ChangeLog for Cheese
--------------------

version 43.0

 - TODO

version 43.alpha

 - TODO

version 41.0
  - Allow headerbar to appear on all desktops
    Removed gtk_dialogs_use_header() and accompanying code to allow the
    headerbar to appear in GNOME as well as other desktops. Tested with
    XFCE and it works as expected.
    https://gitlab.gnome.org/GNOME/cheese/-/issues/62
  - Update to runtime 40 and some meta-data fixes
  - Reference of [GtkChild] fields is handled by GtkBuilder, type must
    be unowned
  - Change GLib.PtrArray into GLib.GenericArray
    This is the vala-friendly way of handling GPtrArray.
    Fix several memory leaks on the go and unnecessary reference increase.
  - libcheese: Fix critical on failing to load cropping cursor
    Loading a cursor can fail (`gdk_cursor_new_for_display()` can return
    `NULL`); avoid a critical warning in that case.
    Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
  - Allow device parameter to understand api.v4l2.path
    https://gitlab.gnome.org/GNOME/cheese/-/merge_requests/37
    https://gitlab.gnome.org/GNOME/cheese/-/issues/4
  - Update flatpak manifest and appdata
    Make the minimal required changes to build against the current SDK.
  - Remember last used camera
    During setup_camera() in cheese-application.vala, we were not explicitly
    assigning the camera from settings and only assigning the camera from
    the command line.

    This now checks for values from both the command line and from settings
    and allows the command line to override settings.

    Fixes: https://gitlab.gnome.org/GNOME/cheese/-/issues/76
  - Add documentation for new API
    Add gtk-doc documentation for
    cheese_camera_device_supported_format_caps().
  - Enable cameras with only MJPEG output
    This enables cameras like Sunplus Technology 1.3M Camera with vendor ID
    04fc and device ID 2802, which only outputs through image/jpeg and
    doesn't support raw output.
  - Preserve video/x-raw over image/jpeg
    gst_caps_simplify() doesn't preserve the original order of caps, so when
    called on the full set of caps, collected from all supported_formats, it
    may end up preferring image/jpeg caps even when video/x-raw with
    identical resolution and framerate is available.

    Simplify the caps coming from each of supported_formats separately, so
    that video/x-raw always comes first in the result GstCaps.

    We prefer raw camera output whenever possible in order to avoid decoding
    MJPEG.
  - Support camera video formats with MJPEG output
    This enables higher resolutions and framerates with cameras like
    Logitech C910, which can do e.g. 1920x1080 @ 30fps, but only through
    image/jpeg output.

    https://gitlab.gnome.org/GNOME/cheese/-/merge_requests/17
    https://gitlab.gnome.org/GNOME/cheese/-/issues/28
  - Show better error when file info query fails
  - Fix infinite loop if thumbnailer is not available
    The code in cheese_thumb_view_idle_append_item() in
    src/thumbview/cheese-thumb-view.c didn't pop the list of items to
    thumbnail if thumbnailing failed.

    Closes: #81
  - ci: Add CI
  - Added/Updated Translations
    - ca, courtesy of Gil Forcada
    - en_GB, courtesy of Zander Brown
    - fa, courtesy of Danial Behzadi
    - fur, courtesy of Fabio Tomat
    - gl, courtesy of Fran Dieguez
    - he, courtesy of Yosef Or Boczko
    - lo, courtesy of Saikeo Kavhanxay
    - ne, courtesy of Pawan Chitrakar
    - oc, courtesy of Quentin PAGÈS
    - pa, courtesy of A S Alam
    - pt, courtesy of Hugo Carvalho
    - ru, courtesy of Alexey Rubtsov
    - tr, courtesy of Çağatay Yiğit Şahin
    - vi, courtesy of Trần Ngọc Quân
    - zh_TW, courtesy of Cheng-Chia Tseng
  - Added/Updated Documentation
    - ca, courtesy of Jordi Mas i Hernàndez
    - es, courtesy of Daniel Mustieles
    - eu, courtesy of Asier Sarasua Garmendia
    - hu, courtesy of Balázs Meskó
    - ru, courtesy of Alexey Rubtsov
    - tr, courtesy of Emin Tufan Çetin

version 3.38.0
  - cheese: improve format parsing
    Check if both width and height are of the expected value type.

    Check if width and height are > 0 before adding the format as a
    valid format. Adding 0x0 resolutions causes a divide by 0 later
    when we calculate aspect ratios.
  - Add 'camera' and 'selfie' keywords to .desktop file
    These both seems like search terms people are likely to use when looking
    for this app.
  - Fix keyboard shortcut window being displayed twice
    https://gitlab.gnome.org/GNOME/cheese/-/issues/57
  - App icon: minor refinements
  - Added/Updated Translations
    - ca, courtesy of Gil Forcada
    - ckb, courtesy of Jwtiyar Nariman
    - cs, courtesy of Marek Černocký
    - da, courtesy of Alan Mortensen
    - de, courtesy of Tim Sabsch
    - el, courtesy of Efstathios Iosifidis
    - es, courtesy of Daniel Mustieles
    - eu, courtesy of Asier Sarasua Garmendia
    - fa, courtesy of Arash Mousavi
    - fi, courtesy of Jiri Grönroos
    - fr, courtesy of Julien Humbert
    - fur, courtesy of Fabio Tomat
    - gl, courtesy of Fran Dieguez
    - hi, courtesy of G Karunakar
    - hr, courtesy of gogo
    - hu, courtesy of Meskó Balázs
    - id, courtesy of Kukuh Syafaat
    - it, courtesy of Milo Casagrande
    - ja, courtesy of sicklylife
    - kk, courtesy of Baurzhan Muftakhidinov
    - ko, courtesy of Changwoo Ryu
    - lo, courtesy of "Last-Translator: \n"
    - lt, courtesy of Aurimas Černius
    - lv, courtesy of Rūdolfs Mazurs
    - ms, courtesy of abuyop
    - nb, courtesy of Kjartan Maraas
    - nl, courtesy of Nathan Follens
    - pl, courtesy of Piotr Drąg
    - pt_BR, courtesy of Rafael Fontenelle
    - pt, courtesy of Juliano Camargo
    - ro, courtesy of Florentina Mușat
    - sk, courtesy of Dušan Kazik
    - sl, courtesy of Matej Urbančič
    - sr, courtesy of Марко М. Костић
    - sv, courtesy of Anders Jonsson
    - ta, courtesy of Lakshmanan
    - tr, courtesy of Çağatay Yiğit Şahin
    - uk, courtesy of Yuri Chornoivan
    - zh_CN, courtesy of Dingzhong Chen
    - zh_TW, courtesy of pan93412
  - Added/Updated Documentation
    - ca, courtesy of Jordi Mas i Hernàndez
    - cs, courtesy of Marek Černocký
    - da, courtesy of "Last-Translator: scootergrisen\n"
    - de, courtesy of Christian Kirbach
    - es, courtesy of Daniel Mustieles
    - fr, courtesy of Charles Monzat
    - gl, courtesy of Fran Diéguez
    - id, courtesy of Andika Triwidada
    - ko, courtesy of Changwoo Ryu
    - pl, courtesy of Piotr Drąg
    - pt_BR, courtesy of Fábio Nogueira
    - sv, courtesy of Anders Jonsson
    - uk, courtesy of Yuri Chornoivan
    - zh_CN, courtesy of Mandy Wang

version 3.34.0
  - build: Don't use 'lib' prefix in find_library
    Meson passes it directly to -l option, so an extra 'lib' can cause error
    because it tells the linker to find liblibcanberra-gtk3.so.
  - Add translator comments to the desktop file
  - Added/Updated Translations
    - ca, courtesy of Gil Forcada
    - cs, courtesy of Marek Černocký
    - en_GB, courtesy of Bruce Cowan
    - fa, courtesy of Arash Mousavi
    - fi, courtesy of Jiri Grönroos
    - gl, courtesy of Fran Dieguez
    - it, courtesy of Milo Casagrande
    - ja, courtesy of sicklylife
    - ko, courtesy of Changwoo Ryu
    - lt, courtesy of Aurimas Černius
    - lv, courtesy of Rūdolfs Mazurs
    - pl, courtesy of Piotr Drąg
    - sr, courtesy of Марко М. Костић
    - tr, courtesy of Çağatay Yiğit Şahin
    - vi, courtesy of Trần Ngọc Quân

version 3.33.91
  - Drop libcanberra-gtk (GTK 2) dependency introduced in previous release

version 3.33.90
  - Switch to meson build system (thanks Iñigo!)
  - New app icon
  - New keyboard shortcuts window
  - Many updated translations

version 3.32.0
  - Added/Updated Translations
    - cs, courtesy of Marek Černocký
    - da, courtesy of Alan Mortensen
    - de, courtesy of Tim Sabsch
    - el, courtesy of Efstathios Iosifidis
    - es, courtesy of Daniel Mustieles
    - et, courtesy of Mart Raudsepp
    - fi, courtesy of Jiri Grönroos
    - fr, courtesy of Charles Monzat
    - fur, courtesy of Fabio Tomat
    - gl, courtesy of Fran Dieguez
    - hu, courtesy of Balázs Úr
    - id, courtesy of Kukuh Syafaat
    - it, courtesy of Milo Casagrande
    - ja, courtesy of sicklylife
    - kk, courtesy of Baurzhan Muftakhidinov
    - ko, courtesy of Changwoo Ryu
    - lt, courtesy of Aurimas Černius
    - lv, courtesy of Rūdolfs Mazurs
    - nb, courtesy of Kjartan Maraas
    - nl, courtesy of Nathan Follens
    - pt_BR, courtesy of Rafael Fontenelle
    - ro, courtesy of Daniel Șerbănescu
    - ru, courtesy of Stas Solovey
    - sl, courtesy of Matej Urbančič
    - sr, courtesy of Марко М. Костић
    - sv, courtesy of Anders Jonsson
    - tr, courtesy of Emin Tufan Çetin
    - vi, courtesy of Trần Ngọc Quân
    - zh_TW, courtesy of pan93412
  - Added/Updated Documentation
    - fr, courtesy of Charles Monzat

version 3.31.90
  - Remove app menu
    https://wiki.gnome.org/Initiatives/GnomeGoals/AppMenuRetirement
  - Replace git.gnome.org by Gitlab URL in <GitRepository> in DOAP file
  - Replace Bugzilla by Gitlab URL in DOAP file
  - Drop deprecated GtkScrollbar-min-slider-length
    It seems to serve no purpose anymore + added bonus:
    Avoid deprecation warning littering journald logs.
  - Added/Updated Translations
    - fr, courtesy of Charles Monzat
    - id, courtesy of Andika Triwidada
    - pl, courtesy of Piotr Drąg

version 3.30.0
  - cheese-window: Add camera toggle button
    Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=750285
  - Added/Updated Translations
    - en_GB, courtesy of Waldo Luís Ribeiro
    - et, courtesy of Mart Raudsepp
    - nl, courtesy of Nathan Follens
    - ro, courtesy of Daniel Șerbănescu
    - sl, courtesy of Matej Urbančič
    - zh_CN, courtesy of Jeff Bai
    - zh_TW, courtesy of Cheng-Chia Tseng
  - Added/Updated Documentation
    - ca, courtesy of Gerard Alcorlo Bofill
    - gl, courtesy of marcos

version 3.28.0
  - Add new device monitor methods to documentation
  - monitor: Implement GAsyncInitable interface
    Monitor initialization may block if external camera is connected,
    probably due to some kernel bug. It causes freezes for applications,
    which is not acceptable. Let's implement GAsyncInitable interface,
    so it can be initialized asynchronously.

    https://bugzilla.gnome.org/show_bug.cgi?id=782627
  - Remove the OMF file
    It’s a gnome-doc-utils/ScrollKeeper leftover.
  - help: Remove unused blurry images (screenshots?) that bloat the
    tarball
  - Added/Updated Translations
    - af, courtesy of Pieter Schalk Schoeman
    - ca@valencia, courtesy of Xavi Ivars
    - eo, courtesy of Anders JONSSON
    - et, courtesy of Mart Raudsepp
    - fa, courtesy of Arash Mousavi
    - hi, courtesy of G Karunakar
    - hr, courtesy of gogo
    - is, courtesy of Sveinn í Felli
    - ja, courtesy of Jiro Matsuzawa
    - ne, courtesy of Pawan Chitrakar
  - Added/Updated Documentation
    - el, courtesy of Efstathios Iosifidis
    - fr, courtesy of Charles Monzat
    - gl, courtesy of marcos
    - nl, courtesy of Justin van Steijn
    - pl, courtesy of Piotr Drąg

version 3.26.0
  - Added/Updated Translations
    - bg, courtesy of Alexander Shopov
    - da, courtesy of "Last-Translator: scootergrisen\n"
    - es, courtesy of Daniel Mustieles
    - gl, courtesy of Fran Dieguez
    - ko, courtesy of Changwoo Ryu
    - lo, courtesy of "Last-Translator: \n"
    - ml, courtesy of ബാലശങ്കർ സി
    - nl, courtesy of Hannie Dumoleyn
  - Added/Updated Documentation
    - ko, courtesy of Changwoo Ryu

version 3.25.90
  - Remove camera service
    It was an experiment, but in future PipeWire will be used instead, so it
    is no longer needed.
  - Remove some unused configuration variables
  - Correctly select the given camera device
    Due to a bug in the VAPI file the code would pass a string to the camera
    setup routine instead of a CameraDevice object. As the setup routine
    already has code to automatically select an appropriate device based on
    the name passing an argument is not even required.

    Note that the --device parameter might be somewhat confusing as it
    refers to the devices name and not to the /dev/videoX device file.

    https://bugzilla.gnome.org/show_bug.cgi?id=777047
  - Fix bug 773526
    Fix bug 773526 to use consisent language about the user's home folder.
    Fix <files> tag to be used around one folder and not multiple folders.
    Update last sentence to shorten and simplify it.
  - camera-device: limit width and height
    Set a limit on the width and height or else we might end scanning and
    overflowing forever.
  - camera-device: handle fraction ranges
    Add support for fraction ranges
  - camera: remove dead instance variables
    https://bugzilla.gnome.org/show_bug.cgi?id=780021
  - Added/Updated Translations
    - ne, courtesy of Pawan Chitrakar
    - pl, courtesy of Piotr Drąg
    - tr, courtesy of Emin Tufan Çetin
  - Added/Updated Documentation
    - cs, courtesy of Marek Černocký
    - de, courtesy of Christian Kirbach
    - es, courtesy of Daniel Mustieles
    - hu, courtesy of Gabor Kelemen
    - id, courtesy of Andika Triwidada
    - pl, courtesy of Piotr Drąg
    - pt_BR, courtesy of Rafael Fontenelle
    - sv, courtesy of Anders Jonsson

version 3.24.0
  - Fix build with new vala
  - camera: don't use hardcoded format
    Use gst_caps_fixate() to select the best format instead of trying to
    filter out a hardcoded format. Some cameras might not produce this
    format and thus fail to work.
  - Use Unicode in translatable strings
    See https://developer.gnome.org/hig/stable/typography.html

    https://bugzilla.gnome.org/show_bug.cgi?id=772263
  - Added/Updated Translations
    - be, courtesy of Yuras Shumovich
    - ca, courtesy of Gil Forcada
    - cs, courtesy of Marek Černocký
    - da, courtesy of scootergrisen
    - de, courtesy of Paul Seyfert
    - el, courtesy of Efstathios Iosifidis
    - es, courtesy of Daniel Mustieles
    - eu, courtesy of Iñaki Larrañaga Murgoitio
    - fi, courtesy of Jiri Grönroos
    - fr, courtesy of Charles Monzat
    - fur, courtesy of Fabio Tomat
    - gl, courtesy of Fran Dieguez
    - hr, courtesy of gogo
    - hu, courtesy of Gabor Kelemen
    - id, courtesy of Kukuh Syafaat
    - is, courtesy of Sveinn í Felli
    - it, courtesy of Milo Casagrande
    - kk, courtesy of Baurzhan Muftakhidinov
    - ko, courtesy of Changwoo Ryu
    - lt, courtesy of Moo
    - lv, courtesy of Rūdolfs Mazurs
    - nb, courtesy of Kjartan Maraas
    - oc, courtesy of Cédric Valmary (totenoc.eu)
    - pl, courtesy of Piotr Drąg
    - pt_BR, courtesy of Rafael Fontenelle
    - pt, courtesy of Tiago Santos
    - ru, courtesy of Yuri Myasoedov
    - sk, courtesy of Dušan Kazik
    - sl, courtesy of Matej Urbančič
    - sr, courtesy of Мирослав Николић
    - sr@latin, courtesy of Miroslav Nikolić
    - sv, courtesy of Anders Jonsson
    - uk, courtesy of Daniel Korostil
    - vi, courtesy of Trần Ngọc Quân
    - zh_TW, courtesy of Cheng-Chia Tseng

version 3.22.0
version 3.21.92
  - Add Language headers to po files
    Future versions of gettext will fail if this header is missing.
  - Added/Updated Translations
    - as, courtesy of Nilamdyuti Goswami
    - be@latin, courtesy of Ihar Hrachyshka
    - bn, courtesy of Sadia Afroz
    - ca@valencia, courtesy of Gil Forcada
    - dz, courtesy of Dawa pemo
    - en_GB, courtesy of David King
    - en@shaw, courtesy of Thomas Thurman
    - es, courtesy of Daniel Mustieles
    - gu, courtesy of "Last-Translator: \n"
    - he, courtesy of Yosef Or Boczko
    - hr, courtesy of "Last-Translator: \n"
    - ka, courtesy of Vladimer Sichinava
    - km, courtesy of Seng Sutha
    - ko, courtesy of Changwoo Ryu
    - ku, courtesy of Erdal Ronahi
    - ky, courtesy of Timur Zhamakeev
    - mai, courtesy of Sangeeta Kumari
    - mk, courtesy of "Last-Translator: Jovan N\n"
    - ms, courtesy of Umarzuki Bin Mochlis Moktar
    - nb, courtesy of Kjartan Maraas
    - nds, courtesy of Nils-Christoph Fiedler
    - nn, courtesy of Torstein Adolf Winterseth
    - pl, courtesy of Piotr Drąg
    - ps, courtesy of Zabeeh Khan
    - sl, courtesy of Matej Urbančič
    - sq, courtesy of Laurent Dhima
    - sr@latin, courtesy of Marko M. Kostić
    - ta, courtesy of Shantha kumar
    - ug, courtesy of Gheyret Kenji
    - zh_HK, courtesy of Chao-Hsiung Liao

version 3.21.3
  - Ensure autogen works in non-srcdir builds
    Only the configure script should be run from the build directory; the
    rest of the ancillary tools that modify the sources and generate the
    configure script itself need to be run inside the source directory.
  - Use AM_DISTCHECK_CONFIGURE_FLAGS
    DISTCHECK_CONFIGURE_FLAGS is for users and packagers to override
    distcheck options, while AM_DISTCHECK_CONFIGURE_FLAGS is for the
    maintainer of the software.

    https://www.gnu.org/software/automake/manual/automake.html#DISTCHECK_005fCONFIGURE_005fFLAGS
  - Explicitly mark the GSettings schema for intltool
    As recommended in the GSettings documentation.
  - Add gettext-domain the GSettings schema
  - Fix fallback application icon name
    https://bugzilla.gnome.org/show_bug.cgi?id=765874
  - fileutil: implement translation of Webcam folder
    In this commit I added the feature that folder containing captured
    photos and videos has a name that suits the locale is used by system.

    The problem is that folder to save captured pics and videos has strict
    name "Webcam".

    To fix this problem I used gettext method.

    https://bugzilla.gnome.org/show_bug.cgi?id=761958
  - Added/Updated Translations
    - bg, courtesy of Alexander Shopov
    - fa, courtesy of Arash Mousavi
    - fur, courtesy of Fabio Tomat
    - id, courtesy of Andika Triwidada
    - oc, courtesy of Cédric Valmary (totenoc.eu)
    - pt_BR, courtesy of Enrico Nicoletto
    - ro, courtesy of Jobava
    - th, courtesy of Akom Chotiphantawanon
    - uk, courtesy of Daniel Korostil
    - vi, courtesy of Trần Ngọc Quân
  - Added/Updated Documentation
    - pt_BR, courtesy of Enrico Nicoletto

version 3.20.0
  - Added/Updated Translations
    - cs, courtesy of Marek Černocký
    - da, courtesy of "Last-Translator: scootergrisen\n"
    - el, courtesy of Efstathios Iosifidis
    - es, courtesy of Daniel Mustieles
    - eu, courtesy of dooteo
    - fi, courtesy of Jiri Grönroos
    - fr, courtesy of Alain Lojewski
    - fur, courtesy of Fabio Tomat
    - gl, courtesy of Fran Dieguez
    - it, courtesy of Milo Casagrande
    - ja, courtesy of Tsuji Kento
    - kk, courtesy of Baurzhan Muftakhidinov
    - ko, courtesy of Changwoo Ryu
    - lt, courtesy of Aurimas Černius
    - lv, courtesy of Rūdolfs Mazurs
    - nb, courtesy of Kjartan Maraas
    - nl, courtesy of Hannie Dumoleyn
    - oc, courtesy of Cédric Valmary (totenoc.eu)
    - pt, courtesy of Sérgio Cardeira
    - ru, courtesy of Stas Solovey
    - sl, courtesy of Matej Urbančič
    - sr, courtesy of Марко М. Костић
    - sr@latin, courtesy of Marko M. Kostić
    - tr, courtesy of Muhammet Kara
    - zh_CN, courtesy of Dingzhong Chen
  - Added/Updated Documentation
    - ko, courtesy of Youngbin Han

version 3.19.90
  - Use same alias as upstream for XDG directories
    https://bugzilla.gnome.org/show_bug.cgi?id=761952
  - Rename icon to match application namespace
    This is required in preparation for xdg-app.

    https://bugzilla.gnome.org/show_bug.cgi?id=761197
  - Drop udev dependency
    All that udev was used for is now covered by GstDeviceMonitor.
  - Add a missing tag to the AppData file
  - Update the AppData to spec version 0.7+
  - build-sys: Annotate we don't support srcdir != builddir from git
    Due to vala.
  - Fix resizing and scaling of video preview
    Allow the preview to expand, and set a reasonable minimum height and
    width.
  - Set a minimum effect actor size
    This allows the effects previews to expand with the size of the window.
  - Replace some stray references to ClutterTexture
    Fix rendering into effects previews, although the size of the previews
    is still incorrect.

    https://bugzilla.gnome.org/show_bug.cgi?id=755084
  - Fix German desktop file translation
  - Added/Updated Translations
    - an, courtesy of Daniel
    - ar, courtesy of Khaled Hosny
    - de, courtesy of Mario Blättermann
    - eo, courtesy of Kristjan SCHMIDT
    - es, courtesy of Daniel Mustieles
    - eu, courtesy of Inaki Larranaga Murgoitio
    - fi, courtesy of Jiri Grönroos
    - fur, courtesy of Fabio Tomat
    - he, courtesy of Yosef Or Boczko
    - hu, courtesy of Meskó Balázs
    - it, courtesy of Milo Casagrande
    - ja, courtesy of Jiro Matsuzawa
    - ko, courtesy of Changwoo Ryu
    - lt, courtesy of Aurimas Černius
    - pl, courtesy of Piotr Drąg
    - pt_BR, courtesy of Rafael Fontenelle
    - sk, courtesy of Dušan Kazik
    - sl, courtesy of Matej Urbančič
    - sv, courtesy of Anders Jonsson
    - th, courtesy of Akom Chotiphantawanon
    - uk, courtesy of Daniel Korostil
    - vi, courtesy of Trần Ngọc Quân
    - zh_CN, courtesy of Dean Chen
  - Added/Updated Documentation
    - es, courtesy of Daniel Mustieles
    - ko, courtesy of Youngbin Han
    - nl, courtesy of Hannie Dumoleyn
    - sv, courtesy of Sebastian Rasmussen

version 3.18.0
  - Mark forgotten strings for translation
    Not a string freeze break.
  - Added/Updated Translations
    - cs, courtesy of Marek Černocký
    - da, courtesy of Kenneth Nielsen
    - de, courtesy of Bernd Homuth
    - el, courtesy of Tom Tryfonidis
    - fr, courtesy of Alain Lojewski
    - gl, courtesy of Fran Dieguez
    - hu, courtesy of Balázs Úr
    - id, courtesy of Andika Triwidada
    - kk, courtesy of Baurzhan Muftakhidinov
    - lt, courtesy of Aurimas Černius
    - lv, courtesy of Rūdolfs Mazurs
    - nb, courtesy of Kjartan Maraas
    - pl, courtesy of Piotr Drąg
    - pt_BR, courtesy of Enrico Nicoletto
    - pt, courtesy of Pedro Albuquerque
    - ru, courtesy of Stas Solovey
    - sk, courtesy of Dušan Kazik
    - sr, courtesy of Милош Поповић
    - sr@latin, courtesy of Miloš Popović
    - sv, courtesy of Anders Jonsson
    - tr, courtesy of Muhammet Kara
    - zh_TW, courtesy of Cheng-Chia Tseng

version 3.17.92
  - Maintain aspect ratio when resizing preview window

    Set content-gravity on the preview actor to
    CLUTTER_CONTENT_GRAVITY_RESIZE_ASPECT.

