# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'gdm3' 2>/dev/null | grep -q '^installed'; then

login_banner_text='^Authorized[\s\n]+users[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.$'


# Multiple regexes transform the banner regex into a usable banner
# 0 - Remove anchors around the banner text
login_banner_text=$(echo "$login_banner_text" | sed 's/^\^\(.*\)\$$/\1/g')
# 1 - Keep only the first banners if there are multiple
#    (dod_banners contains the long and short banner)
login_banner_text=$(echo "$login_banner_text" | sed 's/^(\(.*\.\)|.*)$/\1/g')
# 2 - Add spaces ' '. (Transforms regex for "space or newline" into a " ")
login_banner_text=$(echo "$login_banner_text" | sed 's/\[\\s\\n\]+/ /g')
# 3 - Adds newline "tokens". (Transforms "(?:\[\\n\]+|(?:\\n)+)" into "(n)*")
login_banner_text=$(echo "$login_banner_text" | sed 's/(?:\[\\n\]+|(?:\\\\n)+)/(n)*/g')
# 4 - Remove any leftover backslash. (From any parethesis in the banner, for example).
login_banner_text=$(echo "$login_banner_text" | sed 's/\\//g')
# 5 - Removes the newline "token." (Transforms them into newline escape sequences "\n").
#    ( Needs to be done after 4, otherwise the escapce sequence will become just "n".
login_banner_text=$(echo "$login_banner_text" | sed 's/(n)\*/\\n/g')

mkdir -p /etc/dconf/profile
dconf_profile_path=/etc/dconf/profile/user

[[ -s "${dconf_profile_path}" ]] || echo > "${dconf_profile_path}"

if ! grep -Pzq "(?s)^\s*user-db:user.*\n\s*system-db:local" "${dconf_profile_path}"; then
    sed -i --follow-symlinks "1s/^/user-db:user\nsystem-db:local\n/" "${dconf_profile_path}"
fi

# Make sure the corresponding directories exist
mkdir -p /etc/dconf/db/local.d

# Make sure permissions allow regular users to read dconf settings.
# Also define the umask to avoid `dconf update` changing permissions.
chmod -R u=rwX,go=rX /etc/dconf/profile
(umask 0022 && dconf update)
mkdir -p /etc/dconf/profile
dconf_profile_path=/etc/dconf/profile/gdm

[[ -s "${dconf_profile_path}" ]] || echo > "${dconf_profile_path}"

if ! grep -Pzq "(?s)^\s*user-db:user.*\n\s*system-db:gdm" "${dconf_profile_path}"; then
    sed -i --follow-symlinks "1s/^/user-db:user\nsystem-db:gdm\n/" "${dconf_profile_path}"
fi

# Make sure the corresponding directories exist
mkdir -p /etc/dconf/db/gdm.d

# Make sure permissions allow regular users to read dconf settings.
# Also define the umask to avoid `dconf update` changing permissions.
chmod -R u=rwX,go=rX /etc/dconf/profile
(umask 0022 && dconf update)

# Will do both approach, since we plan to migrate to checks over dconf db. That way, future updates of the tool
# will pass the check even if we decide to check only for the dconf db path.
if [ -e "/etc/gdm3/greeter.dconf-defaults" ] ; then
    
    LC_ALL=C sed -i "/^\s*banner\-message\-text/Id" "/etc/gdm3/greeter.dconf-defaults"
else
    touch "/etc/gdm3/greeter.dconf-defaults"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/gdm3/greeter.dconf-defaults"

cp "/etc/gdm3/greeter.dconf-defaults" "/etc/gdm3/greeter.dconf-defaults.bak"
# Insert after the line matching the regex '\[org/gnome/login-screen\]'
line_number="$(LC_ALL=C grep -n "\[org/gnome/login-screen\]" "/etc/gdm3/greeter.dconf-defaults.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '\[org/gnome/login-screen\]', insert at
    # the end of the file.
    printf '%s\n' "banner-message-text='${login_banner_text}'" >> "/etc/gdm3/greeter.dconf-defaults"
else
    head -n "$(( line_number ))" "/etc/gdm3/greeter.dconf-defaults.bak" > "/etc/gdm3/greeter.dconf-defaults"
    printf '%s\n' "banner-message-text='${login_banner_text}'" >> "/etc/gdm3/greeter.dconf-defaults"
    tail -n "+$(( line_number + 1 ))" "/etc/gdm3/greeter.dconf-defaults.bak" >> "/etc/gdm3/greeter.dconf-defaults"
fi
# Clean up after ourselves.
rm "/etc/gdm3/greeter.dconf-defaults.bak"
# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/login-screen\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|gdm.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/gdm.d/00-security-settings"
DBDIR="/etc/dconf/db/gdm.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*banner-message-text\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)banner-message-text(\s*=)/#\1banner-message-text\2/g" "${SETTINGSFILES[@]}"
    fi
fi

[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/login-screen\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/login-screen]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "'${login_banner_text}'")"
if grep -q "^\\s*banner-message-text\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*banner-message-text\\s*=\\s*.*/banner-message-text=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/login-screen\\]|a\\banner-message-text=${escaped_value}" "${DCONFFILE}"
fi
# Make sure permissions allow regular users to read dconf settings.
# Also define the umask to avoid `dconf update` changing permissions.
chmod -R u=rwX,go=rX /etc/dconf/db
(umask 0022 && dconf update)
# No need to use dconf update, since bash_dconf_settings does that already

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi