Inheritance diagram for _WvConStream:

Public Member Functions
	_WvConStream (int _rfd, int _wfd, WvStringParm name=WvString::null)
virtual void	close ()
	Closes the file descriptors.
virtual bool	isok () const
	return true if the stream is actually usable right now
int	getrfd () const
	Returns the Unix file descriptor for reading from this stream.
int	getwfd () const
	Returns the Unix file descriptor for writing to this stream.
int	getfd () const
	Returns the Unix file descriptor for reading and writing.
void	set_nonblock (bool nonblock)
	Make the fds on this stream blocking or non-blocking.
void	set_close_on_exec (bool close_on_exec)
	Make the fds on this stream close-on-exec or not.
virtual size_t	uread (void *buf, size_t count)
	unbuffered I/O functions; these ignore the buffer, which is handled by read().
virtual size_t	uwrite (const void *buf, size_t count)
	unbuffered I/O functions; these ignore the buffer, which is handled by write().
virtual void	pre_select (SelectInfo &si)
	pre_select() sets up for eventually calling ::select().
void	pre_select (SelectInfo &si, const SelectRequest &r)
	A more convenient version of pre_select() usable for overriding the 'want' value temporarily.
virtual bool	post_select (SelectInfo &si)
	post_select() is called after ::select(), and returns true if this object is now ready.
bool	post_select (SelectInfo &si, const SelectRequest &r)
	A more convenient version of post_select() usable for overriding the 'want' value temporarily.
virtual void	maybe_autoclose ()
	Auto-close the stream if the time is right.
const char *	wstype () const
virtual void	seterr (int _errnum)
	Override seterr() from WvError so that it auto-closes the stream.
void	seterr (WvStringParm specialerr)
void	seterr (WVSTRING_FORMAT_DECL)
void	seterr (const WvErrorBase &err)
virtual size_t	read (void *buf, size_t count)
	read a data block on the stream.
virtual size_t	read (WvBuf &outbuf, size_t count)
	Reads up to 'count' bytes of data from the stream into the buffer.
virtual void	unread (WvBuf &outbuf, size_t count)
	Puts data back into the stream's internal buffer.
virtual size_t	write (const void *buf, size_t count)
	Write data to the stream.
virtual size_t	write (WvBuf &inbuf, size_t count=INT_MAX)
	Writes data to the stream from the given buffer.
size_t	write (WvStringParm s)
	print a preformatted WvString to the stream.
void	outbuf_limit (size_t size)
	set the maximum size of outbuf, beyond which a call to write() will return 0.
virtual void	noread ()
	Shuts down the reading side of the stream.
virtual void	nowrite ()
	Shuts down the writing side of the stream.
virtual bool	isreadable ()
	Returns true if the stream is readable.
virtual bool	iswritable ()
	Returns true if the stream is writable (without using the outbuf).
char *	getline (time_t wait_msec=0, char separator= '\n', int readahead=1024)
	Read up to one line of data from the stream and return a pointer to the internal buffer containing this line.
char *	getline (int wait_msec, char separator= '\n', int readahead=1024)
	Auto-convert int to time_t.
char *	getline (double wait_msec, char separator= '\n', int readahead=1024)
	Auto-convert double to time_t.
char *	blocking_getline (time_t wait_msec, int separator= '\n', int readahead=1024)
	This is a version of getline() that allows you to block for more data to arrive.
char *	continue_getline (time_t wait_msec, int separator= '\n', int readahead=1024)
	This is a version of blocking_getline() that uses continue_select to avoid blocking other streams.
void	queuemin (size_t count)
	force read() to not return any bytes unless 'count' bytes can be read at once.
void	drain ()
	drain the input buffer (read and discard data until select(0) returns false)
void	delay_output (bool is_delayed)
	force write() to always buffer output.
void	auto_flush (bool is_automatic)
	if true, force write() to call flush() each time, the default behavour.
virtual bool	flush (time_t msec_timeout)
	flush the output buffer, if we can do it without delaying more than msec_timeout milliseconds at a time.
virtual bool	should_flush ()
	Returns true if we want to flush the output buffer right now.
void	flush_then_close (int msec_timeout)
	flush the output buffer automatically as select() is called.
void	xpre_select (SelectInfo &si, const SelectRequest &r)
	Like pre_select(), but still exists even if you override the other pre_select() in a subclass.
bool	xpost_select (SelectInfo &si, const SelectRequest &r)
	Like post_select(), but still exists even if you override the other post_select() in a subclass.
bool	select (time_t msec_timeout)
	Return true if any of the requested features are true on the stream.