    https://bugzilla.gnome.org/show_bug.cgi?id=754988
  - libcheese: Fix a run-time warning

    https://bugzilla.gnome.org/show_bug.cgi?id=754556
  - libcheese: Fix warning on exit

    https://bugzilla.gnome.org/show_bug.cgi?id=754556
  - Support a default CheeseCamera device

    Accept a name, stash it inside the camera and then search through all
    the devices present on the system when setting up the camera. If a match
    is found, use it, otherwise continue to setup the first device.
  - Avoid crash when creating the default CheeseWidget

    Update the device argument to cheese_camera_new() to reflect the new use
    of GstDeviceMonitor, by renaming the device_node argument to name. Emit
    a critical warning if passing a name, as creating a device by name is
    not yet supported.

    https://bugzilla.gnome.org/show_bug.cgi?id=754506
  - Added/Updated Translations
    - cs, courtesy of Marek Černocký
    - de, courtesy of Bernd Homuth
    - el, courtesy of Tom Tryfonidis
    - fa, courtesy of Arash Mousavi
    - fi, courtesy of Jiri Grönroos
    - fr, courtesy of Alain Lojewski
    - gl, courtesy of Fran Dieguez
    - id, courtesy of Andika Triwidada
    - is, courtesy of Sveinn í Felli
    - it, courtesy of Milo Casagrande
    - ja, courtesy of Tsuji Kento
    - kk, courtesy of Baurzhan Muftakhidinov
    - ko, courtesy of Changwoo Ryu
    - lt, courtesy of Aurimas Černius
    - nb, courtesy of Kjartan Maraas
    - tr, courtesy of Muhammet Kara

version 3.17.91
  - Add GenericName to desktop file
    https://bugzilla.gnome.org/show_bug.cgi?id=754255
  - Added/Updated Translations
    - es, courtesy of Daniel Mustieles
    - he, courtesy of Yosef Or Boczko
    - hu, courtesy of Balázs Úr
    - pl, courtesy of Piotr Drąg
    - pt, courtesy of Pedro Albuquerque
    - sk, courtesy of Dušan Kazik
    - sv, courtesy of Anders Jonsson
    - zh_TW, courtesy of Cheng-Chia Tseng

version 3.17.90
  - Bump the SONAME as the ABI has changed for the clutter-gst-3.0 change
    and GstDeviceMonitor port.
  - libcheese: port to clutter-gst 3.0
    https://bugzilla.gnome.org/show_bug.cgi?id=743496
  - Fix documentation tests after GstDeviceMonitor
  - device-monitor: port to GstDeviceMonitor
    Use GstDeviceMonitor to monitor the GStreamer devices.
  - camera: avoid confusing error message
    Report about the name of the missing element instead of some other
    unrelated string.
  - Added/Updated Translations
    - oc, courtesy of Yannig MARCHEGAY (Kokoyaya)
    - pt, courtesy of Tiago S.
    - tg, courtesy of Victor Ibragimov

version 3.17.1
  - Silence a gtk-doc undeclared symbol warning
    Split the typedef of CheeseVideoFormat out, so that gtk-doc does not
    report an undeclared symbol.
  - Use G_DECLARE_FINAL_TYPE where possible
  - icon: install symbolic to symbolic size
    rather than installing to scalable size, we install
    to symbolic due to the nominal size of 16x16
  - Provide a symbolic variant of the application icon
    Used for the High Contrast theme.
    The symbolic size has been introduced to hicolor to cope with
    the nominal size of 16x16 rather than the backward compatible
    128x128.
    https://bugzilla.gnome.org/show_bug.cgi?id=747013

version 3.16.0
  - Added/Updated Translations
    - vi, courtesy of Trần Ngọc Quân

version 3.15.92
  - Added/Updated Translations
    - bs, courtesy of Samir Ribic
    - kk, courtesy of Baurzhan Muftakhidinov
  - Added/Updated Documentation
    - de, courtesy of Christian Kirbach

version 3.15.90
  - Avoid warnings from -Wswitch-enum
    Check switch statements where several cases are intentionally not
    handled by using an if instead.
  - Avoid a preprocessor warning
  - Fix const cast warnings
  - Fix signedness comparison error
  - Fix shadowed variable
  - Remove old-style function definitions
  - Fix signed comparison warning in camera service
  - Update gtkdoc_jh_path_xml_catalog.m4 from gtk-doc
  - Remove use of GSEAL_ENABLE
    It is no longer useful with GTK+ 3, where every widget has been sealed.
  - Remove use of GNOME_MAINTAINER_MODE_DEFINES
    https://wiki.gnome.org/Projects/GnomeCommon/Migration
  - Drop use of gnome-autogen.sh
    https://wiki.gnome.org/Projects/GnomeCommon/Migration
  - preferences: resolve ambiguous 'ListStore' usage
    There is now a GLib.ListStore as well, so make sure we use the full name
    Gtk.ListStore to avoid an ambiguous reference.
  - Added/Updated Translations
    - an, courtesy of Daniel Martinez

version 3.15.4
  - Ignore intermediate file with Automake 1.15
  - Removed obsolete variables in autogen.sh
  - um-crop-area: Fix deprecated API usage
    https://bugzilla.gnome.org/show_bug.cgi?id=742530
  - um-crop-area: Enforce a minimum size
    Otherwise, if callers aren't careful, users could resize us so small
    that we'd crash inside gdk_pixbuf_scale() .
    https://bugzilla.gnome.org/show_bug.cgi?id=742530
  - um-crop-area: Fix background rendering around the picture
    Instead of trying to fill the displayed pixbuf with the background
    color (and failing at that), just make the pixbuf be an aspect correct
    scaled size of the original picture and draw it at the correct offset
    on the draw vfunc.
    This allows us to get rid of deprecated gtk+ API usage and fixes the
    background around the picture ending up black despite de code's
    intent.
    https://bugzilla.gnome.org/show_bug.cgi?id=742530

version 3.15.3
  - Refactor crop area scaling code
    Recently committed patch f9d576e was modified before applying it into
    the g-c-c to be more readable. This patch reflect those changes in cheese.
    https://bugzilla.gnome.org/show_bug.cgi?id=739870
  - Added/Updated Translations
    - cs, courtesy of Marek Černocký
    - tr, courtesy of Muhammet Kara
    - vi, courtesy of Trần Ngọc Quân

version 3.15.2
  - Fix Nepali desktop file keywords translation
  - Add name and summary elements to AppData
    Pacify appstream-util validate.
  - Limit default size for avatar cropping
    Commit c605ad3578ff66452bd7b01d257f31c64e7905ef enlarged default size
    for cropping avatars thus crop rectangle could be easily bigger then
    image. The crop rectagle can't be modified and cc_crop_area_get_picture
    causes errors if the rectangle is bigger, because it has negative
    coordinates. Limit the default size to fit the image also.
    https://bugzilla.gnome.org/show_bug.cgi?id=739870
  - Added/Updated Translations
    - fi, courtesy of Jiri Grönroos
    - ne, courtesy of Pawan Chitrakar

version 3.15.1
  - Substitute bindir and libexecdir in Makefile.am
    Rather than substituting the values of libexecdir and bindir during
    configure, which might include some unexpanded shell variables, expand
    and substitute them as targets in Makefile.am instead.

    https://bugzilla.gnome.org/show_bug.cgi?id=726095
  - Use AC_PROG_SED in configure.ac
  - Remove old marshaller header from doc ignore list
  - Use get_instance_private() instead of priv pointer
    Use the generated macro rather than storing a pointer to the private
    struct within the object.
  - Drop some trailing semicolons after macros
  - Use new-style private struct in CheeseCameraDevice
  - Use _get_instance_private() consistently in camera
    Use the new cheese_camera_get_instance_private() instead of the old
    macro.
  - Bump required Vala version for get_menu_by_id()
    Use the get the given menu from GtkApplication.
  - Refactor setup_camera() in CheeseWidget
    Remove superfluous prototype. Use GSettings convenience getters. Reduce
    scope of some variables.
  - Avoid using G_GNUC_CONST on _get_type()
    As the g_type_ensure() documentation notes, it is incorrect to mark a
    _get_type() method with G_GNUC_CONST, as it as a side effect the first
    time it is called.
  - Use LT_LIB_M to find the math library
    libcheese-gtk needs to link with -lm to find the fmod function.
  - Avoid dereferencing an uninitialized variable
    Found with Coverity (CID 56653).
  - Post-release version bump to 3.15.1
  - Added/Updated Translations
    - fa, courtesy of Arash Mousavi
    - it, courtesy of Milo Casagrande
    - te, courtesy of Krishnababu Krothapalli
  - Added/Updated Documentation

version 3.14.0
  - Add gstreamer-plugins-bad-1.0 to GStreamer check
    It is needed for the camerabin2 header.
  - Post-release version bump to 3.14.0
  - Added/Updated Translations
    - da, courtesy of Kenneth Nielsen
    - hi, courtesy of rajesh
    - ja, courtesy of Hajime Taira
    - mr, courtesy of Sandeep Shedmake
    - pa, courtesy of A S Alam
    - sr, courtesy of Мирослав Николић
    - sr@latin, courtesy of Miroslav Nikolić
    - uk, courtesy of Daniel Korostil
    - zh_CN, courtesy of Tong Hui

version 3.13.92
  - Remove outdated GTK+ version check
  - Use APPSTREAM_XML instead of APPDATA_XML
  - Remove outdated intltool build rules
    The intltool-* scripts are not included in the distribution any longer.
  - Update .pc file Requires and Requires.private
  - Remove some unnecessary pkg-config dependencies
  - Fix crash when animating countdown
    https://bugzilla.gnome.org/show_bug.cgi?id=735285
  - Post-release version bump to 3.13.91
  - Added/Updated Translations
    - bn_IN
    - de, courtesy of Wolfgang Stoeggl
    - el, courtesy of Tom Tryfonidis
    - fi, courtesy of Jiri Grönroos
    - fr, courtesy of Alain Lojewski
    - gu
    - kn
    - ko, courtesy of Changwoo Ryu
    - lv, courtesy of Rūdolfs Mazurs
    - or, courtesy of Manoj Kumar Giri
    - pl, courtesy of Piotr Drąg
    - ru, courtesy of Yuri Myasoedov
    - sk, courtesy of Dušan Kazik
    - sl, courtesy of Matej Urbančič
    - sl, courtesy of Shantha Kumar

version 3.13.90.1
  - Explicitly link gnome-camera-service to libraries
    https://bugzilla.gnome.org/show_bug.cgi?id=735040
  - Fix libcheese header include in camera service
    https://bugzilla.gnome.org/show_bug.cgi?id=735017
  - Post-release version bump to 3.13.91
  - Added/Updated Translations
  - Added/Updated Documentation

version 3.13.90
  - Add simple service client example
  - Import basic camera D-Bus service
  - Use new metadata_license in AppData description
  - Use config.h instead of cheese-config.h
    Use a standard filename for the genereated configuration header.
  - Use GtkIconTheme built-in RTL support
  - Move thumbview popup menu to GtkBuilder file
  - Refactor thumb view popup menu handling
    Popup the thumb view context menu in response to the popup-menu signal
    on GtkWidget.

    https://bugzilla.gnome.org/show_bug.cgi?id=724905
  - Optionally use a header bar in the preferences
    Make the preferences dialog pay attention to the gtk-dialogs-use-header
    GtkSetting.
  - doap category apps
  - Fix button alignment in main window
  - Avoid using deprecated GtkAlignment in main window
  - Avoid xalign property in preferences dialog
    Use halign on GtkWidget instead.
  - Avoid deprecated margin-left GtkWidget property
    Use margin-start instead.
  - Avoid GtkCellArea critical warnings in thumb view
    GTK+ switched from using constructor() to constructed() in GtkIconView,
    which exposed that Cheese does not chain up in the CheeseThumbView (a
    GtkIconView subclass) constructed() vfunc. Chain up at the start of
    constructed() so that the construct-only properties of the GtkIconView
    are set before calling icon view API.
  - Avoid using deprecated GtkAlignment
  - Post-release version bump to 3.13.90
  - Added/Updated Translations
    - as, courtesy of Nilamdyuti Goswami
    - ca, courtesy of Gil Forcada
    - ca@valencia, courtesy of Gil Forcada
    - eu, courtesy of Iñaki Larrañaga Murgoitio
    - lt, courtesy of Aurimas Černius
    - sv, courtesy of Anders Jonsson
  - Added/Updated Documentation
    - hu, courtesy of Balázs Úr

version 3.13.4
  - Track flash opacity explicitly
    Retrieving the opacity of the flash, reducing it by an exponentially
    small step, and setting it again does not always actually decrease the
    widget's opacity, and so the fading does not actually terminate.

    Incidentally, also unset the flash timeout tags to avoid calling
    g_source_remove() spuriously.

    https://bugzilla.gnome.org/show_bug.cgi?id=733433
  - Use a better fallback image location
    https://bugzilla.gnome.org/show_bug.cgi?id=731032
  - Use new GtkApplication appmenu resource handling
  - Match desktop file name in AppData
    Update the AppData reference to the desktop file, as it was not changed
    when the desktop file was renamed.
  - Avoid crash during delete-event in chooser test
  - Added/Updated Translations
    - ca@valencia, courtesy of Pau Iranzo
    - es, courtesy of Daniel Mustieles
    - gl, courtesy of Fran Dieguez
    - he, courtesy of Yosef Or Boczko
    - hu, courtesy of Balázs Úr
    - id, courtesy of Andika Triwidada
    - nb, courtesy of Kjartan Maraas
    - pt_BR, courtesy of Enrico Nicoletto
    - zh_TW, courtesy of Cheng-Chia Tseng
  - Added/Updated Documentation
    - fi, courtesy of Sami Jaktholm

version 3.13.1
  - Updated POTFILES.in
  - Use a traditional title bar when requested
    Not all environments desire header bars. We use the
    'gtk-shell-shows-menubar' setting to decide whether to use the header
    bar.
    https://bugzilla.gnome.org/show_bug.cgi?id=728866
  - Use avatar chooser headerbar only when requested
    Use headerbar in the avatar chooser dialog only when necessary according
    to the "gtk-shell-shows-menubar" setting.
    https://bugzilla.gnome.org/show_bug.cgi?id=728866
  - Rename desktop file and set DBusActivatable=true
    Rename AppData and GResource XML in line with desktop file changes.
  - Add D-Bus service file
    Allow the application to be D-Bus activated by running with the
    --gapplication-service argument.
  - Remove old maintainers from DOAP file
  - Stop the running action when an error occurs
    https://bugzilla.gnome.org/show_bug.cgi?id=707386
  - Inhibit user switching and session idle
    As recording video from a webcam is undesirable when combined with
    switching users, inhibit switching and session idling.
    https://bugzilla.gnome.org/show_bug.cgi?id=694214
  - Depend on Automake 1.12 for test-driver support
    https://bugzilla.gnome.org/show_bug.cgi?id=710420
  - Fix untranslated strings in libcheese
    https://bugzilla.gnome.org/show_bug.cgi?id=727082
  - Use suggested-action style for Select button
  - Remove the border from the chooser action area
  - Use headerbar in the avatar chooser dialog
    Bump GTK+ requirement for the new GtkDialog property.
    https://bugzilla.gnome.org/show_bug.cgi?id=727076
  - Post-release version bump to 3.13.1
  - Added/Updated Translations
    - cs, courtesy of Marek Černocký
    - el, courtesy of Tom Tryfonidis
    - nl, courtesy of Erwin Poeze
    - sl, courtesy of Matej Urbančič
    - th, courtesy of Akom Chotiphantawanon
  - Added/Updated Documentation
    - el, courtesy of Tom Tryfonidis
    - id, courtesy of Andika Triwidada

version 3.12.0
  - Post-release version bump to 3.12.0
  - Added/Updated Translations
    - da, courtesy of Kenneth Nielsen
    - eu, courtesy of Iñaki Larrañaga Murgoitio
    - it, courtesy of Giuseppe Pignataro

version 3.11.92
  - Use new GApplicationCommandline handling
    Additionally, avoid a non-literal format warning.
    https://bugzilla.gnome.org/show_bug.cgi?id=725994
  - Post-release version bump to 3.11.92
  - Added/Updated Translations
    - ca, courtesy of Pau Iranzo
    - fi, courtesy of Jiri Grönroos
    - ko, courtesy of Changwoo Ryu
    - lv, courtesy of Rūdolfs Mazurs
    - pa, courtesy of A S Alam
    - pl, courtesy of Paweł Żołnowski
    - pt, courtesy of Tiago S.
    - ru, courtesy of Yuri Myasoedov
    - sr, courtesy of Мирослав Николић
    - sr@latin, courtesy of Miroslav Nikolić
  - Added/Updated Documentation
    - es, courtesy of Daniel Mustieles
    - fr, courtesy of naybnet

version 3.11.91
  - Work around non-existent Makefile during clean
  - Mark help images as untranslatable
    Delete translations of images that don't need them and of images that
    aren't used any more.
  - Review index and pref help for 3.12
  - Update intro and features help for 3.12
  - Post-release version bump to 3.11.91
  - Added/Updated Translations
    - be, courtesy of Yuri Matsuk
    - cs, courtesy of Marek Černocký
    - fr, courtesy of Alain Lojewski
    - hu, courtesy of Gabor Kelemen
  - Added/Updated Documentation
    - cs, courtesy of Marek Černocký
    - es, courtesy of Daniel Mustieles
    - hu, courtesy of Gabor Kelemen

version 3.11.90
  - Remove g_type_init() from test-libcheese.c
  - Update copyright in about dialogue
  - Fix find usage on FreeBSD and POSIX, bug 724091
    POSIX find requires a path as an argument.
  - Post-release version bump to 3.11.90
  - Added/Updated Translations
    - de, courtesy of Benjamin Steinwender
    - uk, courtesy of Daniel Korostil
  - Added/Updated Documentation
    - de, courtesy of Jonatan Zeidler

version 3.11.5
  - Apply style classes to some main window buttons
    https://wiki.gnome.org/HowDoI/Buttons
  - Fix the page navigation icons in RTL
    https://bugzilla.gnome.org/show_bug.cgi?id=723569
  - Replace deprecated use of ClutterTableLayout
    Use ClutterGridLayout instead.
  - Replace deprecated gtk_window_*_opacity()
    Use gtk_widget_*_opacity() instead.
  - Disable C warnings for Vala code, bug 710218
    They generally cannot be resolved in Vala and make the build confusing.
  - Add programming languages to DOAP file
  - Clean up Cheese Effects screenshot and decrease filesize (bug 700352)
  - Update FSF Address
    https://bugzilla.gnome.org/show_bug.cgi?id=721536
  - Update project homepage

  - Post-release version bump to 3.11.4
  - Added/Updated Translations
    - as, courtesy of Nilamdyuti Goswami
    - cs, courtesy of Marek Černocký
    - he, courtesy of Yosef Or Boczko
    - id, courtesy of Andika Triwidada
    - kn, courtesy of Daniel Mustieles
    - lt, courtesy of Aurimas Černius
    - nb, courtesy of Kjartan Maraas
    - sk, courtesy of Pavol Klačanský
    - tg, courtesy of Victor Ibragimov
    - zh_CN, courtesy of Tong Hui
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao
  - Added/Updated Documentation
    - cs, courtesy of Marek Černocký
    - el, courtesy of Dimitris Spingos (Δημήτρης Σπίγγος)
    - es, courtesy of Daniel Mustieles

version 3.11.3
  - Validate AppData XML during distcheck

    Force validation of AppData XML during distcheck, if a recent enough
    version of appdata-tools is available.
  - Fix an empty last page in the effects selector

    If there were exactly the same number of effects available as were shown
    in the effects selector, an empty last page was shown. Fix a condition
    to test that there are more spaces for effects in the selector than
    there are available effects. Fixes bug 720178.
  - Refactor effects page next/previous logic

    Add is_next_effects_page() and is_previous_effects_page() to
    CheeseWindow.
  - Post-release version bump to 3.11.3
  - Added/Updated Translations
    - eo, courtesy of Ryan Lortie
    - gl, courtesy of Fran Dieguez
    - pt_BR, courtesy of Fábio Nogueira
    - ta, courtesy of Shantha kumar
    - th, courtesy of Akom Chotiphantawanon

version 3.11.2
  - Show top bar when moving mouse in fullscreen mode

    Store whether the window was maximized before entering fullscreeen mode,
    and return to the same state when exiting fullscreen.

    https://wiki.gnome.org/Design/Apps/Cheese#Full_Screen

    https://bugzilla.gnome.org/show_bug.cgi?id=711811
  - Use new G_DEFINE_TYPE_WITH_PRIVATE macro
  - Remove obsolete enum type files
  - Fix memory leak in cheese_thumb_view_remove_item()
  - Add a finalize method to CheeseEffect

    The data in CheeseEffectPrivate was not being freed, leading to memory
    leaks.
  - Fix memory leak in cheese_thumb_view_monitor_cb()
  - Remove obsolete CheeseCameraEffect from VAPI
  - Fix cheese_camera_get_video_formats() in VAPI
  - CheeseCamera VAPI fixes
  - Fix memory leak in cheese_camera_set_tags()
  - Mark CheeseVideoFormat as a boxed type in the VAPI

    It was only marked as a compact struct, and so was never freed.
  - Mark CheeseFileutil strings as owned

    The strings were marked as unowned, which meant that the Vala compiler
    did not emit free functions and the strings were leaked.
  - Fix leaks in cheese_camera_set_video_recording()
  - Fix leak of GtkSizeGroup in CheeseAvatarWidget
  - Chain up to finalize in UmCropArea
  - Add AppData description
  - Fixed deprecated warning in on_countdown_toggle

    https://bugzilla.gnome.org/show_bug.cgi?id=712151
  - Preprocess thumbnail frame PNG in GResource

    Also, add SVG images which were forgotten in the last commit.
  - Move PNG and SVG images into GResource
  - Add domain attribute to GtkBuilder interfaces
  - Move application menu into GtkBuilder resource
  - Make CheeseMainWindow a template widget
  - Make CheesePreferencesDialog a template widget
  - Move ClutterScript JSON into GResource
  - Use GResource for CSS snippet
  - Refactor GtkScale code in CheesePreferences
    Move mark definitions into GtkBuilder. Convert GtkHScale to GtkScale

    with a horizontal orientation. Use g_settings_bind() to link GSettings
    values to UI elements, and remove unnecessary signal handlers.
  - Fix leak in CheeseCameraDeviceMonitor test
  - Fixed unused-but-set warning in EogThumbNav

    https://bugzilla.gnome.org/show_bug.cgi?id=711841
  - Link the effect browsing buttons together
  - Make all buttons have GTK_RELIEF_NORMAL
  - Change header bar when choosing effects

    https://wiki.gnome.org/GnomeGoals/HeaderBars

    https://bugzilla.gnome.org/show_bug.cgi?id=711714
  - Remove unused CheeseWindow.set_mode ()
  - Change titlebar to use GtkHeaderBar

    https://wiki.gnome.org/GnomeGoals/HeaderBars

    https://bugzilla.gnome.org/show_bug.cgi?id=711714
  - Remove unused countdown_action
  - Add a border around the button area box
  - Convert some GtkGrid widgets to GtkBox
  - Remove mode and shoot actions from the app menu

    The current GNOME HIG suggests that actions which are already accessible
    from the application window should not be duplicated in the application
    menu:

    https://wiki.gnome.org/Design/HIG/ApplicationMenus
  - Use symbolic icon for leave fullscreen button
  - Make shoot action button wider
  - Link mode buttons together
  - Avoid using GtkStock, as it is deprecated

    https://bugzilla.gnome.org/show_bug.cgi?id=710217
  - Centered the capture icon

    https://bugzilla.gnome.org/show_bug.cgi?id=711680
  - Change stock icons to symbolic icons

    https://bugzilla.gnome.org/show_bug.cgi?id=711680
  - Use symbolic icons for photo and video button

    Using the stock "record" icon for taking photos is misleading, so use a
    symbolic "webcam" icon for both taking a photo and recording a video.
    Update the "stop" icon to also be a symbolic icon.

    https://bugzilla.gnome.org/show_bug.cgi?id=668599
  - Depend on GTK+ 3.10.0 for GtkHeaderBar
  - Fix memory leak in cheese_camera_device_get_caps()
  - Fix cheese_thumb_view_append_item() memory leaks

    Fix several memory leaks found with valgrind.
  - Fix memory leak when creating a new CheeseCamera
  - Fix some memory leaks in cheese_fileutil_init()
  - Make static string array const
  - Simplify looping over GStrv
  - Make cheese_camera_device_monitor_set_up_device static
  - Revert "Use ClutterGst 3.0"

    This reverts commit 5061d1cdaf7ad9eb733047455b5b5d7a4551eb93. The
    jhbuild 3.12 moduleset is using the clutter-gst-2.0 branch.
  - libcheese: Export cheese_avatar_widget_new
  - libcheese: Distribute cheese-avatar-widget.h

    So external consumers can use it.
  - Use ClutterGst 3.0
  - Post-release version bump to 3.11.2
  - Added/Updated Translations
    - el, courtesy of Dimitris Spingos (Δημήτρης Σπίγγος)
    - es, courtesy of Daniel Mustieles
    - gl, courtesy of Fran Dieguez
    - ml, courtesy of Anish Sheela
    - sl, courtesy of Matej Urbančič
    - ta, courtesy of Shantha kumar
    - th, courtesy of Akom Chotiphantawanon
  - Added/Updated Documentation

version 3.11.1
  - Add CheeseAvatarWidget to API reference
  - Fix CheeseAvatarChooser test

    There is no longer a button with the label "Take a Photo", so remove the
    test which tries to find it.
  - Distribute cheese-avatar-widget.h
  - Add CheeseAvatarWidget
    A stand-alone widget for avatar capture, like the avatar chooser but
    without the precanned dialogue.

    https://bugzilla.gnome.org/show_bug.cgi?id=710874
  - Set a reasonable default size for avatar cropping
    The default is based on the minimum 48x48 size. Instead we should be
    cropping to nearly the maximum size of the image, which would still show
    the crop handles but would not discard most of the captured image.

    https://bugzilla.gnome.org/show_bug.cgi?id=710874
  - Add margins to CheeseAvatarChooser
    https://bugzilla.gnome.org/show_bug.cgi?id=710874
  - Rename the CheeseAvatarChooser buttons
    As per mockups:
    https://raw.github.com/gnome-design-team/gnome-mockups/master/avatar-chooser/avatar-chooser.png

    https://bugzilla.gnome.org/show_bug.cgi?id=710874
  - Style the CheeseAvatarChooser button bar
    Style the button bar underneath the video widget properly.

