allows one to easily
                                                                figure out from which cluster that
                                                                X-Trans-Id belongs to. This is very
                                                                useful when one is managing more than
                                                                one swift cluster.
log_name                              swift                     Label used when logging
log_facility                          LOG_LOCAL0                Syslog log facility
log_level                             INFO                      Logging level
log_headers                           False
log_address                           /dev/log                  Logging directory
log_max_line_length                   0                         Caps the length of log
                                                                lines to the value given;
                                                                no limit if set to 0, the
                                                                default.
log_custom_handlers                   None                      Comma separated list of functions
                                                                to call to setup custom log
                                                                handlers.
log_udp_host                                                    Override log_address
log_udp_port                          514                       UDP log port
log_statsd_host                       None                      Enables StatsD logging; IPv4/IPv6
                                                                address or a hostname.  If a
                                                                hostname resolves to an IPv4 and IPv6
                                                                address, the IPv4 address will be
                                                                used.
log_statsd_port                       8125
log_statsd_default_sample_rate        1.0
log_statsd_sample_rate_factor         1.0
log_statsd_metric_prefix
eventlet_debug                        false                     If true, turn on debug logging
                                                                for eventlet

expose_info                           true                      Enables exposing configuration
                                                                settings via HTTP GET /info.
admin_key                                                       Key to use for admin calls that
                                                                are HMAC signed.  Default
                                                                is empty, which will
                                                                disable admin calls to
                                                                /info.
disallowed_sections                   swift.valid_api_versions  Allows the ability to withhold
                                                                sections from showing up in the
                                                                public calls to /info. You can
                                                                withhold subsections by separating
                                                                the dict level with a ".".
expiring_objects_container_divisor    86400
expiring_objects_account_name         expiring_objects
nice_priority                         None                      Scheduling priority of server
                                                                processes.
                                                                Niceness values range from -20 (most
                                                                favorable to the process) to 19 (least
                                                                favorable to the process). The default
                                                                does not modify priority.
ionice_class                          None                      I/O scheduling class of server
                                                                processes. I/O niceness class values
                                                                are IOPRIO_CLASS_RT (realtime),
                                                                IOPRIO_CLASS_BE (best-effort) and
                                                                IOPRIO_CLASS_IDLE (idle).
                                                                The default does not
                                                                modify class and priority. Linux
                                                                supports io scheduling priorities
                                                                and classes since 2.6.13 with
                                                                the CFQ io scheduler.
                                                                Work only with ionice_priority.
ionice_priority                       None                      I/O scheduling priority of server
                                                                processes. I/O niceness priority is
                                                                a number which goes from 0 to 7.
                                                                The higher the value, the lower
                                                                the I/O priority of the process.
                                                                Work only with ionice_class.
                                                                Ignored if IOPRIO_CLASS_IDLE is set.
====================================  ========================  ========================================

**************
[proxy-server]
**************

======================================  ===============  =====================================
Option                                  Default          Description
--------------------------------------  ---------------  -------------------------------------
use                                                      Entry point for paste.deploy for
                                                         the proxy server.  For most
                                                         cases, this should be
                                                         ``egg:swift#proxy``.
set log_name                            proxy-server     Label used when logging
set log_facility                        LOG_LOCAL0       Syslog log facility
set log_level                           INFO             Log level
set log_headers                         True             If True, log headers in each
                                                         request
set log_handoffs                        True             If True, the proxy will log
                                                         whenever it has to failover to a
                                                         handoff node
recheck_account_existence               60               Cache timeout in seconds to
                                                         send memcached for account
                                                         existence
recheck_container_existence             60               Cache timeout in seconds to
                                                         send memcached for container
                                                         existence
object_chunk_size                       65536            Chunk size to read from
                                                         object servers
client_chunk_size                       65536            Chunk size to read from
                                                         clients
memcache_servers                        127.0.0.1:11211  Comma separated list of
                                                         memcached servers
                                                         ip:port or [ipv6addr]:port
memcache_max_connections                2                Max number of connections to
                                                         each memcached server per
                                                         worker
node_timeout                            10               Request timeout to external
                                                         services
recoverable_node_timeout                node_timeout     Request timeout to external
                                                         services for requests that, on
                                                         failure, can be recovered
                                                         from. For example, object GET.
client_timeout                          60               Timeout to read one chunk
                                                         from a client
conn_timeout                            0.5              Connection timeout to
                                                         external services
error_suppression_interval              60               Time in seconds that must
                                                         elapse since the last error
                                                         for a node to be considered
                                                         no longer error limited
error_suppression_limit                 10               Error count to consider a
                                                         node error limited
allow_account_management                false            Whether account PUTs and DELETEs
                                                         are even callable
account_autocreate                      false            If set to 'true' authorized
                                                         accounts that do not yet exist
                                                         within the Swift cluster will
                                                         be automatically created.
max_containers_per_account              0                If set to a positive value,
                                                         trying to create a container
                                                         when the account already has at
                                                         least this maximum containers
                                                         will result in a 403 Forbidden.
                                                         Note: This is a soft limit,
                                                         meaning a user might exceed the
                                                         cap for
                                                         recheck_account_existence before
                                                         the 403s kick in.
max_containers_whitelist                                 This is a comma separated list
                                                         of account names that ignore
                                                         the max_containers_per_account
                                                         cap.
rate_limit_after_segment                10               Rate limit the download of
                                                         large object segments after
                                                         this segment is downloaded.
rate_limit_segments_per_sec             1                Rate limit large object
                                                         downloads at this rate.
request_node_count                      2 * replicas     Set to the number of nodes to
                                                         contact for a normal request.
                                                         You can use '* replicas' at the
                                                         end to have it use the number
                                                         given times the number of
                                                         replicas for the ring being used
                                                         for the request.
swift_owner_headers                     <see the sample  These are the headers whose
                                        conf file for    values will only be shown to
                                        the list of      swift_owners. The exact
                                        default          definition of a swift_owner is
                                        headers>         up to the auth system in use,
                                                         but usually indicates
                                                         administrative responsibilities.
sorting_method                          shuffle          Storage nodes can be chosen at
                                                         random (shuffle), by using timing
                                                         measurements (timing), or by using
                                                         an explicit match (affinity).
                                                         Using timing measurements may allow
                                                         for lower overall latency, while
                                                         using affinity allows for finer
                                                         control. In both the timing and
                                                         affinity cases, equally-sorting nodes
                                                         are still randomly chosen to spread
                                                         load. This option may be overridden
                                                         in a per-policy configuration
                                                         section.
timing_expiry                           300              If the "timing" sorting_method is
                                                         used, the timings will only be valid
                                                         for the number of seconds configured
                                                         by timing_expiry.
concurrent_gets                         off              Use replica count number of
                                                         threads concurrently during a
                                                         GET/HEAD and return with the
                                                         first successful response. In
                                                         the EC case, this parameter only
                                                         affects an EC HEAD as an EC GET
                                                         behaves differently.
concurrency_timeout                     conn_timeout     This parameter controls how long
                                                         to wait before firing off the
                                                         next concurrent_get thread. A
                                                         value of 0 would we fully concurrent,
                                                         any other number will stagger the
                                                         firing of the threads. This number
                                                         should be between 0 and node_timeout.
                                                         The default is conn_timeout (0.5).
nice_priority                           None             Scheduling priority of server
                                                         processes.
                                                         Niceness values range from -20 (most
                                                         favorable to the process) to 19 (least
                                                         favorable to the process). The default
                                                         does not modify priority.
ionice_class                            None             I/O scheduling class of server
                                                         processes. I/O niceness class values
                                                         are IOPRIO_CLASS_RT (realtime),
                                                         IOPRIO_CLASS_BE (best-effort),
                                                         and IOPRIO_CLASS_IDLE (idle).
                                                         The default does not modify class and
                                                         priority. Linux supports io scheduling
                                                         priorities and classes since 2.6.13
                                                         with the CFQ io scheduler.
                                                         Work only with ionice_priority.
ionice_priority                         None             I/O scheduling priority of server
                                                         processes. I/O niceness priority is
                                                         a number which goes from 0 to 7.
                                                         The higher the value, the lower the
                                                         I/O priority of the process. Work
                                                         only with ionice_class.
                                                         Ignored if IOPRIO_CLASS_IDLE is set.
read_affinity                           None             Specifies which backend servers to
                                                         prefer on reads; used in conjunction
                                                         with the sorting_method option being
                                                         set to 'affinity'. Format is a comma
                                                         separated list of affinity descriptors
                                                         of the form <selection>=<priority>.
                                                         The <selection> may be r<N> for
                                                         selecting nodes in region N or
                                                         r<N>z<M> for selecting nodes in
                                                         region N, zone M. The <priority>
                                                         value should be a whole number
                                                         that represents the priority to
                                                         be given to the selection; lower
                                                         numbers are higher priority.
                                                         Default is empty, meaning no
                                                         preference. This option may be
                                                         overridden in a per-policy
                                                         configuration section.
write_affinity                          None             Specifies which backend servers to
                                                         prefer on writes. Format is a comma
                                                         separated list of affinity
                                                         descriptors of the form r<N> for
                                                         region N or r<N>z<M> for region N,
                                                         zone M. Default is empty, meaning no
                                                         preference. This option may be
                                                         overridden in a per-policy
                                                         configuration section.
write_affinity_node_count               2 * replicas     The number of local (as governed by
                                                         the write_affinity setting) nodes to
                                                         attempt to contact first on writes,
                                                         before any non-local ones. The value
                                                         should be an integer number, or use
                                                         '* replicas' at the end to have it
                                                         use the number given times the number
                                                         of replicas for the ring being used
                                                         for the request. This option may be
                                                         overridden in a per-policy
                                                         configuration section.
write_affinity_handoff_delete_count     auto             The number of local (as governed by
                                                         the write_affinity setting) handoff
                                                         nodes to attempt to contact on
                                                         deletion, in addition to primary
                                                         nodes. Example: in geographically
                                                         distributed deployment, If replicas=3,
                                                         sometimes there may be 1 primary node
                                                         and 2 local handoff nodes in one region
                                                         holding the object after uploading but
                                                         before object replicated to the
                                                         appropriate locations in other regions.
                                                         In this case, include these handoff
                                                         nodes to send request when deleting
                                                         object could help make correct decision
                                                         for the response. The default value 'auto'
                                                         means Swift will calculate the number
                                                         automatically, the default value is
                                                         (replicas - len(local_primary_nodes)).
                                                         This option may be overridden in a
                                                         per-policy configuration section.
======================================  ===============  =====================================

.. _proxy_server_per_policy_config:

************************
Per policy configuration
************************

Some proxy-server configuration options may be overridden for individual
:doc:`overview_policies` by including per-policy config section(s). These
options are:

- ``sorting_method``
- ``read_affinity``
- ``write_affinity``
- ``write_affinity_node_count``
- ``write_affinity_handoff_delete_count``

The per-policy config section name must be of the form::

    [proxy-server:policy:<policy index>]

.. note::

    The per-policy config section name should refer to the policy index, not
    the policy name.

.. note::

    The first part of proxy-server config section name must match the name of
    the proxy-server config section. This is typically ``proxy-server`` as
    shown above, but if different then the names of any per-policy config
    sections must be changed accordingly.

The value of an option specified in a per-policy section will override any
value given in the proxy-server section for that policy only. Otherwise the
value of these options will be that specified in the proxy-server section.

For example, the following section provides policy-specific options for a
policy with index ``3``::

    [proxy-server:policy:3]
    sorting_method = affinity
    read_affinity = r2=1
    write_affinity = r2
    write_affinity_node_count = 1 * replicas
    write_affinity_handoff_delete_count = 2

.. note::

    It is recommended that per-policy config options are *not* included in the
    ``[DEFAULT]`` section. If they are then the following behavior applies.

    Per-policy config sections will inherit options in the ``[DEFAULT]``
    section of the config file, and any such inheritance will take precedence
    over inheriting options from the proxy-server config section.