    As per mockups:
    https://raw.github.com/gnome-design-team/gnome-mockups/master/avatar-chooser/avatar-chooser.png

    https://bugzilla.gnome.org/show_bug.cgi?id=710874
  - Set a nice default size on CheeseWidget
    As per mockups:

    https://raw.github.com/gnome-design-team/gnome-mockups/master/avatar-chooser/avatar-chooser.png

    https://bugzilla.gnome.org/show_bug.cgi?id=710874
  - Avoid warnings with no pixbuf in UmCropArea
    https://bugzilla.gnome.org/show_bug.cgi?id=710874
  - Use a layout manager instead of constraints
    This reduces property changes for every little change in the stage's
    properties.

    https://bugzilla.gnome.org/show_bug.cgi?id=710821
  - Update TotemAspectFrame from totem
    https://bugzilla.gnome.org/show_bug.cgi?id=710821
  - Remove gdk_threads* calls
    And bump the GDK and GTK+ required version to 3.6.

    https://bugzilla.gnome.org/show_bug.cgi?id=710821
  - Adapt to Automake test-driver changes
    Distribute test-driver script and do not use cd in TESTS_ENVIRONMENT.
  - Post-release version bump to 3.11.1
  - Added/Updated Translations
    - ca@valencia, courtesy of Josep Sànchez
    - fa, courtesy of Arash Mousavi
    - pt, courtesy of António Lima
  - Added/Updated Documentation
    - fr, courtesy of Mickael Albertus

version 3.10.0
  - Post-release version bump to 3.10.0
  - Added/Updated Translations
    - ca, courtesy of Josep Sànchez
    - et, courtesy of Mattias Põldaru
    - eu, courtesy of Iñaki Larrañaga Murgoitio
    - ja, courtesy of Jiro Matsuzawa
    - pa, courtesy of A S Alam
    - uk, courtesy of Daniel Korostil

version 3.9.92
  - Close the preferences if the action is disabled
    When shooting, the preferences action is disabled. If the preferences
    dialog is shown, the resolution and capture device can still be changed,
    so hide the dialog when the preferences action is disabled.
  - Disable the preferences action while shooting
    Changing the resolution or camera device while recording can lead to a
    crash, so avoid the problem by disabling the preferences action whenever
    the mode change actions are disabled. Fixes bug 670782.
  - Fix video recording with GStreamer >= 1.1.4
    GStreamer >= 1.1.4 requires fully specifying the video-capture-source
    caps,
    otherwise Cheese prints this:

(cheese:22606): cheese-WARNING **: Filter caps do not completely specify
    the output format: gstcapsfilter.c(348): gst_capsfilter_prepare_buf ():
/GstCameraBin:camerabin/GstCapsFilter:videobin-capsfilter:
    Output caps are unfixed: video/x-raw, framerate=(fraction)30/1,
    width=(int)640, height=(int)480, format=(string){ YUY2,
    YV12, BGR, RGB, I420 }, pixel-aspect-ratio=(fraction)1/1,
    interlace-mode=(string)progressive

    and video-recording is broken. Fixes bug 707391.

  - Skip loading effects with missing plugins
    If effects modules are missing, do not load them into EffectsManager to
    skip showing them in the UI. Fixes bug 702995.
  - Fix categories in .desktop file, bug 707373
    gnome-software uses the desktop file categories to sort the applications
    it shows. This commit fixes the categories according to the freedesktop
    spec, so that Cheese will appear in the correct category.

    For more information:
    http://standards.freedesktop.org/menu-spec/latest/apa.html
    http://standards.freedesktop.org/menu-spec/latest/apas02.html
  - Drop wrong license lines from Galician translations for docs
  - Post-release version bump to 3.9.92
  - Added/Updated Translations
    - as, courtesy of Nilamdyuti Goswami
    - be, courtesy of Yuri Matsuk
    - da, courtesy of Ask Hjorth Larsen
    - fi, courtesy of Jiri Grönroos
    - fr, courtesy of Alain Lojewski
    - ga, courtesy of Seán de Búrca
    - hu, courtesy of Balázs Úr
    - id, courtesy of Andika Triwidada
    - it, courtesy of Milo Casagrande
    - ko, courtesy of Changwoo Ryu
    - lt, courtesy of Aurimas Černius
    - lv, courtesy of Rūdolfs Mazurs
    - pl, courtesy of Piotr Drąg
    - ru, courtesy of Yuri Myasoedov
    - sr, courtesy of Мирослав Николић
    - sr@latin, courtesy of Miroslav Nikolić
  - Added/Updated Documentation
    - es, courtesy of Daniel Mustieles
    - gl, courtesy of Fran Dieguez
    - hu, courtesy of Gabor Kelemen
    - id, courtesy of Andika Triwidada

version 3.9.91
  - Do not override errors in camera_state_change_null
    If a more detailed error has already been set (through a GError return
    from libcheese), do not override it when changing state to null.

    Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  - Fix memory leak when freeing video formats
    Free the GList, as well as the video formats in the list.

    Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  - Improve cheese_camera_device_get_best_format()
    If a camera device which can do 1600x900 at 10 FPS and 1280x800 @ 25
    FPS, then 1600x900 is not really the best format, as 10 FPS leads to a
    bad user experience.

    Improve the situation by constraining
    cheese_camera_device_get_best_format() to return the format with the
    highest resolution with a width greater than 640 pixels and a framerate
    of greater the 15 FPS.

    If no mode matching the widh >= 640 && frame_rate >= 15 criteria is found,
    get_best_format will behave as before as simply return the highest
    resolution
    mode.

    Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  - Limit caps to the maximum framerate
    Limit the caps returned by cheese_camera_device_get_caps_for_format() to
    the maximum framerate supported at the requested resolution. This is
    necessary because GStreamer first selects a format and then a framerate,
    resulting in it picking for 1280x720 as an example, YUYV @ 15 FPS,
    instead of MJPEG @ 30 FPS (which will be converted to i420 by the
    videoconvert element in camerabin2), or at 1600x1200 YUYV @ 5 fps
    instead of MJPEG @ 10 fps.

    Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  - Add cheese_camera_device_find_full_format() helper
    Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  - Keep track of highest available camera framerates
    Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  - Add git repository information to DOAP file
  - Post-release version bump to 3.9.91
  - Added/Updated Translations
    - be, courtesy of Yuri Matsuk
    - hu, courtesy of Balázs Úr
    - it, courtesy of Milo Casagrande
    - lt, courtesy of Aurimas Černius
    - pl, courtesy of Piotr Drąg
  - Added/Updated Documentation
    - es, courtesy of Daniel Mustieles
    - hu, courtesy of Gabor Kelemen
    - id, courtesy of Andika Triwidada

version 3.9.90
  - Fix tag in German translation
  - Remove help translations with incompatible license
    Since the license of the help was changed to CC-BY-SA 3.0 Unported, the
    translations must have license that is compatible. Some licenses were
    declared to be the same as the "Cheese package", which would be the GNU
    GPL 2 or later, which is incompatible with CC-BY-SA 3.0 Unported.

    Remove the problematic translations, as they cannot be distributed with
    Cheese unless the license header is updated by the contributors. Fixes
    bug 705568/
  - Change license in header of Chinese simplified translation for help
  - Updated Brazilian Portuguese translation (with header showing properly
    the license)
  - License help under CC-BY-SA 3.0 Unported
    The help was not explicitly under a license, as described in bug 703238.
    Specify the license as CC-BY-SA 3.0 to match with other GNOME help:

    https://wiki.gnome.org/DocumentationProject/Licensing

    License clarification approved by help contributors (found with
    "git shortlog help/C/*.page") as listed below:

    Signed-off-by: Jeremy Bicha <jbicha@ubuntu.com>
    Signed-off-by: Ekaterina Gerasimova <kittykat3756@gmail.com>
    Signed-off-by: Michael Hill <mdhill@gnome.org>
    Signed-off-by: Tiffany Ann Antopolski <tiffany.antopolski@gmail.com>
    Signed-off-by: Julita Inca <jinca@gnome.org>
  - Post-release version bump to 3.9.90
  - Added/Updated Translations
    - cs, courtesy of Marek Černocký
    - de, courtesy of Benjamin Steinwender
    - gl, courtesy of Fran Dieguez
    - he, courtesy of Yaron Shahrabani
    - sl, courtesy of Matej Urbančič
    - th, courtesy of Akom Chotiphantawanon
  - Added/Updated Documentation
    - cs, courtesy of Marek Černocký
    - de, courtesy of Christian Kirbach
    - pt_BR, courtesy of Enrico Nicoletto
    - zh_CN, courtesy of Wylmer Wang

version 3.9.5
  - Remove cheese-actions.ui from po/POTFILES.in
    Fixes bug 704119.
  - Refactor thumbnail context menu event handling
    Use Gdk.Event.triggers_context_menu() rather than checking if the
    secondary button was pressed. Return true if the event was handled, to
    stop further event propagation.
  - Use GAction for thumbnail popup menu actions
  - Post-release version bump to 3.9.5
  - Added/Updated Translations
    - cs, courtesy of Marek Černocký
    - es, courtesy of Daniel Mustieles
    - nb, courtesy of Kjartan Maraas
    - pt_BR, courtesy of Enrico Nicoletto
    - sk, courtesy of Pavol Klačanský
    - tg, courtesy of Victor Ibragimov
    - zh_CN, courtesy of 甘露(Lu Gan)
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao
  - Added/Updated Documentation
    - pt_BR, courtesy of Enrico Nicoletto

version 3.9.4
  - Move gettext initialization to main()
    Ensure that gettext is always initialized, regardless of whether the
    running instance is the primary instance.
  - Make actions insensitive when no webcam is present
    Set the "effects", "mode" and "shoot" actions insensitive when no camera
    devices are found on startup. Fixes bug 693070.
  - Remove TODO
  - Add touch event handler for selecting effects
    Use a ClutterTapAction on each effect to allow either a mouse click or a
    touch tap to select effects. Depend on Clutter 1.13.2 for
    ClutterTapAction. Fixes bug 692745.
  - Updated POTFILES.in and POTFILES.skip
  - Move action sensitivity handling to Application
  - Remove unnecessary instance_pos attribute
    The instance_pos attribute is only used in Cheese when connecting
    signals from actions to handlers with GtkBuilder.
  - Do not show thumbnails in fullscreen
    This can happen when toggling the wide mode action while fullscreen mode
    is active. Also remove the unnecessary resize calls.

    Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  - Remove unused move_all_to_trash action
  - Remove wide-mode and fullscreen GSettings keys
    Both wide mode and fullscreen mode can be set with toggle actions, and
    there is little reason for the state to persist across application
    restart.
  - Mark cheese_[gtk_]init() arguments as allow-none
    It is reasonable to pass NULL for argc and argv.
  - Refactor command-line argument handling
    Only handle Cheese options on the command line; handle library options
    with environment variables instead. Use actions from the command-line
    parser to switch to wide mode and fullscreen mode.
  - Refactor Application startup
    Override default handlers rather than connecting to signals. Add
    startup() and use it to initialize cheese-gtk and gettext.
  - Split main() and Application into separate files
  - um-crop-area.c: Relicense to GPLv2+
    This makes the file fit in better with the rest of Cheese,
    license-wise.

    https://bugzilla.gnome.org/show_bug.cgi?id=703239
  - Remove stale help translations
    Many translations have not been updated since the switch to Mallard
    help, so remove them from HELP_LINGUAS to make the distribution smaller
    and speed up building.
  - Handle NULL state errors in CheeseAvatarChooser
    Fixes remainder of bug 703123.
  - Show an error message if the camera state is NULL
    If there is a GST_MESSAGE_ERROR, stop the stream and emit
    ::state-flags-changed on the CheeseCamera. Handle the state change in
    CheeseWindow by showing a generic error message. This message can easily
    occur if the video device is busy, such as when another application is
    using the webcam.

    Fixes bug 703123.
  - Add CheeseWindow.show_error() method
    Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  - Fix being paused when effect valves are closed
    The move to autocluttersink in 3.9 causes a regression compared to 3.8,
    where if an effect's control valve is closed the pipeline will never
    transition from paused to playing since the cluttersink is stuck in
    paused.

    This regression can be triggered the following way:
    1) Go the effect selector
    2) Go to the next page in the effect selector, so that the now connected
    effects from the first page get their control valve set to closed
    3) Change resolution or device, so that the pipeline gets stopped and
    started again

    After 3) the pipeline will be stuck in pause, as the cluttersinks of the
    effect previews are stuck in pause.

    The cause for this is that with the move to autocluttersink we are no
    longer setting the sink's "async" property, see commit 424afdaa 'Use
    "autocluttersink" instead of "cluttersink"'.

    Setting the "async" property is no longer (easily) doable, since
    autocluttersink is a gstbin derived object which has the actual sink
    embedded.

    Instead this patch fixes the stuck in pause problem by locking the
    autocluttersinks of the effect previews into the playing state.

    Note that no longer setting of the async property on the sink is also
    the root cause of the issue fixed by my patch titled: "Set all valves
    open on play". The opening of the main valve is still necessary, since
    locking the viewfinder sink's state to PLAYING does not seem a good
    idea, the opening of the effects-valve on play OTOH is no longer
    necessary.

    Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  - Use shoot action when handling the webcam button
    Rather then calling on_shoot directly, call the action, so that if shoot
    is disabled, it also cannot be triggered through the webcam button.

    Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  - Set all valves open on play
    If some valves are closed on play, GStreamer will wait for the valves to
    open before moving from paused to playing, and a frozen image is shown.

    This does not happen on startup since on startup all valves are open,
    nor does it happen when changing video-format directly after startup,
    since all valves will still be open. As soon as
    cheese_camera_toggle_effects_pipeline() has been called once, any
    subsequent attempt to change the video format (and thus stopping and
    re-starting the pipeline) will result in a frozen image.

    This patch fixes this by opening all valves on play, and calling
    cheese_camera_toggle_effects_pipeline() with the last active value after
    the pipeline transitions to the playing state.

    This has the added advantage that unlike before the effects valve will
    be closed on startup, rather then staying open till the first call to
    cheese_camera_toggle_effects_pipeline().

    Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  - Avoid setting the same effect again
    Check for the current effect being the same as the one set and if so,
    ignore the change.

    Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  - Disable effects and mode actions while shooting
  - Fix de-activation of effects button
    So that the user does not need to click twice on the effect button
    to change
    the effect (after the first time the effect was changed).

    https://bugzilla.gnome.org/show_bug.cgi?id=698399

    Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  - Reorder Help and About in the app menu
    Move Help to be above About in the application menu so that it complies
    with the HIG.
  - Post-release bump to 3.9.4
  - Added/Updated Translations
    - cs, courtesy of Marek Černocký
    - de, courtesy of Benjamin Steinwender
    - es, courtesy of Daniel Mustieles
    - nb, courtesy of Kjartan Maraas
  - Added/Updated Documentation
    - pt_BR, courtesy of Rafael Ferreira

version 3.9.3
  - Add documentation for CheeseCamera signals
  - Remove unused Cheese.MainWindow.get_data_file_dir
  - Make the flash background white
  - Fix assertion failures when taking a photo
    Before this patch, Cheese would log the following each time the user
    takes a photo:

    (cheese:21719): GLib-GIO-CRITICAL **: g_file_info_get_size: assertion
    `G_IS_FILE_INFO (info)' failed

    (cheese:21719): GLib-GObject-CRITICAL **: g_object_unref: assertion
    `G_IS_OBJECT (object)' failed
  - Fix updating sensitivity of device selection combo
    If Cheese was started with 1 device, and then a second was added, the
    device selection stayed insensitive, making it impossible to select the
    second device.

    This fixes the problem, and also makes the combo insensitive again when
    going from >= 2 devices to <= 1 device.
  - Downscale image for effects-preview pipeline
    Having the whole effects-preview bin deal with ie 1280x800 images is not
    very useful, especially since even when fullscreen on a full-HD monitor,
    the preview images are smaller then 640xXXX. This useless high-res
    processing for 9 preview images in parallel brings my 2nd gen
    core i5 @ 3.1 GHz to its knees, resulting in a non fluid preview panel.

    Also after clicking through all effect preview pages, so that all effect
    preview textures are connected, cheese will use 1 GB of *resident* RAM
    with the example 1280x800 capture resolution.

    This patch improves this by downscaling the images from the video-source
    to 640xXXX where XXX is determined by the original resolution
    aspect-ratio.

    After this patch the effects preview framerate is much smoother, and the
    latency is noticably less. As a bonus the maximal resident size of
    Cheese in this example is reduced to 350 MB.
  - Do not block the main valve while recording
    Otherwise frames intended for the recording are dropped.
  - Only add videoconvert elements where necessary
    The "no effect" effect is our default value, and thus worth optimizing a
    bit. Clearly in the "no effect" effect case adding a videoconvert
    element both before and after the element is not needed.

    Note we also don't add the videoconvert elements when creating the
    initial pipeline, so this also keeps the way the pipeline looks
    initially and when "no-effect" is selected consistent.

    When starting Cheese with "no-effect" selected, this shaves off another
    130 ms of the initial pipeline creation time.
  - Drop unused preview_caps variable
  - Simplify returned GstCaps
    In cheese_camera_device_get_caps_for_format, simplify the returned caps.
    This results in much simpler caps, which as main advantage that they are
    way easier to read when trawling to debug logs.
  - Fix cheese_camera_device_get_best_format memleak
    cheese_camera_device_get_best_format() calls
    cheese_camera_device_get_format_list(), which returns a sorted copy of
    the format lists, then takes the first element of that list, and
    returns a copy of that element. While never freeing the list copy.

    This patch fixes this leak by simply making the priv->formats list
    sorted so that cheese_camera_device_get_best_format can use it directly
    without the need to make (and then later free) a copy.
  - Fix cheese_camera_device_filter_caps warning
  - Remove unused GstCameraBinFlags enum
  - Fix video-source memleak when switching cameras
  - Improve error handling in CheeseCamera
    Simplify error cleanup in cheese_camera_set_camera_source(). Do not call
    g_error_free() on a possible NULL error in
    cheese_camera_element_from_effect().
  - Fix no-video-after-switching-resolution problem
    There is a bug in wrappercamerabinsrc which causes it to lose its
    video-source setting after the pipeline has started, so on a
    stop/re-start, as when changing resolution, its video-source has become
    NULL, and there is no longer video.

    This patch works around this by moving the setting of the video-source
    property to cheese_camera_play(), so that it gets (re)set each time
    before starting the pipeline.

    I've also written a patch fixing the underlying cause, but since the
    workaround is simple, and has no adverse effects when the underlying
    issue is fixed, it seems a good idea to have this workaround in Cheese,
    see here for the gst-plugins-bad fix:

    https://bugzilla.gnome.org/show_bug.cgi?id=701915
  - Remove extranous csp_post_balance element
    camerabin2 already has a videoconvert element both before and after its
    video-source-filter element, so ending the video-source-filter bin with
    a videoconvert element puts 2 videoconvert elements behind each other,
    which is not really useful.
  - Add a capsfilter to the video-source bin
    This serves 2 purposes. Firstly, it forces GStreamer to actually run the
    video source at the configured resolution, rather then say run it at
    1600x1200 @ 5 fps and downscale that to 800x600 (still at 5 fps), as
    GStreamer opts to do with my Logitech Webcam Pro 9000, when left to its
    own auto negotiate code. Secondly, by greatly reducing the amount of
    advertised caps (this cam supports lots of different resolutions at many
    different framerates per resolution), it avoids a caps intersect
    "explosion", reducing the pipeline caps negotiation.
  - Remove nautilus-sendto sharing support
    As nautilus-sendto can now only share by email, the sharing can be
    handled by a photo management application, or directy by the email
    client.
  - Avoid assert when taking avatar photos too quickly
    If the take photo button was pressed while a photo was being taken, an
    assert would be triggered by the failed call to
    cheese_camera_take_photo_pixbuf(). Avoid this by setting the take photo
    button insensitive while a photo is being taken, and setting it
    sensitive after the photo has been taken. Fixes bug 699596.
  - Post-release bump to 3.9.3
  - Added/Updated Translations
    - hu, courtesy of Balázs Úr
    - ja, courtesy of Noriko Mizumoto
    - th, courtesy of Akom Chotiphantawanon
    - zh_CN, courtesy of tuhaihe
  - Added/Updated Documentation
    - de, courtesy of Christian Kirbach

version 3.9.2
  - Make maintainer.sh compliant with POSIX sh
  - Post-release bump to 3.9.2
  - Disable the shoot action if the effects are shown
    Fixes bug 700317.
  - Stop the running countdown on destruction
    Fixes bug 700315.
  - Added/Updated Translations
    - he, courtesy of Yaron Shahrabani
    - lt, courtesy of Aurimas Černius
    - nb, courtesy of Kjartan Maraas
    - sk, courtesy of Pavol Klačanský
    - sl, courtesy of Matej Urbančič

version 3.9.1
  - Fix UI string in avatar chooser test
  - Use AM_VALAFLAGS rather than VALAFLAGS
  - Avoid Vala warning about copying delegates
    Mark the variable in which CountdownCallback is stored as unowned, as it
    is simply a pointer to the callback.
  - Use "autocluttersink" instead of "cluttersink"
  - Use clutter_actor_set_background_color
    Instead of the deprecated cltuter_stage_set_color, use
    clutter_actor_set_background_color.
  - Use clutter_actor_add_child
    Instead of using the deprecated clutter_container_add_actor, use
    clutter_actor_add_child.
  - Avoid deprecated clutter_actor_animate
    Use implicit animation instead.
  - Avoid deprecated clutter_table_layout_set_expand
    Use the "expand-x" and "expand-y" properties on ClutterActor instead
    (which are both set to false by default).
  - Use ClutterActor rather than ClutterRectangle
  - User ClutterActor rather than ClutterBox
    ClutterBox is deprecated.
  - Bump required versions of Clutter and GIO
    GIO 2.32 or above is required for GMenu support and Clutter 1.12 is
    required to make use of new API to avoid deprecation warnings when using
    Clutter 1.12 or above.
  - Avoid Vala compiler warning about implicit begin
  - Fix cheese_thumb_view_new() prototype
  - Remove some unnecessary "static" keywords
    This avoids some warnings from the Vala compiler.
  - Update burst mode help page
    Improve the wording, add more details about the preference dialog.
  - Update the gschema to use "photo" and "image"
    Use "photo" and "image" instead of "picture" so that the schema
    descriptions are more consistent and precise.
  - Improve "Fire Flash" string in the Preferences
    Change "Fire Flash" to "Fire flash" because it is not a title, so should
    not use header capitalisation.
  - Fix typos in help
  - Update help for 3.8
    Mark author emails as not translatable. Correct "version" to
    "pkgversion" in revision tags. Update instructions for app menu and new
    preference dialog tabs. Stub mode-wide.page because the instructions are
    wrong.
  - Replace GtkBox casts with GtkGrid casts
    This manifested as the "Leave Fullscreen" button not being displayed
    when switching into fullscreen mode. Fixed bug 691454.
  - libcheese doesn't need gnome-desktop
    So don't link to it.

    https://bugzilla.gnome.org/show_bug.cgi?id=694288
  - cheese-camera: Fix creation of effects previews
    Since many previews are created, with many cluttersinks, we can't name
    the cluttersinks all the same. Passing NULL as the name of the element
    will let gstreamer choose the name.
  - libcheese: Fix deprecated clutter sink creation
    Create cluttersink with element_factory_make.
  - Depend on valac 0.18 for gstreamer-1.0
    gstreamer-1.0 vala bindings is only available on valac-0.18.
  - Update icon in user help to be untranslatable
  - Fix translations of keywords in .desktop files
  - Improve more translatable strings, bug 695459
    Disambiguate the "Take a photo" string further.
  - Improve some translatable strings, bug 695459
    Add a translator comment and extend some translatable strings to make
    the context more clear.
  - Post-release bump to 3.7.92
  - Added/Updated Translations
    - as, courtesy of Nilamdyuti Goswami
    - be, courtesy of Yuri Matsuk
    - ca, courtesy of xavier
    - ca@valencia, courtesy of xavier
    - cs, courtesy of Marek Černocký
    - da, courtesy of Kenneth Nielsen
    - de, courtesy of Mario Blättermann
    - el, courtesy of Dimitris Spingos (Δημήτρης Σπίγγος)
    - es, courtesy of Daniel Mustieles
    - fa, courtesy of Arash Mousavi
    - fi, courtesy of Jiri Grönroos
    - fr, courtesy of Pierre Henry
    - gl, courtesy of Fran Dieguez
    - hi, courtesy of raj
    - hu, courtesy of Balázs Úr
    - ko, courtesy of Changwoo Ryu
    - lv, courtesy of Rūdolfs Mazurs
    - ml, courtesy of Anish A
    - nl, courtesy of Reinout van Schouwen
    - or, courtesy of Manoj Kumar Giri
    - pt_BR, courtesy of Enrico Nicoletto
    - pt, courtesy of Duarte Loreto
    - sk, courtesy of Pavol Klačanský
    - sr, courtesy of Мирослав Николић
    - sr@latin, courtesy of Miroslav Nikolić
    - ta, courtesy of Shantha kumar
    - tr, courtesy of Muhammet Kara
    - uk, courtesy of Daniel Korostil
  - Added/Updated Documentation
    - ca, courtesy of Gerard Alcorlo Bofill
    - de, courtesy of Tobias111
    - el, courtesy of Dimitris Spingos (Δημήτρης Σπίγγος)
    - es, courtesy of Daniel Mustieles
    - fr, courtesy of Mickael Albertus
    - hu, courtesy of Gabor Kelemen
    - pt_BR, courtesy of Enrico Nicoletto

version 3.7.91
  - Post-release bump to bersion 3.7.91
  - Added/Updated Translations
    - cs, courtesy of Marek Černocký
    - de, courtesy of Mario Blättermann
    - fr, courtesy of Pierre Henry
    - gu, courtesy of
    - pa, courtesy of A S Alam

version 3.7.90
  - Change schema path to standard format, bug 673965
  - Remove libgee dependency from configure.ac
    Since commit 4dc020519fb57a9e0fac806ce9b421a551ffa2a4 Cheese no longer
    depends on libgee.
  - Avoid using libgee
    Rather than port to libgee 0.8, drop use of it entirely.
  - Post-release version bump to 3.7.5
  - Added/Updated Translations
    - an, courtesy of Daniel Martinez
    - eu, courtesy of Iñaki Larrañaga Murgoitio
    - it, courtesy of Milo Casagrande
    - pl, courtesy of Piotr Drąg
    - sr, courtesy of Мирослав Николић
    - sr@latin, courtesy of Miroslav Nikolić
    - ug, courtesy of Gheyret Kenji
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao
  - Added/Updated Documentation
    - de, courtesy of Tobias111
    - es, courtesy of Daniel Mustieles

version 3.7.4
  - Eliminate an instance-used-via-static warning
  - Avoid deprecated GFile attribute syntax
    Bump Vala requirement to 0.16.0.
  - Update photo-take help page
    Update language and add instructions for capturing photo using a
    capture button on a webcam (bug 690961)
  - Shoot when the webcam capture button is pressed
    This functionality existed is Cheese 2.32 (it was added in commit
    de0114556cef148c396552d1c189b476ea0c8aab) but was lost in 3.0. Add it
    back to fix bug 690961.
  - Post-release bump to version 3.7.4
  - Added/Updated Translations
    - an, courtesy of Jorge Pérez Pérez
    - bg, courtesy of Krasimir Chonov
    - el, courtesy of Dimitris Spingos (Δημήτρης Σπίγγος)
    - et, courtesy of Mattias Põldaru
    - fur, courtesy of TmTFx
    - gl, courtesy of Fran Dieguez
    - he, courtesy of Yaron Shahrabani
    - hu, courtesy of Balázs Úr
    - kk, courtesy of Baurzhan Muftakhidinov
    - lt, courtesy of Aurimas Černius
    - nb, courtesy of Kjartan Maraas
    - ru, courtesy of Aleksej Kabanov
    - sl, courtesy of Matej Urbančič
    - th, courtesy of Akom Chotiphantawanon

version 3.7.3
  - Return to the video view after selecting an effect
    Fixes bug 687879.
  - More g_thread_init() removal
    Add --target-glib 2.32 to the VALAFLAGS so that we don't get
    g_thread_init() in the generated .c code.
  - Drop calls to g_thread_init() in tests
    Our dependency on Gtk 3.4 already gives us an indirect dependency on a
    GLib that no longer requires these calls.

    We got away with this for a while due to gstreamer's public dependency
    on libgthread, but as of bug 689043 gstreamer no longer does this so we
    now get link errors.

    https://bugzilla.gnome.org/show_bug.cgi?id=689117
  - Handle thumbnail directory creation, bug 671614
  - Return NULL rather than a const empty string
    Fix bug 687042 and bug 687123 by returning NULL from
    cheese_camera_get_recorded_time() rather than a const empty string. The
    returned NULL can be safely freed with g_free(), whereas freeing the
    const string is undefined and leads to a crash with glibc.
  - Add keywords to the desktop file
    This makes gnome-shell search more satisfying.

    https://bugzilla.gnome.org/show_bug.cgi?id=687006
  - Add some missing mnemonics, bug 684513
  - Post-release verson bump to 3.7.1
  - Added/Updated Translations
    - an, courtesy of Jorge Pérez Pérez
    - as, courtesy of Nilamdyuti Goswami
    - ca@valencia, courtesy of Gil Forcada
    - el, courtesy of Tom Tryfonidis
    - es, courtesy of Daniel Mustieles
    - pl, courtesy of Piotr Drąg
    - sk, courtesy of Pavol Babinčák
    - ta, courtesy of Shantha kumar
  - Added/Updated Documentation
    - lv, courtesy of Rūdolfs Mazurs
    - sl, courtesy of Andrej Žnidaršič

version 3.6.0
  - Added/Updated Translations
    - bg, courtesy of Krasimir Chonov
    - bn_IN, courtesy of Sayak Sarkar
    - et, courtesy of Mattias Põldaru
    - fr, courtesy of Pierre Henry
    - ja, courtesy of Noriko Mizumoto
    - ky, courtesy of Timur Zhamakeev
    - ml, courtesy of Ani Peter
    - pa, courtesy of A S Alam
    - te, courtesy of Krishnababu Krothapalli
    - th, courtesy of Akom Chotiphantawanon
    - uk, courtesy of Re.
    - zh_CN, courtesy of YunQiang Su
  - Added/Updated Documentation
    - el, courtesy of Tom Tryfonidis
    - fr, courtesy of Bruno Brouard

version 3.5.92
  - Post-release version bump to 3.5.92
  - Added/Updated Translations
    - be, courtesy of Yuri Matsuk
    - cs, courtesy of Marek Černocký
    - da, courtesy of Kenneth Nielsen
    - en_GB, courtesy of Bruce Cowan
    - fa, courtesy of Arash Mousavi
    - fi, courtesy of Jiri Grönroos
    - fr, courtesy of Pierre Henry
    - gl, courtesy of Leandro Regueiro
    - hi, courtesy of rajesh
    - hu, courtesy of Gabor Kelemen
    - ko, courtesy of Seong-ho Cho
    - lv, courtesy of Rūdolfs Mazurs
    - or, courtesy of Manoj Kumar Giri
    - pt_BR, courtesy of Fábio Nogueira
    - ru, courtesy of Yuri Myasoedov
    - tr, courtesy of Muhammet Kara
  - Added/Updated Documentation
    - fr, courtesy of Bruno Brouard
    - gl, courtesy of Fran Dieguez
    - hu, courtesy of Gabor Kelemen
    - pt_BR, courtesy of Gabriel Speckhahn

version 3.5.91
  - Post-release version bump to 3.5.91
  - Fix another missing stdlib.h include
    For EXIT_FAILURE.
  - Bump libtool versioning after GStreamer 1.0 port
  - Move variable declarations before code in C source
    This allows compilation to succeed with
    ‘-Werror=declaration-after-statement’ passed to GCC.
  - Fix comment about preset locations
    Update for new location in GStreamer 1.0.

    https://bugzilla.gnome.org/show_bug.cgi?id=680422
  - Update pkg-config dependencies for GStreamer 1.0
    https://bugzilla.gnome.org/show_bug.cgi?id=680422
  - Fix dependencies for Cheese introspection
    Update for GStreamer 1.0.

    https://bugzilla.gnome.org/show_bug.cgi?id=680422
  - Add stdlib.h include for EXIT_SUCCESS
  - Depend on the new clutter-gst version
  - Update to the new pad template name
  - Rename ffmpegcolorspace to videoconvert
    The element was renamed in GStreamer 1.0.
  - Update raw caps to new format
    There is no video/x-raw-yuv or -rgb, they are both now video/x-raw with
    a format field.
  - Update to GStreamer 1.0 API
  - Rename camerabin2 to camerabin
    camerabin2 was renamed to camerabin in GStreamer 1.0.
  - Depend on gstreamer-1.0
  - Do not set filter-caps property on camerabin2
    The "filter-caps" property doesn't exist on camerabin2.
  - Re-add GstCaps variable in CheeseCamera
    caps variable was removed during rebase, but it is still used.
  - Fix CheeseCamera recording time reporting
    Camerabin2 maintains its pipeline clock continuously running, this makes
    the time reporting for video recording actually report the time since
    camerabin2 was initialized.

    This patch fixes it by querying the video filesink for the correct
    recording time.
  - Check for camerabin2 instead of camerabin
  - Encode WebM/VP8 instead of OGG/Theora
    Create WebM profile and use it with camereabin2. Also use presets for
    vp8enc.
  - Stop-capture is asynchronous in camerabin2
    Wait for video-done message to signal that capture is over.
  - Image-done message is posted by camerabin2
    Camerabin2 is the element to post the image-done message, not the camera
    source.
  - Remove unused variables warnings in CheeseCamera
  - Split setting of CheeseCamera caps from playing
    Add new cheese_camera_set_new_caps() method, split from
    cheese_camera_play().
  - Set ClutterTextureVideoSink sync=false
    Without this the sink will issue a warning:

  ** (cheese:21655): WARNING **: Internal data flow problem.:
    gstbasesink.c(3626): gst_base_sink_chain_unlocked ():
  /GstCameraBin2:camerabin2/GstViewfinderBin:vf-bin/ClutterGstVideoSink:cluttergstvideosink0:
    Received buffer without a new-segment. Assuming timestamps start from 0.

    I'm not sure what the implications of this setting are. It might be
    caused by the clock/time rewriting magic from camerabin2.
  - Do not switch mode when stopping video recording
  - Set the video resolution
    Use the viewfinder-caps property of camerabin2, rather than the
    set-video-resolution-fps signal of camerabin.
  - Fix pixbuf-only capture
    camerabin2 sends the preview-image bus message through the
    gstwrappercamerabinsrc.

    In camerabin2 if the location is NULL, it is interpreted as a "don't
    write in a file just post the buffer as a bus message".
  - Enable post-preview property when needed
    When taking a photo to pixbuf, sets post-preview to enable camerabin2 to
    send the preview message.
  - Remove camerabin workaround
    No longer needed with camerabin2.
  - Convert image-done to a bus message, from a signal
    Quote from camerabin2's PORTING guide:

    In camerabin, image-done is a signal, in camerabin2, it is a bus message

    Signed-off-by: Raluca Elena Podiuc <ralucaelena1985@gmail.com>
  - Use definitions of MODE_IMAGE/VIDEO from camerabin
   #ifndef GST_USE_UNSTABLE_API
   #warning "camerabin enums are unstable API and may change in future."
   #warning "You can define GST_USE_UNSTABLE_API to avoid this warning."
   #endif
  - Handle photo/video moved to monitored directories
    Camerabin2 creates a temporary file, writes data to it and in the end it
    moves it to the destination path.

    Without G_FILE_MONITOR_SEND_MOVED to g_file_monitor_directory, moves
    would be sent as DELETE + CREATE.

    Unfortunately, we would also get CREATE events when the temporary file
    was created. We cannot listen for CREATE events as temporary files would
    be CREATEd and then CHANGEd and the thumb-view creation code would work
    with bad data.

    By using G_FILE_MONITOR_SEND_MOVED we get a single event when the file
    is moved. As the file monitor ignores files with unknown extensions (as
    is the case for the temporary files created by camerabin2) we could only
    just append the new file. But because the user might also move a
    picture/video manually from the Pictures/Webcam or Videos/Webcam
    directories, removing the old file from the thumb-view keeps it
    up-to-date with the state of the file system.

    If camerabin2 switches away from the create-temp+move approach, to the
    camerabin one (create the destination file directly), we're prepared
    to handle that code with G_FILE_MONITOR_EVENT_CHANGES_DONE_HINT.
  - Rename filename and capture-start/stop
    Quote from camerabin2's PORTING guide:

[...] is now called 'location' instead of 'filename'

    The signals were renamed from capture-start/stop to start/stop-capture
    as this is the usual naming on actions.
  - Video filter on camera_source applies to all modes
    If the effect is applied on camera_source, the effect will be available
    in viewfinder and image/video capture modes.
  - Minimal functionality based on camerabin2
    These are the minimal changes needed to integrate camerabin2.

    Support for:
      - viewfinder (Cheese's main window)
      - effect previews

    Porting details:
      - obviously, the name has changed to camerabin2
      - Camerabin2 requires something special from it's "camera-source".

    We use the "wrappercamerabinsrc" module provided by camerabin2 which
    creates a "camera-source" suitable for camerabin2 based on a regular
    video source.
  - Depend on GTK+ 3.4.4 for GtkIconView changes
  - Request correct number of thumbview columns
    Rather then assuming 5000 will be enough, just set the number of columns
    to the number of thumbnails in the view. Fixes bug 634958 and bug 678446.

    Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  - Add missing stdlib.h includes
    For the EXIT_* macro definitions.

    https://bugzilla.gnome.org/show_bug.cgi?id=682491
  - Remove unneeded XOverlay includes
    https://bugzilla.gnome.org/show_bug.cgi?id=682490
  - Ensure width is a multiple of 8, and height of 2
    We ask GStreamer to use an YUV format in the pipeline, by setting the
    camerabin's "filter-caps" to "video/x-raw-yuv", and GStreamer demands of
    YUV format frames that their width is a multiple of 8, and their height
    a multiple of 2.

    Previous to this patch my bttv tvcard lists the following resolutions in
    Cheese:
    924x576 (*)
    920x576
    640x480
    462x288 (*)
    460x288 (*)
    320x240
    231x144 (*)
    230x144 (*)
    160x120

    Where all the ones marked with an asterisk do not work.

    After this patch the list is:
    920x576
    640x480
    456x288
    320x240
    224x144
    160x120

    And all work.

    Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  - Fix cheese_camera_device_update_format_table loop
    Some devices report a very small min_width / height down to reporting
    0x0 as minimum resolution, which causes an infinite loop in
    cheese_camera_device_update_format_table().

    This patch limits the minimum resultion to 160x120, both to fix the
    infinite loop issue, and to remove ridiculous resolutions such as 2x2,
    5x3, 11x7, 22x15 etc. which are seen in the resolution drop down on some
    devices.

    For more details on the infinite loop issue, see:
    https://bugzilla.redhat.com/show_bug.cgi?id=850505

    Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  - Post-release version bump to 3.5.90
  - Added/Updated Translations
    - as, courtesy of Nilamdyuti Goswami
    - de, courtesy of Tobias Endrigkeit
    - gl, courtesy of Leandro Regueiro
    - gu, courtesy of "Last-Translator: \n"
    - he, courtesy of Yaron Shahrabani
    - id, courtesy of Dirgita
    - it, courtesy of Francesco Valente
    - kn, courtesy of Shankar Prasad
    - lt, courtesy of Aurimas Černius
    - mr, courtesy of Sandeep Shedmake
    - nb, courtesy of Kjartan Maraas
    - pl, courtesy of Piotr Drąg
    - pt, courtesy of Duarte Loreto
    - sr, courtesy of Мирослав Николић
    - sr@latin, courtesy of Miroslav Nikolić
    - ta, courtesy of Dr.T.Vasudevan
    - vi, courtesy of Nguyễn Thái Ngọc Duy
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao
  - Added/Updated Documentation
    - de, courtesy of Mario Blättermann

version 3.5.5
  - Fix zh_CN translation markup
  - Set G_LOG_DOMAIN for libcheese and libcheese-gtk
    Define the logging domain for the GLib logging system, so that messages
    are prefixed with the name of the library.
  - Fix missing translation for a string
    https://bugzilla.gnome.org/show_bug.cgi?id=680756
  - Post-release bump to version 3.5.5
  - Added/Updated Translations
    - as, courtesy of Nilamdyuti Goswami
    - de, courtesy of Tobias Endrigkeit
    - el, courtesy of Tom Tryfonidis
    - es, courtesy of Daniel Mustieles
    - gl, courtesy of Fran Dieguez
    - gu, courtesy of "Last-Translator: \n"
    - ja, courtesy of Jiro Matsuzawa
    - sl, courtesy of Matej Urbančič
    - zh_CN, courtesy of Wylmer Wang
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao
  - Added/Updated Documentation
    - zh_CN, courtesy of Wylmer Wang

version 3.5.4
  - Require Clutter 1.10.0 for aspect frame changes
  - help: fixed broken links in Mallard docs
  - libcheese: Use Totem's aspect frame
    Based on the same code as the CheeseAspectFrame, but with
    the mx dependency removed.

    https://bugzilla.gnome.org/show_bug.cgi?id=678976
  - help: Fix Greek help translation
    Ampersands need to be escaped in the translations.
  - docs: Don't try to get documentation from marshal files
  - Post-release version bump to 3.5.4
  - Added/Updated Translations
    - as, courtesy of Nilamdyuti Goswami
    - be, courtesy of Yuri Matsuk
    - bg, courtesy of Krasimir Chonov
    - el, courtesy of Tom Tryfonidis
    - es, courtesy of Daniel Mustieles
    - gl, courtesy of Fran Dieguez
    - he, courtesy of Yaron Shahrabani
    - id, courtesy of Andika Triwidada
    - nb, courtesy of Kjartan Maraas
    - sl, courtesy of Matej Urbančič
  - Added/Updated Documentation
    - el, courtesy of Tom Tryfonidis
    - es, courtesy of Daniel Mustieles
    - id, courtesy of Andika Triwidada

version 3.5.3
  - Add border to capture page of preferences dialog
  - Add accelerators to menu items
  - Make the preferences dialog work again
    Move the Cheese.Camera to Cheese.Main and use the same camera in
    Cheese.MainWindow and Cheese.PreferencesDialog. Setup the Camera in
    Cheese.Main.
  - Enable handling of the shoot action
  - Enable effects state change action
  - Enable handling of the fullscreen action
  - Set photo button text based on mode state
  - Make preferences and mode actions application-wide
    Move PreferencesDialog from MainWindow to Main. Handle app.mode action
    changes and update the state accordingly.
  - Add David King to authors in about dialog
  - Start porting to application-wide GMenu
    Add a menu to the application, and enable application-wide actions for
    showing the help, showing the about dialog and quitting the application.
    Move the GtkBuilder definition of the about dialog into Cheese.Main.
  - Update TODO
    Remove some completed TODO items.
  - Use a realtime preset for video encoder element
    Use the ‘Profile Realtime’ preset for vp8enc to set reasonable defaults
    for realtime encoding. The preset was added in gst-plugins-bad 0.10.23,
    so fall back to reasonable defaults. Fixes bug 668560 and partially
    fixes bug 674779.
  - Do not add 0-sized files to the thumb view
    Sometimes, ie when Cheese crashes when starting to record, something which
    we need to fix, 0 bytes large files are created under ~/Videos/Webcam.

    totem-video-thumbnailer does not like these, getting stuck for around a
    minute on them, I have filed bug 677734 for this.

    But even with this bug fixed, trying to add 0 byte sized files to the
    thumb view makes no sense, and in the mean time it also neatly works
    around this totem-video-thumbnailer bug.

    Fixes bug 677735.
  - Do not overwrite camerabin's default flags
    The comment above this code said: "Set flags to enable conversions", but
    camerabin has conversion enabled in the necessary places by default, all
    the code does is add an extra, unneeded ffmpegcsp element at the
    beginning of the pipeline.

    This results in a huge number of reported caps on pads further down the
    pipeline, which when intersected with input caps of later ffmpegcsp
    elements leads to an explosion of possible combinations and
    gst_caps_intersect_full starts consuming the CPU for 100% for seconds
    (various Fedora users have reported startup delays of upto a minute).

    On my test system, with a Logitech Webcam 9000 Pro, the time to create
    the camerabin pipeline (not start, not configure, just create!) drops
    from 7 seconds to 0.7 seconds by elimenating the unnecessary ffmpegcsp
    element at the beginning of the pipe.

    The only reason the ffmpegcsp element this patch removes could be useful
    would be for cameras producing only JPEG data, but since Cheese always
    uses v4l2src, and that should always be compiled with libv4l2 support
    (otherwise a lot of camera specific video formats will not be
    understood), libv4l2 will take care of JPEG decompression, so there
    really is no reason for having this extra element, and thus no reason to
    override the default camerabin flags.

    Fixes bug 677731.

  - Add libcheese headers to GIR source files
  - Fix images missing from effect buttons
    Commit 4cb11731e62b51c684993e43000c933ea97785c2 fixed the images missing
    from the photo / video / burst buttons, but the same problem also
    affects the previous effects-page, effects, next effects-page buttons.
    This patch fixes them too.

    Note that unlike the commit message of commit 4cb11731 suggest this
    not only fixes the printing of warnings to the console, it also fixes
    the pixmaps actually missing from the buttons. Fixes bug 677543.
  - Do not add NULL devices to the camera list
    cheese_camera_device_monitor_set_up_device() will return NULL for non
    video devices (ie vbi & radio devices). Emitting the added signal with
    such a NULL device, causes it to get added to the camera list, which
    later on causes cheese to crash.

    This patch fixes this by not emitting the added signal for non camera
    devices. Fixes bug 677574.
  - Post-release version bump to 3.5.3
  - Added/Updated Translations
    - as, courtesy of Nilamdyuti Goswami
    - el, courtesy of Ioannis Zampoukas

version 3.5.2
  - Depend on intltool 0.50 for GSettings translations
  - Use G_SOURCE_REMOVE and _CONTINUE
  - Use GDK provided work area code, bug 670996
  - Remove markup from translatable string
  - Updated help makefile
  - Add fullscreen help page
  - Update help index page
  - Updated introduction help page
  - Efstathios Iosifidis <diamond_gr@freemail.gr>
  - Added/Updated Translations
    - es, courtesy of Daniel Mustieles
    - fr, courtesy of Pierre Henry
    - gl, courtesy of Fran Dieguez
    - he, courtesy of Yaron Shahrabani
    - ja, courtesy of Jiro Matsuzawa
    - nb, courtesy of Kjartan Maraas
    - pt_BR, courtesy of Gabriel Speckhahn
    - sl, courtesy of Matej Urbančič
  - Added/Updated Documentation
    - el, courtesy of Efstathios Iosifidis
    - es, courtesy of Daniel Mustieles
    - fr, courtesy of Bruno Brouard

version 3.5.1
  - Add cheese_camera_get_recorded_time to API doc
  - Properly quote $UDEV_REQUIRED variable, bug 673628
    Otherwise configure fails on systems which don't have libgudev
    installed.
  - Stop warnings caused by the mode buttons
    Once we've set the related action, the label will have been synced, and
    we won't be able to add an image to the button.

    Setting "use-action-appearance" to False before setting the
    related-action works around the problem. See GTK+ bug 671912.

    https://bugzilla.gnome.org/show_bug.cgi?id=671913
  - Show a timer when recording a video
    Fixes bug 599729.
  - Add documentation for cheese_camera_set_tags
  - Add some metadata tags to produced files
    Metadata is important for search and management applications. These tags
    should help to track files produced by Cheese.