    Per-policy config section options will override options in the
    ``[DEFAULT]`` section. Unlike the behavior described under `General Server
    Configuration`_ for paste-deploy ``filter`` and ``app`` sections, the
    ``set`` keyword is not required for options to override in per-policy
    config sections.

    For example, given the following settings in a config file::

        [DEFAULT]
        sorting_method = affinity
        read_affinity = r0=100
        write_affinity = r0

        [app:proxy-server]
        use = egg:swift#proxy
        # use of set keyword here overrides [DEFAULT] option
        set read_affinity = r1=100
        # without set keyword, [DEFAULT] option overrides in a paste-deploy section
        write_affinity = r1

        [proxy-server:policy:0]
        sorting_method = affinity
        # set keyword not required here to override [DEFAULT] option
        write_affinity = r1

    would result in policy with index ``0`` having settings:

    * ``read_affinity = r0=100`` (inherited from the ``[DEFAULT]`` section)
    * ``write_affinity = r1`` (specified in the policy 0 section)

    and any other policy would have the default settings of:

    * ``read_affinity = r1=100`` (set in the proxy-server section)
    * ``write_affinity = r0`` (inherited from the ``[DEFAULT]`` section)

*****************
Proxy Middlewares
*****************

Many features in Swift are implemented as middleware in the proxy-server
pipeline. See :doc:`middleware` and the ``proxy-server.conf-sample`` file for
more information. In particular, the use of some type of :doc:`authentication
and authorization middleware <overview_auth>` is highly recommended.


------------------------
Memcached Considerations
------------------------

Several of the Services rely on Memcached for caching certain types of
lookups, such as auth tokens, and container/account existence.  Swift does
not do any caching of actual object data.  Memcached should be able to run
on any servers that have available RAM and CPU.  At Rackspace, we run
Memcached on the proxy servers.  The ``memcache_servers`` config option
in the ``proxy-server.conf`` should contain all memcached servers.

-----------
System Time
-----------

Time may be relative but it is relatively important for Swift!  Swift uses
timestamps to determine which is the most recent version of an object.
It is very important for the system time on each server in the cluster to
by synced as closely as possible (more so for the proxy server, but in general
it is a good idea for all the servers).  At Rackspace, we use NTP with a local
NTP server to ensure that the system times are as close as possible.  This
should also be monitored to ensure that the times do not vary too much.

.. _general-service-tuning:

----------------------
General Service Tuning
----------------------

Most services support either a ``workers`` or ``concurrency`` value in the
settings.  This allows the services to make effective use of the cores
available. A good starting point to set the concurrency level for the proxy
and storage services to 2 times the number of cores available. If more than
one service is sharing a server, then some experimentation may be needed to
find the best balance.

At Rackspace, our Proxy servers have dual quad core processors, giving us 8
cores. Our testing has shown 16 workers to be a pretty good balance when
saturating a 10g network and gives good CPU utilization.

Our Storage server processes all run together on the same servers. These servers have
dual quad core processors, for 8 cores total. We run the Account, Container,
and Object servers with 8 workers each. Most of the background jobs are run at
a concurrency of 1, with the exception of the replicators which are run at a
concurrency of 2.

The ``max_clients`` parameter can be used to adjust the number of client
requests an individual worker accepts for processing. The fewer requests being
processed at one time, the less likely a request that consumes the worker's
CPU time, or blocks in the OS, will negatively impact other requests. The more
requests being processed at one time, the more likely one worker can utilize
network and disk capacity.

On systems that have more cores, and more memory, where one can afford to run
more workers, raising the number of workers and lowering the maximum number of
clients serviced per worker can lessen the impact of CPU intensive or stalled
requests.

The ``nice_priority`` parameter can be used to set program scheduling priority.
The ``ionice_class`` and ``ionice_priority`` parameters can be used to set I/O scheduling
class and priority on the systems that use an I/O scheduler that supports
I/O priorities. As at kernel 2.6.17 the only such scheduler is the Completely
Fair Queuing (CFQ) I/O scheduler. If you run your Storage servers all together
on the same servers, you can slow down the auditors or prioritize
object-server I/O via these parameters (but probably do not need to change
it on the proxy). It is a new feature and the best practices are still
being developed. On some systems it may be required to run the daemons as root.
For more info also see setpriority(2) and ioprio_set(2).