    Signed-off-by: Oleksij Rempel (Alexey Fisher) <bug-track@fisher-privat.net>
  - Post-release version bump to 3.5.1
  - Added/Updated Translations
    - el, courtesy of Tom Tryfonidis
    - es, courtesy of Daniel Mustieles
    - gl, courtesy of Fran Dieguez
    - he, courtesy of Yaron Shahrabani
    - ja, courtesy of Hideki Yamane
    - nb, courtesy of Kjartan Maraas
    - sl, courtesy of Matej Urbančič
    - te, courtesy of Sasi Bhushan Boddepalli
  - Added/Updated Documentation

version 3.4.0
  - Post-release version bump to 3.4.0
  - Added/Updated Translations
    - cs, courtesy of Lucas Lommer
    - eo, courtesy of Kristjan SCHMIDT
    - gu, courtesy of "Last-Translator: \n"
    - pt, courtesy of Duarte Loreto
    - te, courtesy of GVS.Giri
    - vi, courtesy of Nguyễn Thái Ngọc Duy
  - Added/Updated Documentation
    - lv, courtesy of Rūdolfs Mazurs
    - te, courtesy of Bhuvan Krishna

version 3.3.92
  - Bump version to 3.3.92
  - Avoid overwriting errors in CheeseCamera
    As pointed out by Bastien Nocera in bug 671902, CheeseCamera overwrites
    GError pointers. Avoid this by setting the error and returning
    immediately afterwards.
  - Move variable declarations before code in C source
    This allows compilation to succeed with
    ‘-Wdeclaration-after-statement -Werror=declaration-after-statement’
    passed to GCC.
  - Handle smooth scroll wheel events in EogThumbNav
    Fixes bug 672311.
  - Avoid gtk_main_quit warning on exit
    When the last window is destroyed, GApplication will automatically exit
    the main loop. Stops warnings like this on exit:

    Gtk-CRITICAL **: gtk_main_quit: assertion `main_loops != NULL' failed

    which occur with GTK+ versions 3.3.4 or greater, when GtkApplication was
    changed to not override the GApplication mainloop.

    https://bugzilla.gnome.org/show_bug.cgi?id=671904
  - Post-release version bump to 3.3.91
  - Added/Updated Translations
    - ar, courtesy of Ibrahim Saed
    - as, courtesy of Nilamdyuti Goswami
    - bg, courtesy of Krasimir Chonov
    - ca, courtesy of Gil Forcada
    - da, courtesy of Kenneth Nielsen
    - de, courtesy of Mario Blättermann
    - en_GB, courtesy of Bruce Cowan
    - eu, courtesy of Iñaki Larrañaga Murgoitio
    - fa, courtesy of Arash Mousavi
    - fi, courtesy of Jiri Grönroos
    - fr, courtesy of Alain Lojewski
    - hi, courtesy of chandankumar(ciypro)
    - hu, courtesy of Gabor Kelemen
    - it, courtesy of Milo Casagrande
    - km, courtesy of Seng Sutha
    - kn
    - ko, courtesy of Seong-ho Cho
    - lt, courtesy of Aurimas Černius
    - lv, courtesy of Anita Reitere
    - nb, courtesy of Kjartan Maraas
    - pa, courtesy of A S Alam
    - pl, courtesy of Piotr Drąg
    - pt_BR, courtesy of Gabriel Speckhahn
    - ta, courtesy of Dr.T.Vasudevan
    - ug, courtesy of Sahran
    - uk, courtesy of Korostil Daniel
    - zh_CN, courtesy of Wylmer Wang
  - Added/Updated Documentation
    - hu, courtesy of Gabor Kelemen

version 3.3.90
  - Bump libcheese and libcheese-gtk versions
  - Initialise X11 threading, bug 669845
  - Improve sending files to the trash
    Split off the trashing to a separate method. Use Path.build_filename
    rather than concatenation of the strings. Simplify the logic slightly.
  - Use video path for trashing videos, bug 670178
    The photo path was used for deleting videos, which would fail if the
    paths were different.
  - Install catalog instead of individual package
    Replaced hardcoding the nautilus-sendto package name in the code for
    runtime installation. Instead, a catalog (cheese.catalog) is used.
    Fixes bug 669547.
  - Post-release version bump to 3.3.90
  - ui: properly handle "delete-event" signal at Preferences dialog,
    fixes bug 669384
    this bug was resolved once before, here is a short solution description:
    the "close" event triggered by the escape key was destroyng the dialog, so
    when an user tries to open the Preferences dialog again what appears is
    an empty/tiny window. Handle the "delete-event" connecting it with
    hide_on_delete() successfully solved the problem.
  - Added/Updated Translations
    - be, courtesy of Yuri Matsuk
    - et, courtesy of Mattias Põldaru
    - ml, courtesy of Anish A
    - nb, courtesy of Kjartan Maraas
    - ru, courtesy of Yuri Myasoedov
    - tr, courtesy of Muhammet Kara
  - Added/Updated Documentation
    - de, courtesy of Mario Blättermann
    - fr, courtesy of Bruno Brouard

version 3.3.5
  - Use default PackageKit interaction modes
    Do not hardcode the PackageKit interaction modes, so that distribution
    defaults are used, for example for whether to show a confirmation dialog
    when requesting package installation. See the comments on bug 668072 for
    some further reasoning.
  - Disambiguate GLib.DBus in Cheese.Window
  - Use PackageKit for nautilus-sendto dependency
    The user has the option to install nautilus-sendto runtime dependency
    with PackageKit, in case it is not already installed.
    Fixes bug 668072.
  - Fix Slovenian help translation
    The incorrect closing tag caused a build failure, reported by Luca
    Bruno.
  - Post-release version bump to 3.3.5
    As Cheese provides shared libraries, it is more friendly to bump the
    version after a release. As requested by Frédéric Péters.
  - Keep generating thumbnails for Theora videos
  - Check for VP8/WebM codecs during configure
  - Initial switch from theora/ogg to vp8/webm
    It is time to go webm :)
    Fixes bug 564957 and 666718.
  - Fix configure check for Xtst
  - Adapt to use new cheese_init and cheese_gtk_init
    Additionally, use EXIT_SUCCESS and EXIT_FAILURE when exiting.
  - Add init functions to libcheese and libcheese-gtk
    Adding wrappers around clutter_gst_init() and clutter_gtk_init() reduces
    confusion for API users, as well as reducing link-time dependencies.
    Provides a clean fix for bug 668292 and bug 667884.
  - Check nautilus-sendto dependency in configure
    Check whether nautilus-sendto is installed in the configure script. This
    is only required in order to use the sharing functionality, so a warning
    is presented if nautilus-sendto is not found.
    Fixes bug 668072.
  - Mimic Nautilus' behaviour when deleting files
    Show one dialog to ask for confirmation of operation. For each error
    show a dialog and allow to skip all errors, skip this error or stop
    deleting using Cancel.
    Fixes bug 664180.
  - Added/Updated Translations
    - es, courtesy of Daniel Mustieles
    - gl, courtesy of Fran Dieguez
    - he, courtesy of Yaron Shahrabani
    - nb, courtesy of Kjartan Maraas
    - sl, courtesy of Matej Urbančič
    - sr, courtesy of Мирослав Николић
    - sr@latin, courtesy of Miroslav Nikolić
    - sv, courtesy of Daniel Nylander
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao
  - Added/Updated Documentation
    - gl, courtesy of Fran Dieguez
    - sl, courtesy of Andrej Žnidaršič

version 3.3.4
  - Pre-release version bump to 3.3.4
  - Add videos and picture sharing support, bug 522210
    Integrated nautilus-sendto with Cheese in order to add support for sharing
    videos and images with different technologies.
  - Cut CONSTRUCT_ONLY from CheeseAvatarChooser:pixbuf
  - Use g_clear_object() to clear GObject pointers
  - Mark property strings with G_PARAM_STATIC_STRINGS
  - Check for DTD and stylesheets for man generation
    Copy M4 checks for installed XML catalogs from gtk-doc. Use the checks
    in configure.ac to only enable man generation when the required DTDs and
    stylesheets are available.
  - Fixed bug #667172: there are some errors in Catalan documentation
  - help: fix gnome help links, re-try
  - help: fix gnome-help links
    gnome-help uses help: links as of gnome-user-docs 3.2
  - Set PulseAudio media role to ‘production’
    This hints to PulseAudio that a microphone control should be presented
    to the user. Fixes bug 666875.
  - Mark Cheese.Window strings for translation
    Fixes bug 666847.
  - Remove .gcno files during clean, not lcov-clean
  - Use G_DEFINE_BOXED_TYPE for CheeseVideoFormat
  - Extend libcheese tests
    Add CheeseVideoFormat creation and copy test. Add
    CheeseCameraDeviceMonitor test. Add test function for
    cheese_fileutil_get_new_media_filename().
  - Disable compiler optimisation when lcov is enabled
  - Correct PACKAGE_LOCALEDIR, bug 666826
  - Fix and simplify ChangeLog generation
  - Clean all files generated by lcov report creation
  - Add code coverage reporting, using lcov
    Introduce new Makfile targets lcov and lcov-clean, to generate an HTML
    report of libcheese test code coverage and clean up the generated files.
    Check for lcov and genhtml in configure.ac.
  - Minor improvements to configure script
    Use https for bug report URL. Log the GStreamer plugin output to
    config.log. Correct the gtester-report check test.
  - Improve test and distcheck Makefile targets
    Drop obsolete --disable-scrollkeeper from distcheck configure flags.
    Use the same environment for testing and test reporting.
  - Add basic CheeseEffect test
  - Improve Preferences.setup_resolutions_for_device
    Use List.foreach() rather than a for loop. Use multiplication sign, not
    the letter x.
  - Added/Updated Translations
    - ast, courtesy of Xandru Armesto
    - be, courtesy of Yuri Matsuk
    - de, courtesy of Paul Seyfert
    - es, courtesy of Daniel Mustieles
    - et, courtesy of Mattias Põldaru
    - fi, courtesy of Jiri Grönroos
    - gl, courtesy of Fran Dieguez
    - he, courtesy of Yaron Shahrabani
    - ja, courtesy of Hideki Yamane
    - mk, courtesy of "Last-Translator: Jovan N\n"
    - nb, courtesy of Kjartan Maraas
    - ru, courtesy of Yuri Myasoedov
    - th, courtesy of Akom Chotiphantawanon
    - tr, courtesy of Muhammet Kara
  - Added/Updated Documentation
    - ca, courtesy of Gerard Alcorlo Bofill
    - es, courtesy of Daniel Mustieles
    - fr, courtesy of Bruno Brouard

version 3.3.3
  - Pre-release version bump to 3.3.3
  - Do not dist non-existent gnome-doc-utils.make
    Fixes bug 666252.
  - Improve tests for libcheese-gtk
    Split the tests so that there is one per widget. Add CheeseFlash test.
  - Improve tests for CheeseFileUtil
    Add burst_reset test. Add photo and video path tests. Improve existing
    burst test.
  - Split tests for libcheese and libcheese-gtk
  - Add simple test suite, bug 663148
  - Add non-interactive test infrastructure
    This is just the Makefile changes, the test itself was written
    separately.
  - Allocate CheeseVideoFormat with slices
  - Check for correct types in public API
    Use g_return_*_if_fail() to print critical warnings and return sensible
    values if the expected type was not supplied.
  - Add CheeseEffect accessors to VAPI file
  - Fix tag in help
  - Fix Latvian and Galician help translation
    The switch to yelp-tools for building the Mallard help uncovered a
    couple of invalid translations, due to incorrect closing tags.
  - Use yelp-tools to build help, not gnome-doc-utils
  - Simplify autogen.sh
  - Check for a valid effect in CheeseEffect
    Check that the effect passed to CheeseEffect functions is valid, and
    return NULL and print a critical warning otherwise.
  - Revert "effects: user ** in doc-comments to enable color highlighting"
    This reverts commit 27b6b05723376c3ea5bf178bed59dd973f302e0a.

    gtk-doc comments, started with the double-asterisk sequence, should only
    be used for public symbols.
  - effect: add cheese_effect_get_name and cheese_effect_get_pipeline_desc
    Adding getters to save an allocation.

    Requested in: https://bugzilla.gnome.org/show_bug.cgi?id=654448#c53
  - effects: user ** in doc-comments to enable color highlighting
  - libcheese: effects: don't print CRITICAL errors if directory doesn't exist
    Applications should use cheese_effect_load_effects to load the default
    set of effects.

    cheese_effect_load_effects() calls
    cheese_effect_load_effects_from_directory() with a list of predefined
    places to search for effects. Some of those directories may not exist.

    cheese_effect_load_effects_from_directory() shouldn't emit CRITICAL
    messages in this condition.
  - Replace all GtkBoxes by GtkGrids, bug 664428
  - Added/Updated Translations
    - es, courtesy of Daniel Mustieles
    - he, courtesy of Yaron Shahrabani
    - lv, courtesy of Rūdofls Mazurs
    - nb, courtesy of Kjartan Maraas
    - ru, courtesy of Yuri Myasoedov
    - sv, courtesy of Daniel Nylander
    - te, courtesy of Praveen Illa
    - th, courtesy of Akom Chotiphantawanon
    - zh_CN, courtesy of Wylmer Wang
  - Added/Updated Documentation
    - el, courtesy of Simos Xenitellis
    - es, courtesy of Daniel Mustieles
    - gl, courtesy of Leandro Regueiro
    - lv, courtesy of Rūdofls Mazurs
    - ru, courtesy of Yuri Myasoedov

version 3.3.2
  - Pre-release version bump to 3.3.2
  - Remove marshaller generation rules
    The generic marshallers, supplied by GLib, are used instead.
  - Make preferences dialog more netbook-friendly
    Fixes bug 663146.
  - Convert deprecated GtkVBox and GtkHBox to GtkBox
    Fixes bug 661661.
  - Add chapter IDs to documentation
  - Add Cheese architecture diagram to documentation
    Fixes bug 664333.
  - Set camerabin to playing before start-capture
    Fixes bug 663998, with the camerabin documentation being updated in bug
    664048.
  - Use private GObject pointer in Widget and Chooser
    Additionally, remove some dead code.
  - Add gtk-doc comments to UmCropArea
    Currently, UmCropArea is internal (and will likely stay that way), so
    the comments are not included in the generated documentation.
  - Use switch statement to select cases
  - Use better API to notify and install properties
    Changed g_object_notify_by_pspec() to g_object_notify() and
    g_object_class_install_property() to
    g_object_class_install_properties(). Added properties static array to
    hold properties. Added enum constants identifying properties and
    sentinels for array length definitions. Fixes bug 663098.
  - Improve CheeseAvatarChooser documentation
    Add documentation for private methods in CheeseAvatarChooser.
  - Improve CheeseEffect documentation
    Document the private methods in CheeseEffect. Simplify effect
    construction, by making the name and pipeline-desc properties
    construct-only. Improve some variables names.
  - Improve CheeseFileUtil filename handling
    Use GDateTime to format the time string. Use switch statements when
    selecting cases from an enum. Use g_build_filename() rather than
    g_strjoin(G_DIR_SEPARATOR_S, ...).
  - Improve CheeseCamera documentation
    Document most of the private methods in CheeseCamera, and rename the
    device-name property to device-node.
  - Improve CheeseCameraDevice documentation
    Document most of the private methods in CheeseCameraDevice, and rename
    some variables to more closely match the property names.
  - Improve CheeseCameraDeviceMonitor documentation
  - Make CheeseFlash a GtkWindow rather than a GObject
    Additionally, add further gtk-doc-like comments to the flash
    implementation.
  - Comment Vala methods with Valadoc markup
    Add basic documentation to all methods in Vala sources.
  - Add hotplug support to preferences dialog
    Adding and removing camera devices in the CheeseCamera is now propagated
    to the preferences dialog UI. Partially fixes bug 603612.
  - Correct default brightness in the schema to zero
  - Improve GSettings schema text and include ranges
  - Also use the countdown duration for burst mode
  - Add a countdown-duration key to GSettings schema
    Add a new GSettings key to allow configuration of the duration of the
    countdown when taking a photo. Partially fixes bug 594267.
  - Bump required Vala version to 0.13.2
    Required for Clutter.TableLayout in clutter-1.0.vapi, which was added
    when Vala switched to use GIR files.
  - Use STYLE_PROVIDER_PRIORITY_USER
  - Use Vala ‘as’ operator where possible
    Use the as operator when fetching widgets from GtkBuilder files, to do a
    runtime type-check.
  - Include the version in the man page
  - Add generated man page to CLEANFILES
  - Fix a typo so that the man page is generated
  - Fix gtk-doc checks when srcdir != builddir
  - Add man page, generated with xsltproc
  - Add help button to the preferences dialog
  - Improve documentation to pass gtk-doc tests
    Add the deprecated API index to the documentation. Complete the rename
    of cheese_camera_set_device_by_dev_file() to
    cheese_camera_set_device_by_device_node(). Add missing documentation to
    reach 100% symbol coverage.
  - Enable gtk-doc tests during make check
  - Check for GStreamer plugins required at runtime
    Add a GStreamer plugin check to configure.ac, which checks for
    individual plugins with gst-inspect, rather than relying on the plugins
    being provided by checking for GStreamer pkg-config files. The check is
    non-fatal, as the plugins are not build-time dependencies.
  - Bump pkg-config requirement to 0.24
    Version 0.24 or greater of pkg-config is required in order to avoid the
    duplicate AC_SUBST macro calls for PKG_CHECK_MODULES substitutions.
  - Remove unused FULL_LIBEXECDIR from configure.ac
  - Add private pointers to libcheese GObject structs
    Speed up access to the private struct of the GObject by adding a
    pointer, so that *_GET_PRIVATE does not have to called each time. Create
    a typedef for the private structures in the headers, and hide the
    structs from the documentation by placing them inside a private
    subsection.
  - Add basic documentation for remaining public API
    Add cheese-widget-private.h back to files ignored by gtk-doc. Add basic
    documentation for the remainder of the public API. Use UUID instead of
    ID or UDI. Add blurb and nick to all documented properties. Add
    CheeseVideoFormat documentation. Use unsigned integers where the values
    are always positive. Sprinkle some const qualifiers. Add some filename
    GObject Introspection annotations.
  - Update TODO
  - Fix several compiler warnings
    Add some missing prototypes, correct some pointer type mismatches, return
    a value from functions that returns values and improve GError handling.
  - Use gnome-common compiler warnings
    Additionally, enable silent Automake rules by default so that warnings are
    more visible.
  - Add more classes to gtk-doc documentation
    Add basic documentation for CheeseCamera, CheeseFileUtil and CheeseFlash
    classes. Split the API reference into libcheese and libcheese-gtk
    chapters.
  - Add CheeseCameraDeviceMonitor::removed callback
    Added CheeseCameraDeviceMonitor::removed signal callback function in
    CheeseCamera. Fixes bug 662852.
  - Improved CheeseCameraDeviceMonitor::added signal
    CheeseCameraDeviceMonitor:added has now a CheeseCameraDevice argument.
    CheeseCameraDeviceMonitor is also now a member of CheeseCamera.
  - Add a long description to the DOAP file
  - help: fixed another typo
  - help: moving introduction page back to .page
  - help: fixed typo in Makefile.am
  - help: updated Makefile.am
  - Overhaul the libcheese documentation
    Add documentation for CheeseCameraDevice. Remove bogus XML included in
    the library overview. Add section documentation to all classes, and mark
    them as unstable. Add GObject and GObjectClass struct documentation.
  - help: renamed pages and rearranged sections
    Moved all pages, except introduction.page, into sections to make index
    look nicer.
  - Use license-type in the about dialog
  - Connect thumbnail nav button signals
    The thumb nav widget crashed when clicking the buttons to scroll the
    thumbnail view. This was caused by connecting to the wrong signals:
    ‘button-pressed-event’ and ‘button-released-event’, rather than
    ‘pressed’ and ‘released’. There was also some duplicate code for
    creating the left button, which led to a GtkButton being leaked when
    the thumb nav was created. Fixes bug 660686.
  - Remove obsolete MAINTAINERS file
    http://live.gnome.org/Git/FAQ#How_do_I_add_a_description_to_the_git_web_view.3F__What_is_this_.22blah.doap.22.3F
  - Remove obsolote cicl script
  - Increase the photo count in burst mode to 100000
    Fixes bug 659977
  - Use an idle handler to generate thumbnails
    A thread was used for generating thumbnails for CheeseThumbView, but
    this had problems with concurrent access to the GtkListStore which
    backs the thumb view, as in bug 648936. A simpler approach is to use an
    idle handler, which avoids the need for acquiring the GDK lock.
  - Restore gudev checks during configure
  - Added/Updated Translations
    - be, courtesy of Yuri Matsuk
    - de, courtesy of Mario Blättermann
    - es, courtesy of Daniel Mustieles
    - et, courtesy of Mattias Põldaru
    - gl, courtesy of Fran Dieguez
    - he, courtesy of Yaron Shahrabani
    - lt, courtesy of Aurimas Černius
    - nb, courtesy of Kjartan Maraas
    - sv, courtesy of Daniel Nylander
    - tr, courtesy of Muhammet Kara
    - xh, courtesy of Andiswa Mvanyashe
  - Added/Updated Documentation
    - es, courtesy of Daniel Mustieles

version 3.3.1
  - configure.ac: Bump cheese version to 3.3.1
  - Update .gitignore
    Additionally, remove INSTALL, as it is created during autoreconf.
  - Work around an error during uninstall of distcheck
  - Convert src subdirectory to build non-recursively
  - Convert documentation to build non-recursively
  - Make data directory build non-recursively
    Additionally, make the GSettings schema translatable.
  - Convert tests to build non-recursively
  - Convert libcheese to build non-recursively
  - Update toplevel Makefile.am to more modern style
  - Update configure.ac to more modern style
  - Make preferences dialog layout HIG-compliant
    The layout of the preferences dialog was ported to a new one that
    conforms to the HIG and is also based on GtkGrid containers. Fixes bug
    661651.
  - Prefer a dark GTK+ theme, bug 660628
  - Do not crash if gnome-video-effects is not present
    Also, print a warning using warning(). Fixes bug 654671.
  - Add David King as a maintainer
  - Do not call _init() functions inside CheeseWidget
    GObject construction cannot fail, which is incompatible with calling
    _init() functions which can fail inside a constructor. Users of
    CheeseWidget must instead initialise the relevant toolkits (Clutter-GTK+
    and Gst-Clutter) themselves, and gracefully fail before
    cheese_widget_new() is called. Fixes the remainder of bug 654913 and
    also bug 660400.
  - Updated French doc translation
  - Added/Updated Translations
    - be, courtesy of Yuri Matsuk
    - el, courtesy of Giannis Katsampirhs
    - es, courtesy of Jorge González
    - nb, courtesy of Kjartan Maraas
    - tr, courtesy of Muhammet Kara
  - Added/Updated Documentation
    - fr, courtesy of Bruno Brouard
    - hu, courtesy of Gabor Kelemen

version 3.2.0
  - configure.ac: Bump Cheese version to 3.2.0
  - Added/Updated Translations
    - as, courtesy of Nilamdyuti Goswami
    - gl, courtesy of Leandro Regueiro
    - or, courtesy of Manoj Kumar Giri
  - Added/Updated Documentation
    - de, courtesy of Mario Blättermann
    - es, courtesy of Daniel Mustieles
    - gl, courtesy of Leandro Regueiro

version 3.1.92
  - configure.ac: Bump Cheese version to 3.1.92
  - help: fixed countdown and flash help, bug 659013
  - help: reviewed and improved wording
  - Fixed one string
  - Updated Spanish translation
  - Refresh icons, bug 646770
  - Remove unnecessary clutter-tablelayout.vapi
    Fixes bug 657029.
  - Distribute .vapi files, bug 652870
  - Translate the command-line summary, bug 636585
  - Check return value of gtk_clutter_init()
    Fixes bug 654913.
  - Fix invalid burst mode delay time, bug 652532
  - Remove gettext macros in configure.ac, bug 655166
  - Added/Updated Translations
    - ar, courtesy of Anass Ahmed
    - be, courtesy of Ihar Hrachyshka
    - es, courtesy of Jorge González
  - Added/Updated Documentation
    - de, courtesy of Mario Blättermann
    - es, courtesy of Jorge González
    - gl, courtesy of Fran Dieguez

version 3.1.91.1
  - configure.ac: Bump version to 3.1.91.1 release
    Bump SONAME of libcheese and libcheese-gtk to be greater than those from
    3.0.2.
    Fixes https://bugzilla.gnome.org/show_bug.cgi?id=658342
  - Added/Updated Documentation
    - es, courtesy of Jorge González

version 3.1.91
  - Fix cheese_effect_load_effects prototype
  - help: Reviewed and improved new Mallard help
  - help: Added Mallard help, removed DocBook help
  - cheese-effects: implement loading cheese effects in libcheese
  - cheese-camera: fix 2 gst object reference leaks
  - cheese-camera: fix 3 string memory leaks
  - about: Update credits according to AUTHORS file
  - cheese-camera: Print debug of messages
  - thumb-view: start monitoring at startup
    Before this we started monitoring each for each photo/video
    capture. That was a bit inefficient as the directories in which photos
    and videos are saved are known and don't change during the program's
    lifetime.
    Now we start the monitoring at startup only once.
  - cheese-camera: make effect previews scale with the cheese window
    Before this patch, when you scaled Cheese's main window, in the the
    effects preview mode, the window would scale but the 9 videos inside
    the window would remain at the same size.
    I had to remove the fixed scaling from the effects pipeline and let
    the size of the textures be governed by the layout manager.
    Now when you scale the Cheese effect preview window all 9 videos are
    automatically scaled (keeping aspect-ratio) to fill the available space.
  - libcheese: aligned button to center
  - add gio-2.0 and x11 to PKG_CHECK_MODULES
  - cheese-gtk.pc: Update 'requires private' to gtk3
  - window: use the right signature for button-release-event callback
    The signature is (ClutterActor, ClutterEvent). Using the event source
    there is wrong, as that's not guaranteed to be the same object emitting
    the callback (i.e. the object emitting could be just forwarding an event
    coming from one of its children).
    https://bugzilla.gnome.org/show_bug.cgi?id=647677
  - libcheese: don't leak the source element
  - Updated Telugu Translations done by Praveen Illa
  - Updated Telugu translations done by Praveen Illa
  - cheese-camera: Setting camera to playing after forced stop
  - cheese-camera: Emit signal when video is saved
  - .gitignore: Added new test executables
  - cheese-test-flash: Quit when window is closed
  - cheese-thumb-view: guard thread unsafe operations
  - ui: handle "delete-event" signal at Preferences dialog, fixes bug #647229
    the "close" event triggered by the escape key was destroyng the dialog, so
    when the user tried to open the Preferences dialog again what appeared was
    an empty/tiny window. Handle the "delete-event" connecting it with
    hide_on_delete() solved the problem.
  - lib: fix leaks and simplify cheese_fileutil_get_new_media_filename
  - lib: properly prefix photo/video suffix constants in cheese namespace
  - lib: move glib-object.h before G_BEGIN_DECLS in cheese-fileutil.h
    Fixes a build warning about implicit declaration.
  - lib: return const char * when getting photo/video paths
    Update all uses of both methods accordingly.
  - lib: no need to declare variable to retun photo/video paths
  - lib: add some missing introspection annotations in cheese-camera
  - set default value for saturation to 1, fixes bug #647228
  - Added/Updated Translations
    - ca@valencia, courtesy of Gil Forcada
    - eo, courtesy of Kristjan SCHMIDT
    - fa, courtesy of Arash Mousavi
    - fi, courtesy of Tommi Vainikainen
    - nl, courtesy of Wouter Bolsterlee
    - te, courtesy of Praveen Illa
    - tr, courtesy of Muhammet Kara
    - ug, courtesy of Sahran
    - zu, courtesy of Priscilla Mahlangu
  - Added/Updated Documentation
    - ko, courtesy of Seong-ho, Cho

version 3.0.0
  - lib: fix typo when initializing photo_path private attribute.
  - lib: export correct package on introspection files.
    The name of Cheese's pkg is cheese, not cheese-3.0.
  - lib: fix recording videos after previous image/video captures.
    This fixes bug: https://bugzilla.gnome.org/show_bug.cgi?id=645975
  - window: set the about dialog transient and modal so that mutter can apply
    the GNOME 3 modal dialog effect to it.
    Fixes bug: https://bugzilla.gnome.org/show_bug.cgi?id=646007
  - Added/Updated Translations
    - ca, courtesy of Gil Forcada
    - da, courtesy of Anders Jenbo
    - en_GB, courtesy of Bruce Cowan
    - eu, courtesy of Julen Ruiz Aizpuru
    - gu, courtesy of Sweta Kothari
    - he, courtesy of Yaron Shahrabani
    - id, courtesy of Dirgita
    - it, courtesy of Alessandro Falappa
    - lt, courtesy of Gintautas Miliauskas
    - pa, courtesy of A S Alam
    - pt_BR, courtesy of Rodrigo Padula de Oliveira
    - sr, courtesy of Мирослав Николић
    - sr@latin, courtesy of Miroslav Nikolić
    - ta, courtesy of Dr.T.Vasudevan
    - th, courtesy of Akom Chotiphantawanon
    - tr, courtesy of Baris Cicek
    - ug, courtesy of Sahran
    - vi, courtesy of Clytie Siddall
  - Added/Updated Documentation

version 2.91.93:
   - Cheese widget bug fixes
   - Make Flash widget not cover the GNOME Shell panel
   - Loads of updated translations

version 2.91.92
  - Makefile.am: Add autogen.sh to extra_dist
  - tests: Add test program for the flash object
  - lib: Don't forget to call gtk_clutter_init()
    Note that using this in an application that relies on keyboard
    input for GtkClutter widgets will fail horribly.
  - lib: Make cheese-widget work again
  - Fix default value for the dconf contrast
  - Restore and fix menu mnemonics and entries
  - Added/Updated Translations
    - ca, courtesy of Gil Forcada
    - cs, courtesy of Marek Černocký
    - de, courtesy of Mario Blättermann
    - es, courtesy of Daniel Mustieles
    - et, courtesy of Ivar Smolin
    - fr, courtesy of Claude Paroz
    - gl, courtesy of "Last-Translator: \n"
    - hu, courtesy of Gabor Kelemen
    - kn, courtesy of Shankar Prasad
    - ko, courtesy of Changwoo Ryu
    - lt, courtesy of Rimas Kudelis
    - lv, courtesy of Rudolfs
    - nb, courtesy of Kjartan Maraas
    - pl, courtesy of Piotr Drąg
    - pt_BR, courtesy of Flamarion Jorge
    - pt, courtesy of Duarte Loreto
    - ro, courtesy of Lucian Adrian Grijincu
    - sk, courtesy of Miroslav Biňas
    - sl, courtesy of Matej Urbančič
    - sv, courtesy of Daniel Nylander
    - uk, courtesy of Korostil Daniel
    - zh_CN, courtesy of chiachen
  - Added/Updated Documentation
    - sv, courtesy of Henrik Löwendahl

version 2.91.91.1
  - Drop version to 2.91.91.1
    The tarball release of 2.91.91 was generated with a tarball release of
    Vala that was affected by bug 642885. This is a point release, that
    contains a workaround for that bug until a new Vala release (0.11.7) is
    out.

  - Correct some configure requirements

version 2.91.91
  - use camerabin for taking photos and videos
  - Migrated from libunique to GtkApplication
  - Ported to GTK+ 3.x
  - build: Update autotools configuration
  - cheese-camera: Unsetting preview-caps after photo
    After taking a photo to pixbuf, we set preview-caps to NULL so regular
    photo doesn't send the preview message.
  - cheese-camera: Fixing take_photo_pixbuf
    Method cheese_camera_take_photo_pixbuf was not working. Now it is
    implemented using camerabin's features. We set preview-caps in camerabin
    and get the buffer for the photo via message on the bus.
    Signals are now only emitted if the capture was successful.
  - cheese-camera: Set video recording options
    Set encoding and multiplexing options.
  - svg overlay effects can now be added
  - cheese-camera: Set filter-caps property
    Set filter-caps property to avoid camerabin default of video/x-raw-yuv
    format=(fourcc)I420.
  - cheese-camera: Enabling source color conversion
    Setting the flag to enable color conversion on video source. Flags names
    were also redefined to allow code readability.
  - cheese-camera: Setting resolution in camerabin
    Cheese was using a capsfilter after video source to configure the
    desired resolution for pictures and video. We now use the camerabin
    signal set-video-resolution-fps to set desired resolution.
  - cheese-camera: Removing height and width defaults
    Camerabin has video-capture defaults that can cause not-negotiated
    errors or set resolution to values that are not the requested by the
    user. Setting them to zero we allow the resolution to be negotiated.
  - cheese-camera: Creating a separate effects_preview_bin
    Create a effects_preview_bin that will hold all elements related to
    effects live preview. This bin is added to video_filter_bin, the same
    bin that contained those elements directly before.
  - cheese-camera: Use camerabin as pipeline base
    Changed Cheese-Camera to use camerabin as its base. Camerabin implements
    view-finder, image capture and video recording.
  - Add gobject introspection support to build system
  - configure.ac: Changing required versions
    Cheese works with older version of clutter, gtk, gdk and
    libgnomedesktop.
  - cheese-window: Fix vala syntax problem
    Cheese wasn't compiled by latest java because of this array
    construction. Changing it to a proper array we avoid the compiling
    problem. Fixes bug #639276.
  - Added/Updated Translations
    - af, courtesy of F Wolff
    - ar, courtesy of Khaled Hosny
    - ast, courtesy of ivarela
    - bn_IN, courtesy of "Last-Translator: \n"
    - ca, courtesy of Gil Forcada
    - en_GB, courtesy of Bruce Cowan
    - es, courtesy of Daniel Mustieles
    - fr, courtesy of Nicolas Repentin
    - hu, courtesy of Gabor Kelemen
    - ko, courtesy of Changwoo Ryu
    - lv, courtesy of Rudolfs
    - nb, courtesy of Kjartan Maraas
    - or, courtesy of Manoj Kumar Giri
    - pa, courtesy of A S Alam
    - pl, courtesy of Piotr Drąg
    - pt, courtesy of Duarte Loreto
    - ru, courtesy of Yuri Myaseodov
    - sl, courtesy of Matej Urbančič
    - sr, courtesy of Мирослав Николић
    - sr@latin, courtesy of Miroslav Nikolić
    - sv, courtesy of Daniel Nylander
    - ug, courtesy of Sahran
    - uk, courtesy of Korostil Daniel
    - zh_CN, courtesy of YunQiang Su
  - Added/Updated Documentation
    - es, courtesy of Jorge González

version 2.91.4
  - bump LT_VERSION numbers for libcheese and libcheese-gtk
  - Splitting dependencies of libcheese and libcheese-gtk
    Spliting dependencies of libcheese and libcheese-gtk and linking
    libcheese library with it's dependencies.
  - libcheese: Removing unnecessary includes
    Removing unnecessary includes of gtk in libcheese modules.
  - Creating pkgconfig file for libcheese and libcheese-gtk
  - Adding test for CheeseCamera
    cheese-test-camera creates a CheeseCamera and takes a photo that will be
    saved in testcamera.jpg after five seconds.
  - Creating libcheese, installable non-gtk lib
    Cheese-flash is now part of libcheese-gtk, since it depends on gtk and
    we want libcheese to not depend on it. Libcheesecommon is now called
    simply Libcheese and it's installed, it's the main cheese lib which can
    be used to set the pipeline, take_photos and record video.
  - remove countdown from libcheese
    cheese uses the new countdown in src/cheese-countdown.vala
    which prints the countdown directly on the clutter texture.
  - cheese-test-chooser: Use gtk_clutter_init
    Cheese test chooser should use gtk_clutter_init instead of gtk_init,
    since cheese-camera now uses a ClutterTexture to display video.
  - cheese-camera: using const char * when appropriate
    Filenames and other string parameters used to set properties can be
    const.
  - cheese-camera: switch_device is now a void method
    Method cheese_camera_switch_device always returned true. Its return
    value can be ignored.
  - cheese-camera: Making methods static
    Some methods are only used inside CheeseCamera, so I removed them from
    header file and declared them as static.
  - cheese-widget: Fix return type for get_settings
  - remove dbus support from cheese, fixes bug #622915
  - cheese-camera: Check return of linking effect
    Return if linking effect preview was not successful.
  - cheese-camera: Removing extra colorspace after effect
    Effects are already created using one colorspace before and one after
    its pipeline description, so there is no need to add another colorspace
    after the effect bin.
  - cheese-camera: Handle more bus messages
    When bus receives error or warning messages, we parse them and print
    warning messages.
  - Updated Basque language
  - Added/Updated Translations
    - bg, courtesy of Krasimir Chonov
    - cs, courtesy of Marek Černocký
    - el, courtesy of Kostas Papadimas
    - eo, courtesy of Kristjan SCHMIDT
    - eu, courtesy of Iñaki Larrañaga Murgoitio
    - fa, courtesy of Mahyar Moghimi
    - gl, courtesy of Fran Diéguez
    - nb, courtesy of Kjartan Maraas
    - ru, courtesy of Yuri Myasoedov
    - th, courtesy of Akom Chotiphantawanon
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao
  - Added/Updated Documentation

version 2.91.3

  - Photo and video resolution can be set separately. Fixes bug #582268
  - Fixed tooltip text for "stop action" and for "next/prev effect page"
    buttons
  - Start monitoring storage folders if they exist when cheese starts,
    and a fix for bug 637798 commit.
  - Burst mode session can be cancelled with a "Stop taking pictures"
    button. Fixes bug #637798
  - Button area does not get hidden after returning from fullscreen mode.
  - Start "Save as" dialog in home folder
  - Check if each Webcam directory exists before filling thumb view
  - Don't create Webcam dirs (in Pictures and Video user dirs) unless
    there is content to put on it, fixes bug #563058
  - Command line options for starting in wide and fullscreen modes,
    fixes bug #597820
  - All ui buttons now have tooltips, fixes bug #622974
  - allow multiple items to be deleted at once
  - allow multiple items moved to trash at once
  - do a fade in animatin on each new effect page
  - calculate the dimension of the effect previews automatically
    this is done by getting the viewport dimension, subtracting
    the borders and then dividing by three. if there are less than
    9 effects on the last effects pane, we want to still start
    putting the previews in the upper left corner. in fullscreen
    we simply use the same size.
  - remove useless comments
  - align the effects in the center, regardless of window size
  - sort the effects in the effect preview alphabetically
  - set the effect panes preview to a fixed size
  - post release version bump
  - Added/Updated Translations
    - de, courtesy of Wolfgang Stoeggl
    - es, courtesy of Jorge González
    - et, courtesy of Ivar Smolin
    - gl, courtesy of Fran Diéguez
    - he, courtesy of Yaron Shahrabani
    - id, courtesy of Andika Triwidada
    - nb, courtesy of Kjartan Maraas
    - pa, courtesy of A S Alam
    - sl, courtesy of Matej Urbančič
    - sv, courtesy of Daniel Nylander
    - th, courtesy of Akom Chotiphantawanon
    - ug, courtesy of Sahran
    - vi, courtesy of Clytie Siddall
    - zh_CN, courtesy of Aron Xu
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao
  - Added/Updated Documentation

version 2.91.2
  - port cheese to gsettings
    this commit drops gconf entirely from cheese and uses
    gsettings. glib and gio dependency was bumped to 2.26.0
  - Increased upper bound for number of photos taken in burst mode and time
    interval between photos taken in burst mode
  - Removed mx dependency. Bumped minimum clutter version to 1.4.0
  - test-widget: Using gtk_clutter_init
    The test cheese-test-widget was using gtk_init instead of
    gtk_clutter_init, displaying the error "Unable to create a new stage".
  - widget: Using ClutterTexture instead of DrawingArea
    The method cheese_camera_new expects a ClutterTexture, but the widget
    was trying to use a GtkDrawingArea. It now has a GtkClutterEmbed widget
    that contains a ClutterTexture that will be used by cheese_camera_new.
  - camera: emit video-saved signal by name in gst threads
    Static camera_signals array is not initizialized in the gstreamer thread
    so we get a critical assertion failed (signal_id > 0) if we emit by id.
    This should workaround the issue #620637
  - Mapped the Escape key to either stop a current action or to take you out of
    the effects selector or fullscreen
  - main: properly start GtkClutter to avoid a runtime warning
    Initializing GtkClutter instead of gtk and clutter separately
    prevents this:
    ClutterGLX-CRITICAL **: Unable to make the stage window 0x4600035 the current GLX drawable
  - Fixed bug where you can start multiple countdowns in photo mode that
    run together and mess up the counter
  - json: fix a boolean property defined as a string
    Fixes a g_value_copy incompatible types critical warning at runtime
  - configure: Use cheese instead of Cheese
    This way the .ui files are installed in /usr/shared/cheese
    as expected, instead of /usr/shared/Cheese, fixes bug #626697
  - check if vala is available, fail if not, partially fixes #626697
  - bump vala requirement to 0.9.2 and use the new syntax for gtk stock items
    in vala 0.10
  - add identity effect manually at the first position of the effect list
  - remove --verbose command line flag, log handler and bugreport script
    as most of the debug output is done with GST_* or with
    debug() and message(), the log file is useless and therefore
    the bugreport script which is collection that file too.
  - show the version with the -v/--version command line flag
  - check if device uri is null, before setting up the camera with it
  - add a command line option to specify camera file, fixes bug #614778
    the -d or --device option was added to specify a different
    device file. if the device file does not exist, or is not a
    valid v4l/v4l2 device it will be silently ignored
  - bump libcanberra version requirement to 0.23
  - play a sound when taking a photo
    this was somehow not added when we did the vala port, now
    everybody can enjoy that lovely shutter sound
  - parse our custom gtkrc file to hide the thumbview arrows
  - Killed several memory leaks
  - Fixed some runtime warnings
  - Camera related actions are now disabled until the pipeline is playing
  - Show error dialogs when any of the file operations fail
  - Made app crash early if the GTKBUilder UI files are not found
  - get rid of eog thumbnail
    removed eog thumbnail and added cheese thumbnail, which
    uses the best things from nautilus and eog.
  - Display 'No effects found' message if no effects were found.
  - Removed most unneccessary warnings when compiling src/*
    Warnings that remain point to real problems that should be handled
  - Errors in effect files no longer fatal
  - Partially removed warnings that appeared during effect switching
  - use the correct protocol in licence dialog, fixes bug #610207
    as the original text of the link began with &lt;http://...
    this was seen as the protocol, however the protocol is just
    http://
  - Split UI setup into UI Setup and camera setup. Shows Window as soon
    as UI is setup.
    Slightly faster time-to-window-visible
  - ignore effects, if they are already loaded
    if an effect is already loaded, cheese ignores the effect
    and does not add it to the ui. this is done by comparing the
    gstreamer pipeline
  - load effects from ~/.local/share/gnome-video-effects/
    xdg user_data_dir defaults to ~/.local/share/gnome-video-effects,
    so we are looking into that place for user effects
  - Effect preview elements are now constructed on-demand, rather than
    at startup.
  - remove the effect files from cheese from now on and add gnome-video-effects
    as a dependency. effects are brought to the users home by the package
    gnome-video-effects (http://git.gnome.org/browse/gnome-video-effects).
    this way, many applications, like Pitivi or Empathy are able to use the
    same effects as we do. however, we will not depend on it, as it is an
    optional package and not needed to run.

    cheese looks for a directory named gnome-video-effects in one of the system
    share directories proposed by XDG (mostly /usr/share/ or /usr/local/share/).

    it also looks if the user has a directory named ~/.gnome-video-effects. we
    probably should change that and use the XDG standard for user shared files,
    which is ~/.local/share/
  - Removed a few unnecessary camera start/stops during startup
  - Do not create a device if gst initializazion fails
    Currently we create a device with empty caps if the probing pipeline
    cannot be started. That's wrong, the device evidendtly doesn't work so
    the CheeseCameraDevice object for doesn't have to be created. Fixes bug #618203
  - Added/Updated Translations
    - ar, courtesy of Khaled Hosny
    - bg, courtesy of Krasimir Chonov
    - ca, courtesy of Gil Forcada
    - ca@valencia, courtesy of Gil Forcada
    - cs, courtesy of Marek Černocký
    - da, courtesy of Anders Jenbo
    - de, courtesy of Mario Blättermann
    - el, courtesy of Michael Kotsarinis
    - en_GB, courtesy of Philip Withnall
    - es, courtesy of Jorge González
    - et, courtesy of Ivar Smolin
    - eu, courtesy of Iñaki Larrañaga Murgoitio
    - fr, courtesy of Pablo Martin-Gomez
    - gl, courtesy of Fran Diéguez
    - he, courtesy of Yaron Shahrabani
    - hi, courtesy of Rajesh Ranjan
    - hu, courtesy of Gabor Kelemen
    - id, courtesy of Dirgita
    - it, courtesy of Alessandro Falappa
    - ja, courtesy of Takayuki KUSANO
    - kk, courtesy of Baurzhan Muftakhidinov
    - kn, courtesy of Shankar Prasad
    - lt, courtesy of Rimas Kudelis
    - nb, courtesy of Kjartan Maraas
    - nl, courtesy of Reinout van Schouwen
    - nn, courtesy of Torstein Adolf Winterseth
    - or, courtesy of Manoj Kumar Giri
    - pa, courtesy of A S Alam
    - pl, courtesy of Tomasz Dominikowski
    - pt, courtesy of Duarte Loreto
    - ro, courtesy of Lucian Adrian Grijincu
    - ru, courtesy of Yuri Myasoedov
    - sk, courtesy of Miroslav Biňas
    - sl, courtesy of Matej Urbančič
    - sr, courtesy of Милош Поповић
    - sr@latin, courtesy of Miloš Popović
    - sv, courtesy of Daniel Nylander
    - ta, courtesy of Dr.T.Vasudevan
    - te, courtesy of Krishna Babu K
    - th, courtesy of Akom Chotiphantawanon
    - ug, courtesy of Sahran
    - zh_CN, courtesy of Aron Xu
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao
  - Added/Updated Documentation
    - cs, courtesy of Lucas Lommer
    - zh_CN, courtesy of YunQiang Su

version 2.31.1
  - the ui was rewritten using vala and clutter
  - using live previews for all effects
  - added user configurable effects, which can be installed in the system.
    furthermore we added a specification for those files, to be usable
    everywhere in GNOME.
  - more number of effects
  - broke most parts of libcheese
  - Added/Updated Translations
    - en@shaw, courtesy of Thomas Thurman
    - fi, courtesy of Tommi Vainikainen
    - gl, courtesy of Fran Diéguez
    - he, courtesy of Yaron Shahrabani
    - ka, courtesy of Vladimer Sichinava
    - sl, courtesy of Matej Urbančič
    - th, courtesy of Theppitak Karoonboonyanan
    - zh_CN, courtesy of Aron Xu
  - Added/Updated Documentation
    - ca, courtesy of Carles Ferrando Garcia
    - fi, courtesy of Jukka Heikkilä
    - pa, courtesy of A S Alam
    - sl, courtesy of Andrej Žnidaršič

version 2.30.1
  - menu: disable Take Photo when there is no camera.
    Fixes bug 615002, courtesy of Yuvaraj Pandian
  - effects: fix a text rendering problem.
    Fixes bug 613287, courtesy of Mathias Clasen
  - build: enable GSEAL
  - all: use accessor functions instead direct access.
    Fixes bug 585210, courtesy of Javier Jardon.
  - Added/Updated Translations
    - ast, courtesy of Xandru Armesto
    - bn_IN, courtesy of Runa Bhattacharjee
    - ca@valencia, courtesy of Gil Forcada
    - id, courtesy of Andika Triwidada
    - ja, courtesy of Hideki Yamane (Debian-JP)
    - kn, courtesy of Shankar Prasad
    - ms, courtesy of Umarzuki Bin Mochlis Moktar
    - th, courtesy of Theppitak Karoonboonyanan
  - Added/Updated Documentation

version 2.30.0
  - countdown: move rsvg_init and rsvg_term into main
    Initialize rsvg at startup and clean it up at exit.
    Fixes a long standing bug that made cheese crash when going fullscreen
    with button and window sounds enabled. Fixes bug #592100.
  - window: set the main button label to "Stop recording" while recording.
    Little regression introduced in 2.29.90. Fixes bug #613421
  - widget: use dialog-error icon
    The "error" icon used before doesn't exist in gnome-icon-theme 2.29 and
    causes crashes. Use "dialog-error" instead. Fixes #613067
  - Added/Updated Translations
    - bn, courtesy of Sadia Afroz
    - cs, courtesy of Petr Kovar
    - da, courtesy of Anders Jenbo
    - eu, courtesy of Iñaki Larrañaga Murgoitio
    - gu, courtesy of Sweta Kothari
    - it, courtesy of Alessandro Falappa
    - ko, courtesy of Changwoo Ryu
    - lt, courtesy of Žygimantas Beručka
    - lv, courtesy of Peteris Krisjanis
    - nn, courtesy of Torstein Adolf Winterseth
    - pa, courtesy of A S Alam
    - sr, courtesy of Бранко Кокановић
    - sr@latin, courtesy of Branko Kokanović
    - uk, courtesy of Maxim V. Dziumanenko
  - Added/Updated Documentation
    - cs, courtesy of Lucas Lommer
    - el, courtesy of Marios Zindilis

version 2.29.92
  - widget: restore saved balance settings at startup
    Restore balance (brightness, saturation, hue) settings, saved in gconf,
    when the camera is initialized. Fixes bug 610823.
  - camera: fix a shameful pointless g_return_if_fail that prevented
    resolution changin from preferences.
  - docs: complete api docs for CheeseCameraDeviceMonitor
  - Added/Updated Translations
    - ca, courtesy of Gil Forcada
    - el, courtesy of Kostas Papadimas
    - en_GB, courtesy of Bruce Cowan
    - eu, courtesy of Iñaki Larrañaga Murgoitio
    - fi, courtesy of Tommi Vainikainen
    - hu, courtesy of Gabor Kelemen
    - nb, courtesy of Kjartan Maraas
    - pt, courtesy of Duarte Loreto

version 2.29.91
  * cheese:
    - Restore the infobar temporarily disabled in the previous version
    - Make the infobar display generic errors about camera
      initialization instead of just the "no-device" one.

  * libcheese-gtk:
    - Remove "ready" and "error" signals in CheeseWidget and use a
      "state" property to track current widget state (none, ready,
      error).
    - Add cheese_widget_get_error() api to retrieve a GError (propagated
      from CheeseCamera) if something failed (widget in error state).
    - Update CheeseAvatarChooser to reflect the new api.

  * Fixed bugs:
      #592663 — Update sensitivity of "move all to trash", Mathias Clasen

  * Added/Updated Translations
    - de, courtesy of Wolfgang Stoeggl
    - gl, courtesy of Fran Diéguez
    - ja, courtesy of Hideki Yamane (Debian-JP)
    - pl, courtesy of Piotr Drąg
    - ro, courtesy of Adi Roiban
    - ru, courtesy of Alexander Saprykin
    - sv, courtesy of Daniel Nylander
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao

version 2.29.90

  * Export libcheese-gtk library
  * Rework Cheese itself to use libcheese-gtk
  * Add cropping ability to the chooser widget
  * Fix a possible crasher and a hang in CheeseCamera
  * Require libgudev on Linux systems
  * Limit framerate to 30 frames per second

  * Updated German documentation

version 2.29.5

  A slightly different format for these release notes.
  We missed a couple of releases in the 2.29 cycle and the big changes
  cheese went through meanwhile deserves something better than a cold
  list of commit messages.
  Big thanks go to Bastien Nocera who took up most longstanding items
  in our TODO list and implemented them right away.
  So let's see what happened since 2.28. Note that most of the following
  stuff is still a work in progress so don't expect everything listed to
  be completed.