The above configuration setting should be taken as suggestions and testing
of configuration settings should be done to ensure best utilization of CPU,
network connectivity, and disk I/O.

-------------------------
Filesystem Considerations
-------------------------

Swift is designed to be mostly filesystem agnostic--the only requirement
being that the filesystem supports extended attributes (xattrs). After
thorough testing with our use cases and hardware configurations, XFS was
the best all-around choice. If you decide to use a filesystem other than
XFS, we highly recommend thorough testing.

For distros with more recent kernels (for example Ubuntu 12.04 Precise),
we recommend using the default settings (including the default inode size
of 256 bytes) when creating the file system::

    mkfs.xfs -L D1 /dev/sda1

In the last couple of years, XFS has made great improvements in how inodes
are allocated and used.  Using the default inode size no longer has an
impact on performance.

For distros with older kernels (for example Ubuntu 10.04 Lucid),
some settings can dramatically impact performance. We recommend the
following when creating the file system::

    mkfs.xfs -i size=1024 -L D1 /dev/sda1

Setting the inode size is important, as XFS stores xattr data in the inode.
If the metadata is too large to fit in the inode, a new extent is created,
which can cause quite a performance problem. Upping the inode size to 1024
bytes provides enough room to write the default metadata, plus a little
headroom.

The following example mount options are recommended when using XFS::

    mount -t xfs -o noatime -L D1 /srv/node/d1

We do not recommend running Swift on RAID, but if you are using
RAID it is also important to make sure that the proper sunit and swidth
settings get set so that XFS can make most efficient use of the RAID array.

For a standard Swift install, all data drives are mounted directly under
``/srv/node`` (as can be seen in the above example of mounting label ``D1``
as ``/srv/node/d1``). If you choose to mount the drives in another directory,
be sure to set the ``devices`` config option in all of the server configs to
point to the correct directory.

The mount points for each drive in ``/srv/node/`` should be owned by the root user
almost exclusively (``root:root 755``). This is required to prevent rsync from
syncing files into the root drive in the event a drive is unmounted.

Swift uses system calls to reserve space for new objects being written into
the system. If your filesystem does not support ``fallocate()`` or
``posix_fallocate()``, be sure to set the ``disable_fallocate = true`` config
parameter in account, container, and object server configs.

Most current Linux distributions ship with a default installation of updatedb.
This tool runs periodically and updates the file name database that is used by
the GNU locate tool. However, including Swift object and container database
files is most likely not required and the periodic update affects the
performance quite a bit. To disable the inclusion of these files add the path
where Swift stores its data to the setting PRUNEPATHS in ``/etc/updatedb.conf``::

    PRUNEPATHS="... /tmp ... /var/spool ... /srv/node"


---------------------
General System Tuning
---------------------

Rackspace currently runs Swift on Ubuntu Server 10.04, and the following
changes have been found to be useful for our use cases.

The following settings should be in ``/etc/sysctl.conf``::

    # disable TIME_WAIT.. wait..
    net.ipv4.tcp_tw_recycle=1
    net.ipv4.tcp_tw_reuse=1

    # disable syn cookies
    net.ipv4.tcp_syncookies = 0

    # double amount of allowed conntrack
    net.ipv4.netfilter.ip_conntrack_max = 262144

To load the updated sysctl settings, run ``sudo sysctl -p``.

A note about changing the TIME_WAIT values.  By default the OS will hold
a port open for 60 seconds to ensure that any remaining packets can be
received.  During high usage, and with the number of connections that are
created, it is easy to run out of ports.  We can change this since we are
in control of the network.  If you are not in control of the network, or
do not expect high loads, then you may not want to adjust those values.

----------------------
Logging Considerations
----------------------

Swift is set up to log directly to syslog. Every service can be configured
with the ``log_facility`` option to set the syslog log facility destination.
We recommended using syslog-ng to route the logs to specific log
files locally on the server and also to remote log collecting servers.
Additionally, custom log handlers can be used via the custom_log_handlers
setting.