  * Completely dropped HAL dependency
    Port most HAL code for v4l capability probing into udev and use
    gudev in cheese to take advantage of it.
    Add infrastructure (CheeseCameraDeviceMonitor) for dynamic
    device hotplugging (UI yet to come).
    Add optional udev dependency and provide a simple entry point
    for non linux platforms that will want to use their custom
    detection code (still waiting for patches).

  * First steps in splitting cheese code into two libraries
    - libcheese-common
      Will provide basic non UI related cheese functions: basically,
      device detection, device monitoring, video format handling.
    - libcheese-gtk
      A set of widgets that will allow third party application to
      include parts of cheese functionality (e.g. the avatar chooser
      will soon embed a viewfinder for quickly shooting a nice
      buddy icon). Ideally cheese will be soon based on this set of
      widgets being the first user of our own library.

  * Rework most of device capability handling code
    Rewrite caps detection code trying to use gstreamer api instead of
    our own custom stuff whenever possible.
    Remove framerate retrieving code since we didn't use it since a
    couple of releases.

  * Make startup slightly faster
    Probe device capabilities in PAUSED state instead of PLAYING.
    This was actually a workaround for a now fixed gstreamer bug (See
    #587082).
    Just a two line change but cheese is notably faster now!

  * Cosmetic changes
    Remove all the fake webcam code and use a still error image when
    no webcam is available.
    Drop EphySpinner in favor of the new GtkSpinner. Invert colors to
    make it sexier.
    Remove actions (SendTo stuff) from the contextual menu. It wasn't
    exactly the best way to interoperate with the desktop. And most of
    them worked suboptimally anyway.

  * Move to GST_DEBUG (first steps, probably needs work)
    We use gstreamer anyway, why not to take full advantage of it?
    Gstreamer debug infrastructure is really cool and surely a lot
    better than our previous g_prints.

  * Fixed bugs
    #598902 — Make flash window a popup
    #594966 — Drop HAL
    #603595 — Add a photo-taken signal, which passes a pixbuf
    #522199 — First pass at webcam widget for use in other applications
    #598445 — Use GtkSpinner instead of our own
    #603152 — Use libcanberra instead of GStreamer for shutter
    #603161 — Make CheeseGConf a singleton object
    #603162 — Make CheeseFileUtil a singleton
    #603167 — Avoid warnings on exit when playback hasn't started
    #595005 — Use a custom filename to group burst mode pictures
    #596535 — String fixes

  * Added/Updated Translations
    - en_GB, courtesy of Philip Withnall
    - en@shaw, courtesy of Thomas Thurman
    - es, courtesy of Jorge González
    - et, courtesy of Ivar Smolin
    - gl, courtesy of a
    - he, courtesy of Yaron Shahrabani
    - lt, courtesy of Gintautas Miliauskas
    - lv, courtesy of Rūdolfs Mazurs
    - nb, courtesy of Kjartan Maraas
    - nds, courtesy of Nils-Christoph Fiedler
    - pa, courtesy of A S Alam
    - ru, courtesy of Alexandre Prokoudine
    - sl, courtesy of Matej Urbančič
    - sv, courtesy of Daniel Nylander
    - ta, courtesy of Dr.T.Vasudevan
    - th, courtesy of อาคม โชติพันธวานนท์
    - uk, courtesy of Maxim V. Dziumanenko
    - zh_CN, courtesy of Tao Wei
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao
  - Added/Updated Documentation
    - es, courtesy of Jorge González
    - zh_CN, courtesy of arccos (L.Q)

version 2.28.0

  - use _X-GNOME-FullName inside the .desktop file, fixes bug #590182
  - fix the abortion of burst mode with the escape key, fixes bug #595073
    burst mode can now be aborted with the Escape key, no matter if
    the countdown is active or not.
    when burst mode is running you could start it again with spacebar,
    this has been disabled during the burst session.
  - updated the dependencies
  - Added/Updated Translations
    - as, courtesy of Amitakhya Phukan
    - ca, courtesy of Gil Forcada
    - cs, courtesy of Lucas Lommer
    - da, courtesy of Kenneth Nielsen
    - de, courtesy of Mario Blättermann
    - el, courtesy of Kostas Papadimas
    - en_GB, courtesy of Bruce Cowan
    - es, courtesy of Jorge González
    - fr, courtesy of Claude Paroz
    - gl, courtesy of Antón Méixome
    - hi, courtesy of Rajesh Ranjan
    - it, courtesy of Alessandro Falappa
    - ja, courtesy of Takeshi AIHANA
    - lt, courtesy of Gintautas Miliauskas
    - mai, courtesy of Sangeeta Kumari
    - mr, courtesy of Sandeep Shedmake
    - oc, courtesy of Yannig Marchegay (Kokoyaya)
    - pa, courtesy of A S Alam
    - ro, courtesy of Adi Roiban
    - sl, courtesy of Matej Urbančič
    - te, courtesy of Krishna Babu K
    - uk, courtesy of Maxim V. Dziumanenko
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao
  - Added/Updated Documentation
    - ca, courtesy of Joan Duran
    - de, courtesy of Christian Kirbach
    - el, courtesy of Μάριος Ζηντίλης
    - en_GB, courtesy of Philip Withnall
    - es, courtesy of Jorge Gonzalez
    - fr, courtesy of Laurent Coudeur
    - it, courtesy of RITA BANDIERA
    - nl, courtesy of Sander Pientka
    - oc, courtesy of Yannig Marchegay (Kokoyaya)
    - pt_BR, courtesy of Leonardo Ferreira Fontenelle
    - ru, courtesy of Vasiliy Faronov
    - sv, courtesy of Daniel Nylander
    - th, courtesy of Theppitak Karoonboonyanan
    - zh_CN, courtesy of ccrecall

version 2.27.92
  - Added/Updated Translations
    - ar, courtesy of Khaled Hosny
    - bn, courtesy of Loba Yeasmeen
    - bn_IN, courtesy of Runa Bhattacharjee
    - fr, courtesy of Claude Paroz
    - gu, courtesy of Sweta Kothari
    - hu, courtesy of Gabor Kelemen
    - kn, courtesy of Shankar Prasad
    - ko, courtesy of Changwoo Ryu
    - ml, courtesy of "Last-Translator: \n"
    - or, courtesy of Manoj Kumar Giri
    - pt, courtesy of Duarte Loreto
    - pt_BR, courtesy of Djavan Fagundes
    - sr, courtesy of Бранко Кокановић
    - sr@latin, courtesy of Branko Kokanović
    - ta, courtesy of I. Felix
    - tr, courtesy of Baris Cicek
  - Added/Updated Documentation
    - el, courtesy of Μάριος Ζηντίλης

version 2.27.91
  - Restore default window size that was changed with the netbook-mode
    merge.
  - Prevent the thumbview to shrink down to nothing when there are no
    items. Keep track of current items number and set a size request when
    it reaches zero.
  - Remove a bunch of hacks used in wide-mode switching to keep the video
    area size constant. Do everything in a more proper, non hackish, way.
    Fixes window "flickering" when switching to Wide Mode.
  - Restore a <schema> keyword that got lost in the gconf schema, fixes
    bug #591389, courtesy of Koop Mast
  - Added/Updated Translations
    - af, courtesy of F Wolff
    - bg, courtesy of Alexander Shopov
    - es, courtesy of Jorge González
    - et, courtesy of Ivar Smolin
    - eu, courtesy of Iñaki Larrañaga Murgoitio
    - fi, courtesy of Tommi Vainikainen
    - ga, courtesy of Seán de Búrca
    - gl, courtesy of Antón Méixome
    - he, courtesy of Yaron Shahrabani
    - hi, courtesy of Rajesh Ranjan
    - nb, courtesy of Kjartan Maraas
    - or, courtesy of Manoj Kumar Giri
    - pl, courtesy of Piotr Drąg
    - sv, courtesy of Daniel Nylander
    - th, courtesy of Akom C.
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao

version 2.27.90
  - Drop HILDON mode. We used to have HILDON support once but it has
    been broken for several major releases now. Better no support than
    a partial and broken one.

  - Merge netbook-mode branch. Introduces a new horizontal mode that
    fits nicely in small screens where the vertical real estate is
    limited (like netbooks). Commits summary follows.
  - Enable wide mode at startup if enabled in gconf or if forced
    through -w/--wide command line option. Save wide mode
    state in a gconf key.
  - Prevent icon view to shrink down when empty.
  - Let the thumbview pick up its optimal size. Remove hard coded size
    constraints for the icon view so that it picks up the best size
    for the current children (i.e. centered items, even with no
    selection, with every thumbnail size). Remove also extra
    spacing between and around thumbnails.
  - Correctly update thumbnav button sensitiveness. Force an update on
    up and down button sensitiveness while switching mode.
  - Keep size of the video preview area while switching mode. This way
    the icon view moves from the bottom to the right side while the
    rest of the window remains still.
  - Add UI for dynamically switching to and from wide mode.
    Add a WideMode action that triggers widget reparenting and changes
    spacing the vertical mode.
  - Add a function that sets the ThumbNav in vertical mode reparenting
    widgets on the fly.
  - Add a vertical mode for the ThumbNav. Add up and down buttons and
    implement vertical scrolling logic.
  - Reparent the icon view into the right aligment. First experiment
    of an horizontal mode suited for netbooks.
  - Make room for a vertical icon view in the right side. Add an hbox
    and an alignment to contain the icon view in the yet to come
    netbook mode.

  - Set WARNING MessageType for the InfoBar.
    Warning is certainly more suited since the missing webcam is not a fatal
    error. Also, the red color for the error type is really ugly. This
    lovely orange is much better.
  - Remove *.glade files.
    It is not recommended to use gtk-builder-convert anymore but to use
    glade-3 directly on the .ui files
  - Insensitize buttons and actions while "bursting".
  - Take the first photo of a burst right after button press. Rework a
    little bit burst mode to allow this.
  - Add 256x256 Cheese icons, courtesy of Ulisse Perusin.
  - Add tooltips to the buttons. Now that toolbar buttons have no
    labels tooltips can be helpful to identify each button role.
  - Add burst mode settings to preferences dialog. Allow to configure
    amount of photos to take in a burst and delay between each one.
  - Remove icon-size attribute of button icons. All icons have now the
    same size and honour gtk theme settings.
  - Add the scalable version of the take photo and burst icons.
  - Add --version command line flag.

  - post release version bump
  - Added/Updated Translations
    - ast, courtesy of astur
    - ca@valencia, courtesy of Gil Forcada
    - de, courtesy of Michael Kanis
    - es, courtesy of Jorge González
    - et, courtesy of Ivar Smolin
    - eu, courtesy of Iñaki Larrañaga Murgoitio
    - fr, courtesy of Nicolas Repentin
    - ga, courtesy of Seán de Búrca
    - gl, courtesy of Antón Méixome
    - nb, courtesy of Kjartan Maraas
    - pl, courtesy of Tomasz Dominikowski
    - sv, courtesy of Daniel Nylander
    - ta, courtesy of Dr.T.Vasudevan
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao
  - Added/Updated Documentation
    - de, courtesy of Mario Blättermann
    - fr, courtesy of Laurent Coudeur

version 2.27.5
  - add new photo and burst icons, courtesy of Ulisse Perusin
  - remove the label of the photo and video modes
  - support taking a series of photos, fixes bug #581997
    this introduces the burst mode in cheese.
    the burst mode allows to take a series of photos
    with a configurable delay and number of photos
  - Make webcam and resolution settings not sensitive if just 1 option
    is available. If there are no options to choose, make the webcam and
    resolution combo box insensitive, fixes bug #588353
  - Added/Updated Translations
    - it, courtesy of Alessandro Falappa
    - ku, courtesy of Erdal Ronahi
    - pt_BR, courtesy of Djavan Fagundes
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao
  - Added/Updated Documentation
    - es, courtesy of Jorge González

version 2.27.4
  - bump gtk+ requirement to 2.17.3
  - ensure the drawing area has a native X11 window
    With the new client-side-window gtk+ widgets do not always have a
    native window anymore. We need an XID to give to GstXOverlay and embed
    video into the application. This temporarily works around the issue
    forcing a native window. Works around bug 588357
  - use the camera-web icon instead of camera-video
    we are using camera-web in the project logo/icon but camera-video for the
    UI. it is more appropriate to use the camera-web icon as it's a) less
    likely people will use camcorders with cheese b) there is bigger visual
    distinction between camera-photo and camera-web than camera-photo and
    camera-video.
  - manually expose the window if not PLAYING
    Draw a black background if the pipeline is starting up and the overlay
    is still not ready to expose the drawing area.
  - fix broken xoverlay management
    For some reason this went unnoticed for a long time. We were calling
    set_x_overlay right after setting PLAYING state (with no warranty that
    the state change succeeded nor that an overlay was really there). The
    only right way to do this is to wait for prepare-xwindow-id message. It
    worked until now just because we've been extremely lucky.
  - drop url and email handlers
    Drop url and email handlers used in the about dialog since gtk+ 2.17.2
    already provides that functionality built in.
  - drop GEditMessageArea in favor of GtkInfoBar
    Drop GEditMessageArea since it recently entered gtk+. Fixes bug #586545
  - use AM_SILENT_RULES if available, fixes bug #587581
  - Use accessor functions instead direct access, fixes bug #585210
  - remove markup from translatable strings
  - keybindings: add configure checks for needed X11 stuff
    Check for XF86keysym.h availability and add a configure option to
    disable Webcam Button listening. Copied from rhythmbox.
  - add little program to emit fake webcam button events
  - capture webcam buttons
    Listen to XF86Webcam keypresses to capture webcam buttons. Should
    work with every driver that correctly binds the input device to
    KEY_CAMERA events. Fixes bug #521551
  - remove padding from the take_picture button
    Use alignment xscale property instead of padding in the take_picture
    button. Doesn't fix but at least partly works around bug #573301 (the
    button can now grow up and fill the whole free space with no padding
    constraint).
  - sanitize main toolbar structure
    No real change, just some little restructuring of the glade toolbar
    definition to make it easier to hack on.
  - Added/Updated Translations
    - es, courtesy of Jorge González
    - et, courtesy of Ivar Smolin
    - fr, courtesy of Jonathan Ernst
    - he, courtesy of Yaron Shahrabani
    - uk, courtesy of Maxim V. Dziumanenko
  - Added/Updated Documentation
    - it, courtesy of Rita Bandiera

version 2.27.3
  - Set default resolution to the highest one with a non jerky (higher than
    15fps) framerate, fixes bug #585857
  - Lower max-delay and max-page-delay oggmux properties from 5 to 0.5
    seconds. Should prevent out of sync audio in recorded videos and
    hopefully fix bug #585761
  - Don't access effects string after free. This was causing the first effect
    stored in gconf to not be restored at startup, fixes bug 584186
  - Get rid of GtkAspectFrame, it doesn't really suit our needs, it hardcodes
    an aspect ratio that obviously cannot be valid for every format webcams
    support. Render the video directly to the drawing area with no external
    aspect ratio restriction. Eventually fixes bug #559188 since the
    aspectframe was adding some extra padding between the video and the window
    border.
  - Almost every available gstreamer videosink can display black bars around
    the video keeping its aspect ratio. Enable it if available.
    Black bars look a lot nicer than the grey color of the underlying
    gtkwindow displayed with the aspectframe.
  - Properly forward expose events to GstXOverlay.
  - Avoid ugly flickering on window resize. Let gstxoverlay take full control
    of the drawing area window. Prevent gtk from drawing the background and
    remove the flickering caused by its internal double buffering.
  - Remove initial black bars (at least for 4:3 webcams). Set a default window
    size that fits nicely the video aspect ratio so that black bars are not
    drawn until a manual resize.
  - Added/Updated Translations
    - ca, courtesy of Gil Forcada
    - nb, courtesy of Kjartan Maraas
    - sv, courtesy of Daniel Nylander
    - ta, courtesy of Dr.T.Vasudevan
  - Added/Updated Documentation
    - el, courtesy of Simos Xenitellis

version 2.27.2
  - Ignore new photo requests if we are still waiting for an "handoff" signal
    for the previous one, fixes bug #582902
  - Fix a couple of trivial memory leaks in the thumbnail generator code, fixes
    bug #578289
  - Don't return if "image-loading" icon is not found, we will have an empty
    pixbuf while the thumbnail thread is running but it is surely better than
    no thumbnail at all, fixes bug #582240
  - Added/Updated Translations
    - de, courtesy of Nathan-J. Hirschauer
    - es, courtesy of Jorge González
    - et, courtesy of Ivar Smolin
    - or, courtesy of Manoj Kumar Giri
    - pa, courtesy of A S Alam
    - th, courtesy of Akom C.
  - Added/Updated Documentation
    - el, courtesy of Simos Xenitellis

version 2.27.1
  - Improve preferences dialog making it more consistent with other GNOME
    applications.
  - Add support for brightness, contrast, saturation and hue adjustments,
    fixes bug #558970.
  - Replace deprecated gtk_action_connect_proxy calls with
    gtk_activatable_set_related_action, fixes bug #571383.
  - Bump gtk+ dependency to 2.16 (needed for gtk_scale_add_mark and
    gtk_activatable_set_related_action).
  - Archive old ChangeLog and autogenerate it on distribution from git log.
  - Added cheese.doap file
  - Added Filippo Argiolas to MAINTAINERS
  - added/updated translations
    - ar, courtesy of Khaled Hosny
    - be, courtesy of Ягор Кур'яновіч
    - es, courtesy of Jorge González
    - kn, courtesy of Shankar Prasad

version 2.26.0
  - Lock gdk mutex in photo-saved and video-saved callbacks Those signals are emitted
    within a gstreamer callback so outside the mainloop, hence the need for locking.
    This fixes the flash locking issue and also the one about the grey thumbview
    right after the flash, fixes bug #566098
  - added/updated translations
    - as, courtesy of Amitakhya Phukan
    - bn_IN, courtesy of Runa Bhattacharjee
    - ca, courtesy of Joan Duran
    - cs, courtesy of Lucas Lommer
    - de, courtesy of Mario Blättermann
    - el, courtesy of Jennie Petoumenou
    - fr, courtesy of Robert-André Mauchin
    - gl, courtesy of Suso Baleato
    - lt, courtesy of Vytautas Rėkus
    - or, courtesy of Manoj Kumar Giri
    - te, courtesy of Krishna Babu K
    - th, courtesy of Theppitak Karoonboonyanan

version 2.25.92
  - Remove g_error calls where the error is not supposed to abort execution.
    Replace them with more suited g_warnings, fixes bug #562179
  - Print cheese verbose messages even if log dir doesn't exist, fixes bug #573573
  - added/updated translations
    - ro, courtesy of Adi Roiban
    - sv, courtesy of Daniel Nylander

version 2.25.91
  - replace deprecated gtk symbols inside hildon code, fixes bug #571383, courtesy of Thomas Andersen
  - added/updated translations
    - es, courtesy of Jorge González
    - et, courtesy of Mattias Põldaru
    - ro, courtesy of Adi Roiban
    - vi, courtesy of Clytie Siddall
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao

version 2.25.90
  - fixed lack of period at the end of a few paragraphs in the documentation,
    adopted "screenshot" instead of "screen shot", fixes bug #566718, courtesy of Leonardo Ferreira Fontenelle
  - reverse icon view scroll buttons scroll direction for RTL locales, fixes bug #566197, courtesy of Yair Hershkovitz
  - added/updated translations
    - de, courtesy of Hendrik Richter
    - el, courtesy of Fotis Tsamis
    - es, courtesy of Jorge González
    - fr, courtesy of Claude Paroz
    - ko, courtesy of Changwoo Ryu
    - zh_CN, courtesy of 甘露(Gan Lu)

version 2.25.4
  - added/updated translations
    - be@latin, courtesy of Ihar Hrachyshka
    - lv, courtesy of Raivis Dejus
    - pt_BR, courtesy of Leonardo Ferreira Fontenelle

version 2.25.3
  - single includes fix, fixes bug #563537, courtesy of Pedro Fragoso
  - added/updated translations
    - pa, courtesy of Amanpreet Singh Alam

version 2.25.2
  - print vendor and product id while probing devices. provide some more device informations for easier bug triaging.
  - remove unnecesary include files, to meet GnomeGoal http://live.gnome.org/GnomeGoals/CleanupGTKIncludes
  - don't use random access glist methods when accessing a list sequentially
    and properly free list elements after use, fixes bug #560514 and #560347, courtesy of Giuseppe Fuggiano
  - Use gtk_show_uri to open files and xdg-open i.s.o. gnome-open
  - Use gtk_message_dialog_format_secondary_markup correctly
  - print the cheese version if the -v flag is set
  - add support for cams which support only one resolution, fixes bug #560032, courtesy of Hans de Goede
  - added/updated translations
    - es, courtesy of Jorge González
    - ku, courtesy of Erdal Ronahi

version 2.25.1
  - change the default font of the countdown widget to bitstream vera sans bold
  - drop libgnome/libgnome-vfs dependencies, fixes bug #556580, courtesy of Cosimo Cecchi
  - exit correctly with unknown command line arguments, fixes bug #556084.
  - change the ui behaviour of the fullscreen toolbar, to show always when in
    effects chooser mode, fixes bug #548546
  - added/updated translations
    - ca, courtesy of Gil Forcada
    - de, courtesy of Hendrik Richter
    - es, courtesy of Jorge González
    - fr, courtesy of Robert-André Mauchin
    - he, courtesy of Mark Krapivner
    - nb, courtesy of Kjartan Maraas
    - nl, courtesy of Wouter Bolsterlee
    - pt_BR, courtesy of Vladimir Melo
    - sr, courtesy of Горан Ракић
    - sr@latin, courtesy of Goran Rakić
    - th, courtesy of Theppitak Karoonboonyanan
    - uk, courtesy of Maxim V. Dziumanenko

version 2.24.0
  - correct an error in the help file, which prevented the document to be valid
  - update the cheese dependencies, fixes bug #547203
  - use the correct translated plural form when deleting more than one item from
    the thumbnail bar, fixes bug #552290, courtesy of Yuriy Penkin
  - do not add a new item to the thumbnail bar, if its already there, fixes bug #549804
  - update documentation, courtesy of Joshua Henderson
  - include gio header in cheese.c
  - added/updated translations
    - ar, courtesy of Usama Akkad
    - bg, courtesy of Alexander Shopov
    - ca, courtesy of Gil Forcada
    - cs, courtesy of Petr Kovar
    - da, courtesy of Kenneth Nielsen
    - de, courtesy of Hendrik Richter
    - en_GB, courtesy of Philip Withnall
    - es, courtesy of Jorge González
    - et, courtesy of Ivar Smolin
    - eu, courtesy of Iñaki Larrañaga Murgoitio
    - fi, courtesy of Ilkka Tuohela
    - fr, courtesy of Robert-André Mauchin
    - gl, courtesy of Ignacio Casal Quinteiro
    - gu, courtesy of Sweta Kothari
    - hu, courtesy of Gabor Kelemen
    - it, courtesy of Alessandro Falappa
    - ja, courtesy of Takeshi AIHANA
    - ko, courtesy of Changwoo Ryu
    - lt, courtesy of Gintautas Miliauskas
    - ml, courtesy of പ്രവീണ്‍ അരിമ്പ്രത്തൊടിയില്‍
    - mr, courtesy of Sandeep Shedmake
    - nb, courtesy of Kjartan Maraas
    - nl, courtesy of Wouter Bolsterlee
    - pl, courtesy of Tomasz Dominikowski
    - pt_BR, courtesy of Og Maciel
    - pt, courtesy of Duarte Loreto
    - ru, courtesy of Alexandre Prokoudine
    - sl, courtesy of Matej Urbančič
    - sq, courtesy of Laurent Dhima
    - sr, courtesy of Горан Ракић
    - sr@latin, courtesy of Goran Rakić
    - sv, courtesy of Daniel Nylander
    - ta, courtesy of I. Felix
    - th, courtesy of Theppitak Karoonboonyanan
    - tr, courtesy of Baris Cicek

version 2.23.92
  - documentation update (not yet finished), courtesy of joshua henderson
  - old photos and videos (before 2.24) are now available in cheese 2.24, fixes bug #547290
  - sort videoformat array and resolution hashtable, courtesy of Hans de Goede
  - dont save duplicated videoformats abut only keep the one with the maximum
    framerate if it provides the same resolution. add correspondent entry only
    once to the resolution hashtable so that we have no more duplicated
    resolutions on preferences dialog. fixes bugs #547144 and #547140,
    courtesy of Hans de Goede
  - remove the old log file if it exists
  - send eos event only if the pipeline was playing, otherwise force
    shutdown. Start a timeout to force unclean shutdown if eos takes
    to much to propagate or doesnt propagate at all, probably fixes bug #547422
  - set take_picture sensitiveness before webcam_stop_video_recording since this
    emits a signal that would lead to another sensitiveness change. see comments on bug #547422
  - set the utility hint for the fullscreen toolbar, partially fixes #548546
  - rename the log file to "log.txt" and prepend it with the running cheese version
  - cheese crashes no more when no device is set in gconf, partially fixes bug #546868, courtesy of Hans de Goede
  - display toolbar when entering into fullscreen mode, fixes bug #548546, courtesy of Felix Kaser
  - added/updated translations
    - bg, courtesy of Alexander Shopov
    - de, courtesy of Wolfgang Stoeggl
    - el, courtesy of Athanasios Lefteris
    - en_GB, courtesy of Philip Withnall
    - gu, courtesy of Sweta Kothari
    - hi, courtesy of Rajesh Ranjan
    - hr, courtesy of "Last-Translator: \n"
    - it, courtesy of Alessandro Falappa
    - ko, courtesy of Changwoo Ryu
    - nl, courtesy of Wouter Bolsterlee
    - pt, courtesy of Duarte Loreto
    - sl, courtesy of Matej Urbančič
    - zh_CN, courtesy of 甘露 (Lu Gan)

version 2.23.91
  - cheese.desktop file now respects freedesktop SPEC, fixes bug #550195, courtesy of Pacho Ramos
  - a small syntax cleanup made with uncrustify
  - waf did not install the files properly, now it does
  - add the dynamic bindir to the dbus file
  - update waf to 1.4.3 and make it working again
  - added/updated translations
    - ar, courtesy of Youssef Chahibi
    - dz, courtesy of Dawa pemo
    - es, courtesy of Jorge González
    - et, courtesy of Ivar Smolin
    - ga, courtesy of Seán de Búrca
    - he, courtesy of Mark Krapivner
    - ja, courtesy of Takeshi AIHANA
    - mk, courtesy of Arangel Angov
    - or, courtesy of Manoj Kumar Giri
    - pa, courtesy of Amanpreet Singh Alam
    - pl, courtesy of Tomasz Dominikowski
    - pt_BR, courtesy of Rodrigo Flores
    - sq, courtesy of Laurent Dhima
    - sv, courtesy of Daniel Nylander
    - te, courtesy of Krishna Babu K
    - vi, courtesy of Clytie Siddall
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao

version 2.23.90
  - call gdk_x11_window_set_user_time to raise the cheese window if its called twice
  - don't start cheese twice if another instance is running, fixes bug #527736, courtesy of Felix Kaser
  - remove gtk_init and gst_init, according to the docs these are not needed if we use gtk_get_option_group and gst_init_get_option_group
  - align the buttons with the thumbnail bar
  - improve the fullscreen mode, fixes bug #547405, courtesy of Felix Kaser
  - select the last thumbnail item, if the last one was deleted 
  - hitting space when the countdown has already begun, distorts no more the countdown, fixes bug #547403
  - remove a thumbnail item immidiately from the thumbnail row if it was deleted
  - use the eog scrollbar for cheese media, fixes bug #511916, courtesy of Patryk Zawadzki
  - disable action_effects while setup_camera is running, fixes bug #547313
  - add people who contributed to cheese to the cheese about window 
  - give a detailed error message if some gstreamer element is missing, fixes bug #522009, courtesy of Todd Eisenberger
  - add some gconf translation improvements, fixes bug #547168 
  - connect button_photo and button_video as proxy widgets for relative RadioActions
  - change action_files sensitiveness on "selection-changed" event, fixes bug 546918
  - don't try to find highest framerate if format is NULL, courtesy of Todd Eisenberger
  - selected effects gconf key values are now standardized, fixes bug #513776
  - add a better hig compliant alert for missing gstreamer elements, fixes bug #522009
  - added a delete action to immediately delete files and a gconf key to show/hide it
  - use "Cheese Webcam Booth" instead of "Cheese" as the desktop entry name, fixes bug #543976
  - add multiple selection in the picture listing pane, fixes bug #481405
  - correct critical warnings, if some gstreamer plugins arent available, fixes bug #522009, courtesy of Todd Eisenberger
  - add several g_free functions to prevent memory leaks 
  - use g_random_int instead of g_rand_int
  - add the multiplex thumbnail generator algorithm
  - disable "Start recording" button until the recording pipeline properly shuts down
  - save generated thumbnails, it seems to have vanished some time ago
  - resolve wrong sorting issue of the thumbnails, fixes bug #546390
  - added/updated translations
    - ar, courtesy of Youssef Chahibi 
    - bn_IN, courtesy of Runa Bhattacharjee 
    - ca, courtesy of Gil Forcada 
    - es, courtesy of Jorge González 
    - et, courtesy of Ivar Smolin 
    - eu, courtesy of Iñaki Larrañaga Murgoitio 
    - fi, courtesy of Ilkka Tuohela 
    - fr, courtesy of Robert-André Mauchin 
    - gl, courtesy of Ignacio Casal Quinteiro 
    - he, courtesy of Mark Krapivner 
    - ja, courtesy of Takeshi AIHANA 
    - kn, courtesy of Shankar Prasad 
    - mk, courtesy of Arangel Angov 
    - ml, courtesy of Manu S Madhav
    - nb, courtesy of Kjartan Maraas 
    - pt_BR, courtesy of Fábio Nogueira 
    - sv, courtesy of Daniel Nylander 
    - th, courtesy of Akom C. 
    - zh_HK, courtesy of Chao-Hsiung Liao 
    - zh_TW, courtesy of Chao-Hsiung Liao 

version 2.23.6
  - add a fullscreen mode for kiosks, fixes #478852, courtesy of Felix Kaser
  - wait until the video has been recorded, to add it to the thumbnail bar, partially fixes #545212
  - move thumbnail generation to its own thread, displaying a loading icon while
  	generating thumbnail and a fallback icon if thumbnail fails, fixes bug #545151, courtesy of Filippo Argiolas
  - toggle effects button if effects is enabled using menu, fixes bug #539195, courtesy of Filippo Argiolas
  - make cheese have a fullscreen mode for kiosks, fixes bug #478852
  - resolve sluggish video and out-of-sync audio, fixes bug #542014, courtesy of Filippo Argiolas
  - do not crash on preferences with no camera attached, fixes bug #544062, courtesy of Filippo Argiolas
  - cheese should ask to delete files if moving to trash fails, fixes bug #545950, courtesy of Filippo Argiolas
  - cheese crashed with move all to trash if no trash can be accessed, fixes bug #545997, courtesy of Filippo Argiolas
  - added/updated translations
    - ar, courtesy of Khaled Hosny
    - ca, courtesy of Gil Forcada
    - el, courtesy of Simos Xenitellis
    - es, courtesy of Jorge González
    - fr, courtesy of Bruno Brouard
    - gl, courtesy of Ignacio Casal Quinteiro
    - ja, courtesy of Takeshi Aihana
    - mk, courtesy of Arangel Angov
    - nl, courtesy of Wouter Bolsterlee
    - oc, courtesy of Yannig Marchegay
    - pl, courtesy of Tomasz Dominikowski
    - pt, courtesy of Duarte Loreto
    - th, courtesy of Akom C.
    - zh_TW, courtesy of Chao-Hsiung Liao


version 2.23.5
  - make recording of videos work again, fixes bug #523475, courtesy of Filippo Argiolas
  - bump gstreamer requirements to 0.10.16
  - fixes cheese_print_handler, which resulted in empty cheese logs, courtesy of Filippo Argiolas
  - allow to choose the webcam using the preference dialog, fixes bug #522200, courtesy of Ryan Zeigler
  - remove some gcc warnings, fixes bug #537490, courtesy of Cosimo Cecchi
  - fixed typo, which prevented hildon mode to compile cleanly
  - removed included <X11/extensions/xf86vmode.h>, fixes bug #539631, courtesy of Marc-Andre Lureau
  - make hal-device-id command line option work, fixes bug #498023, courtesy of Ryan Zeigler
  - use ogv as default video extension, fixes bug #524021
  - added/updated translations
    - es, courtesy of Jorge González
    - sv, courtesy of Daniel Nylander
    - nb, courtesy of Kjartan Maraas
    - ko, courtesy of Changwoo Ryu
    - bg, courtesy of Alexander Shopov
    - oc, courtesy of Yannig Marchegay
    - et, courtesy of Ivar Smolin
    - pt_BR, courtesy of Fabrício Godoy and Ferreira Fontenelle
    - ps, courtesy of Zabeeh Khan
    - gl, courtesy of Ignacio Casal Quinteiro
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao

version 2.23.4
  - fix a crash, when using about/quit menu items in hildon mode, fixes bug #535582, courtesy of Michael Terry
  - Instead of crashing report when certain gstreamer are not found, fixes bug #522009, courtesy of Todd Eisenberger
  - use intltools 0.40 for building with autotools
  - added/updated translations
    - ar, courtesy of Khaled Hosny. 
    - fi, courtesy of Tommi Vainikainen
    - nn, courtesy of Eirik U. Birkeland
    - vi, courtesy of Clytie Siddall
    - zh_CN, courtesy of 甘露 (Lu Gan)

version 2.23.3
  - add new flash and remove changing gamma for simulating flash. the 
    new flash works best if you run a composited desktop, fixes bug #526214,
    courtesy of Alex Jones 
  - fix segfault on startup if video or photo directory gconf setting is missing,
  	fixes bug #534480, courtesy of Alexander Jones
  - add support to set the video and photo path in gconf, courtesy of Felix Kaser
  - added/updated translations
    - ar, courtesy of Djihed Afifi. 
    - es, courtesy of Jorge González
    - et, courtesy of Ivar Smolin
    - gl, courtesy of Ignacio Casal Quinteiro
    - he, courtesy of Mark Krapivner
    - hu, courtesy of Máté Őry.
    - nb, courtesy of Kjartan Maraas

version 2.23.2
  - use a better icon for the effects button, fixes bug #511369
  - store photos and videos in xdg directories, fixes bug #509475, courtesy of Felix Kaser
  - use a toggle button for the effects button, fixes bug #527870
  - add support for nautilus send to. this replaces "send by email" where available, fixes bug #528249, courtesy of Jose Dapena Paz
  - name the files to the date, when they were created, fixes bug #525739
  - add a preferences dialog with basic resolution changing, partially fixes #522200, courtesy of James Liggett
  - use gtk theme colors for the countdown widget
  - align the numbers and the camera on the countdown widget, courtesy of Andrea Cimitan
  - add a border, color shading and highlight to the countdown widget, to make it even more sexy, courtesy of Andrea Cimitan
  - make the countdown numbers translatable the right way
  - fix invalid free in cheese, fixes bug #529467, courtesy of Matthias Clasen
  - take picture button is enabled outside gtk thread lock, fixes bug #529789, courtesy of Gary Lasker
  - don't display the toplevel window by default, fixes bug #529276, courtesy of Loïc Minier
  - added/updated translations
    - en_GB, courtesy of Philip Withnall
    - es, courtesy of Jorge González
    - et, courtesy of Ivar Smolin
    - gl, courtesy of Ignacio Casal Quinteiro
    - he, courtesy of Mark Krapivner
    - nb, courtesy of Kjartan Maraas
    - nl, courtesy of Tino Meinen
    - pt_BR, courtesy of Luis Motta.
    - sl, courtesy of Matej Urbančič
    - th, courtesy of Pornpimon Pradabsri 

version 2.23.1
  - add cheese to sound & video in the application menu, fixes bug #519846
  - add hildon support to cheese, fixes bug #519548, courtesy of Matthew Garret
  - add menu entry for the countdown, fixes bug #511160
  - add the gedit warning box when no camera is found, fixes bug #511945, courtesy of sebastian keller
  - buttons and menu items should use Title Case
  - change the theora file extension to .gov, fixes bug #524021
  - cheese crashes if getting information from a webcam fails, courtesy of Sjoerd Simons, fixes bug #522197
  - cheese did not choose the right thumbnails for already taken pictures, fixes bug #524814
  - cheese does not list its gnome-vfs dependency, fixes bug #522152, courtesy of Alex Rostovtsev
  - cheese doesn't open the webcam device set in gconf, courtesy of Sjoerd Simons, fixes bug #522198
  - do not allow to take pictures, while the webcam is initializing, fixes bug #523121
  - fix a crash while initializing webcam, fixes bug #522143, courtesy of Alex Rostovtsev
  - fix a crash, when a file was deleted twice
  - fix regression of gio, Dnd works again, courtesy of Cosimo Cecchi, fixes bug #526398
  - set the max waiting time for detecting a camera to 10 seconds, fixes bug #520394
  - show the pretty countdown widget by default
  - use a better effects icon, partially fixes bug #511369, courtesy of baptiste mille-mathias
  - use new cheese description, fixes bug #512091
  - added/updated translations
    - el, courtesy of Nick Paraschou
    - en_GB, courtesy of Philip Withnall
    - es, courtesy of Jorge González
    - et, courtesy of Mattias Põldaru
    - he, courtesy of Mark Krapivner
    - nb, courtesy of Kjartan Maraas
    - nn, courtesy of Eskild Hustvedt
    - ru, courtesy of Vasiliy Faronov
    - sl, courtesy of Matej Urbančič

version 2.22.0
  - typo in the documentaton: ximageskink instead of ximagesink
  - menu entries for take a photo and recording never switched, fixes bug #516745
  - select a thumb near the deleted item, fixes bug #505442
  - make sure we have the right prototype definition, fixes bug #519030
  - Rephrased hard-to-understand sentence in docs, fixes bug #518838, courtesy of Claude Paroz
  - added/updated translations
    - be@latin, courtesy of Ihar Hrachyshka
    - da, courtesy of Kenneth Nielsen
    - el, courtesy of Athanasios Lefteris
    - en_GB, courtesy of Philip Withnall
    - es, courtesy of Jorge González
    - fr, courtesy of Claude Paroz and Stéphane Raimbault
    - gu, courtesy of Ankit Patel
    - he, courtesy of Yair Hershkovitz
    - hu, courtesy of Gabor Kelemen
    - it, courtesy of Alessandro Falappa
    - lt, courtesy of Gintautas Miliauskas
    - ml, courtesy of Ani Peter
    - mr, courtesy of Sandeep Shedmake
    - uk, courtesy of Maxim Dziumanenko
    - zh_CN, courtesy of YangZhang
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao

version 2.21.92:
  - drop libglade and use GtkBuilder instead.
  - putted gtk calls in critical section in threads, fixes bug #516697, courtesy of Mathias Clasen
  - make use of the gconf countdown setting and show or hide the countdown depending on that
  - added/updated translations
    - ko, courtesy of Changwoo Ryu
    - th, courtesy of Theppitak Karoonboonyanan
    - sl, courtesy of Matej Urbančič
    - bn_IN, courtesy of Runa Bhattacharjee
    - pa, courtesy of Amanpreet Singh Brar
    - nl, courtesy of Wouter Bolsterlee.
    - nb, courtesy of Kjartan Maraas
    - ar, courtesy of Djihed Afifi
    - tr, courtesy of Baris Cicek
    - ja, courtesy of Takeshi Aihana
    - ca, courtesy of Gil Forcada
    - cs, courtesy of Vitezslav Kotrla.
    - pt, courtesy of Duarte Loreto
    - oc, courtesy of Yannig Marchegay
    - mk, courtesy of Arangel Angov
    - zh_CN, courtesy of YangZhang
    - hu, courtesy of Adam Pongracz

version 2.21.91:
  - replaced all gnome-vfs calls by gio
  - install bugreport script in libexec instead of lib, fixes bug #514833
  - translate effect names too, courtesy of Tommi Vainikainen
  - pressing 'esc' cancels countdown/stop video recording, courtesy of Tommi Vainikainen
  - added/updated translations
    - ar, courtesy of Khaled Hosny
    - de, courtesy of Hendrik Brandt
    - es, courtesy of Jorge González
    - et, courtesy of Ivar Smolin
    - eu, courtesy of Iñaki Larrañaga Murgoitio
    - fi, courtesy of Tommi Vainikainen
    - fr, courtesy of Robert-André Mauchin and Stéphane Raimbault
    - it, courtesy of Alessandro Falappa
    - nb, courtesy of Kjartan Maraas
    - oc, courtesy of Yannig Marchegay
    - pl, courtesy of GNOME PL Team
    - pt_BR, courtesy of Pedro de Medeiro and Og Maciel
    - sv, courtesy of Daniel Nylander 
    - zh_HK, courtesy of Chao-Hsiung Liao
    - zh_TW, courtesy of Chao-Hsiung Liao

version 2.21.90.1:
  - new effect images by Lapo Calamandrei and Or Dvory (again)
  - the bugreport script didnt get copied on make dist

version 2.21.90:
  - new effect images by Lapo Calamandrei and gidesa
  - fix bug #510610 - Typo at the documentation
  - Remove gnome-vfs completely from cheese-window.c
  - Use gio instead of gnome-vfs for file copy
  - Make Save dialog title localizable
  - Don't use gnome-vfs for opening links in about dialog
  - Write logging to file ~/.gnome2/cheese/log and send this along in bug-buddy
    reports. Patch by <ruledbyfaith@gmail.com>. fixes bug #510270
  - Plug some leaks. Apply patches of Mauro <mukadr@gmail.com> of GHOP project. fixes bug #505441
  - Run webcam detection in background thread. Fixes bug #505553. Patch by Steve Magoun <steve.magoun@canonical.com>
  - Uso GIO g_file_trash() to trash files, patch by Luca Ferretti
  - Update to new manual provided by Joshua Henderson as part of GHOP
  - remove the queue-size=2, this should fix bug #507416 - iSight camera does not work in gstreamer
  - added/updated translations
    - ar, courtesy of Khaled Hosny
    - es, courtesy of Jorge González
    - et, courtesy of Ivar Smolin
    - eu, courtesy of Iñaki Larrañaga Murgoitio
    - ga, courtesy of Seán de Búrca
    - gl, courtesy of Ignacio Casal Quinteiro
    - he, courtesy of Yair Hershkovitz
    - mk, courtesy of Jovan Naumovski
    - mr, courtesy of Sandeep Shedmake
    - nb, courtesy of Kjartan Maraas
    - oc, courtesy of Yannig Marchegay
    - ru, courtesy of Vasiliy Faronov
    - sv, courtesy of Daniel Nylander
    - uk, courtesy of Maxim Dziumanenko
    - zh_CN, courtesy of YangZhang

version 2.21.5:
  - version bump to follow the gnome release cycle
  - add a stylish countdown widget by Mirco "MacSlow" Müller, courtesy of Patryk Zawadzki
  - add X-GNOME-Bugzilla-* keys and validate .desktop file. fixes bug #508910, courtesy of Luca Ferretti
  -  vertical and horizontal flip options were switched (again). fixes bug #479238, courtesy of Steve Magoun
  - use the gst-player by Mathias Hasselman for playing the shutter sound
  - removed color forcing. This has been fixed in gstreamer
  - do not crash when trash directory is not present. fixes bug #507071
  - make cheese build against uninstalled gstreamer. fixes bug #479259, courtesy of Tim Philip Müller
  - added/updated translations
    - et, courtesy of Ivar Smolin
    - ja, courtesy of Takeshi Aihana
    - ca, courtesy of Gil Forcada
    - oc, courtesy of Yannig Marchegay    
    - sv, courtesy of Daniel Nylander
    - fr, courtesy of Robert-André Mauchin
    - pt_BR, courtesy of Rodrigo Flores

version 0.3.0:
  - add a shutter sound, when taking a photo
  - sort the thumbnail chronologically
  - make the effect chooser look a bit nicer
  - give thumbnails a frame like in nautilus and eog. fixes bug #500819
  - enable shortcuts if the mouse pointer is over the xoverlay. fixes bug #493196
  - add new shortcuts
    - space for take a photo/start-stop recording
    - <ctrl q> for exiting
    - f1 for help
    - delete for removing a photo or video
  - add a gconf backend
  - chosen effects are stored in gconf. fixes bug #488834
  - store the used webcam device in gconf. partially fixes bug #473038
  - use a throbber, when the camera is loading
  - add drag and drop support to the iconview
  - vertical and horizontal flip were switched. fixes bug #479238
  - many usability improvements. partially fixes bug #501337
  - point to the right homepage in the about dialog
  - add a boilerplate for a manual in cheese. partially fixes #480628
  - make video and photo button a toggle button. fixes bug #498022
  - make links on about dialog clickable. fixes bug #499425
  - translate menu items created by gtkuimanager, fixes bug #500821
  - change the first item in menu to "Cheese"
  - add a "Move all to trash" option
  - use gtkuimanager for the menu
  - give the ability to record videos from the menu
  - provide access to the effect chooser using the menu
  - use radio buttons in the menu to change between photo and video mode
  - use HAL to detect webcams
  - make ximagesink an xvimagesink work for all cameras
  - only use raw video formats. fixes bug #502174
  - use the highest resolution for each camera
  - add --verbose command line option, fixes bug #499399
  - cheese was refactored and uses now a webcam class
  - removed some memory leaks
  - fixed many, many bugs
  - added/updated translations
    - ar, courtesy of Djihed Afifi
    - ca, courtesy of Carlos Garcia Porcel
    - cs, courtesy of Vitezslav Kotrla
    - de, courtesy of Andre Klapper
    - el, courtesy of Athanasios Lefteris
    - es, courtesy of Jorge González
    - fr, courtesy of Pierre Slamich
    - gl, courtesy of Ignacio Casal Quinteiro
    - it, courtesy of Alessandro Falappa
    - nb, courtesy of Kjartan Maraas
    - oc, courtesy of Yannig Marchegay
    - pt, courtesy of Miguel Rosa
    - ro, courtesy of Anastase Valentin
    - sl, courtesy of Deni Bačić
    - sv, courtesy of Daniel Nylander

version 0.2.4:
  - fix #472576 - cheese takes longer to start as more pictures are stored
  - fix #473560 - v4l-recorded videos are zero byte big, courtesy of Patryk Zawadzki
  - translation error in de

version 0.2.3:
  - add keystrokes:
    - t, T, Space for taking photos and videos
    - Enter for opening an item
    - Delete for deleting an item
    - Left and Right for scrolling through the view
  - add a flash, when taking photos, courtesy of Patryk Zawadzki
  - use 25fps for video recording
  - video recording did not work. fixed
  - make ximagesink work with the photo pipeline
  - added/updated translations
    - da, courtesy of Anders K. Madsen
    - es, courtesy of Ricardo González Castro
    - gl, courtesy of Ricardo González Castro
    - it, courtesy of Alessandro Falappa
    - ja, courtesy of Takeshi Aihana
    - pl, courtesy of Tomasz Dominikowski

version 0.2.2:
  - workaround on a gstreamer-bug, which made the colors look wrong with
    v4l-devices, courtesy of Patryk Zawadzki
  - activate countdown by default
  - the countdown is not available in video and segfaultet. fixed
  - use g_timeout_add instead of g_timeout_add_seconds

version 0.2.1:
  - improvement the video pipline. and i mean a LOT of improvement
  - add a countdown, when taking a photo
  - add a time counter to the video recording
  - added the following export methods/capabilities:
    - open the file with gnome-open
    - save as dialog
    - delete
    - send by mail
    - export to flickr
    - export to f-spot
    - set as account photo
  - we found the bug! v4l works now, courtesy of Patryk Zawadzki
  - added a popupmenu to the iconview
  - added some parts of the lucas(R)-eye of gnome iconview
  - if the same effects were chosen in photo and video, they wont apply. fixed
  - the first item in the iconbar wasnt deleted. fixed
  - updated translations:
    - cs, courtesy Vítězslav Kotrla
    - de
    - fr, courtesy of Pierre Slamich
    - it, courtesy of Alessandro Falappa
    - nl, courtesy of Wouter Bolsterlee
    - pt, courtesy of Miguel Rosa

version 0.2.0:
  - store video thumbnails in the right thumbnail directory
  - video support. we can record a video with audio taken from any source
  - add mnemonics for the buttons in the ui
  - probably the dumbest change ever: the fsf has changed its address
  - updated translations:
    - de
    - fr, courtesy of Pierre Slamich
    - it, courtesy of Alessandro Falappa
    - pl, courtesy of Tomasz Dominikowski
    - pt, courtesy of Miguel Rosa

version 0.1.4:
  - remove photos automatically from the thumbnail row
  - check automatically for webcams and their  resolution
  - notification if cheese isn't able to get the webcam working
  - V4L support, courtesy of Diego Escalante Urrelo
  - store photos under ~/.gnome2/cheese/images
  - add only valid jpeg photos to the thumbnail row
  - sort thumbnails aplhabetically before adding them
  - let the window resizable
  - icons were installed with permissions 0755. fixed
  - added gtk-update-icon-cache on installation
  - lot of refactoring
  - new about-window, courtesy of Jaap Haitsma
  - use g18n for i18n
  - updated dutch translation, courtesy of Wouter Bolsterlee
  - updated french translation, courtesy of Pierre Slamich
  - added polish translation, courtesy of Tomasz Dominikowski
  - several fixes

version 0.1.3:
  - let the glade file also translatable
  - added the icon to the .desktop-file
  - Cheese didn't use the various translations. fixed
  - Cheese was hiding from the taskbar. fixed
  - added dutch translation, courtesy of Max Beauchez
  - added french translation, courtesy of Pierre Slamich
  - several fixes

version 0.1.2:
  - the buildsystem is now toc2, big thanks to Stephan Beal for helping out
  - added the new cheese icon, courtesy of Andreas Nilsson and Josef Vybíral
  - added czech translation, courtesy of Vítězslav Kotrla
  - added portuguese translation, courtesy of Miguel Rosa
  - added spanish translation, courtesy of Ricardo González Castro
  - added galician translation, courtesy of Ricardo González Castro
  - added italian translation, courtesy of Alessandro Falappa
  - several fixes

version 0.1.1:
  - added new effect-chooser
  - allowing to chose more than one effect at the same time
  - added german translation
  - several fixes

version 0.1.0:
  - initial version