bool	select (time_t msec_timeout, bool readable, bool writable, bool isex=false)
	This version of select() sets forceable==false, so we use the exact readable/writable/isexception options provided.
void	runonce (time_t msec_timeout=-1)
	Exactly the same as: if (select(timeout)) callback();.
IWvStream::SelectRequest	get_select_request ()
	Use get_select_request() to save the current state of the selection state of this stream.
void	force_select (bool readable, bool writable, bool isexception=false)
	Use force_select() to force one or more particular modes (readable, writable, or isexception) to true when selecting on this stream.
void	undo_force_select (bool readable, bool writable, bool isexception=false)
	Undo a previous force_select() - ie.
bool	continue_select (time_t msec_timeout)
	return to the caller from execute(), but don't really return exactly; this uses WvCont::yield() to return to the caller of callback() without losing our place in execute() itself.
void	terminate_continue_select ()
	you MUST run this from your destructor if you use continue_select(), or very weird things will happen if someone deletes your object while in continue_select().
virtual const WvAddr *	src () const
	get the remote address from which the last data block was received.
void	setcallback (IWvStreamCallback _callfunc)
	define the callback function for this stream, called whenever the callback() member is run, and passed the 'userdata' pointer.
IWvStreamCallback	setreadcallback (IWvStreamCallback _callback)
	Sets a callback to be invoked when the stream is readable.
IWvStreamCallback	setwritecallback (IWvStreamCallback _callback)
	Sets a callback to be invoked when the stream is writable.
IWvStreamCallback	setexceptcallback (IWvStreamCallback _callback)
	Sets a callback to be invoked when the stream is in exception state.
IWvStreamCallback	setclosecallback (IWvStreamCallback _callback)
	Sets a callback to be invoked on close().
void	autoforward (WvStream &s)
	set the callback function for this stream to an internal routine that auto-forwards all incoming stream data to the given output stream.
void	noautoforward ()
	Stops autoforwarding.
void *	_callwrap (void *)
	A wrapper that's compatible with WvCont, but calls the "real" callback.
void	_callback ()
	Actually call the registered callfunc and execute().
virtual void	callback ()
	if the stream has a callback function defined, call it now.
void	alarm (time_t msec_timeout)
	set an alarm, ie.
time_t	alarm_remaining ()
	return the number of milliseconds remaining before the alarm will go off; -1 means no alarm is set (infinity), 0 means the alarm has been hit and will be cleared by the next callback().
size_t	print (WvStringParm s)
size_t	print (WVSTRING_FORMAT_DECL)
	preformat and write() a string.
size_t	operator() (WvStringParm s)
size_t	operator() (WVSTRING_FORMAT_DECL)
const char *	wsname () const
void	set_wsname (WvStringParm wsname)
void	set_wsname (WVSTRING_FORMAT_DECL)
WSID	wsid () const
virtual WvString	getattr (WvStringParm name) const
virtual int	geterr () const
	If isok() is false, return the system error number corresponding to the error, -1 for a special error string (which you can obtain with errstr()) or 0 on end of file.
virtual WvString	errstr () const
void	seterr_both (int _errnum, WvStringParm specialerr)
void	seterr_both (int _errnum, WVSTRING_FORMAT_DECL)
void	noerr ()
	Reset our error state - there's no error condition anymore.
virtual unsigned int	addRef ()=0
	Indicate you are using this object.
virtual unsigned int	release ()=0
	Indicate that you are finished using this object.
virtual IObject *	getInterface (const UUID &)=0
	Returns the requested XPLC interface.
virtual IWeakRef *	getWeakRef ()=0
	Return a weak reference to this object.

Static Public Member Functions
static void	autoforward_callback (WvStream &input, WvStream &output)
static IWvStream *	find_by_wsid (WSID wsid)
static IWvStream *	create (WvStringParm moniker, IObject *obj=NULL)
static WvString	strerror (int errnum)
	A replacement for the operating system ::strerror() function that can map more kinds of error strings (especially in win32).

Public Attributes
bool	isopen
WvStream *	read_requires_writable
	If this is set, select() doesn't return true for read unless the given stream also returns true for write.
WvStream *	write_requires_readable
	If this is set, select() doesn't return true for write unless the given stream also returns true for read.
bool	uses_continue_select
	If this is set, enables the use of continue_select().
size_t	personal_stack_size
	Specifies the stack size to reserve for continue_select().
bool	alarm_was_ticking
	This will be true during callback execution if the callback was triggered by the alarm going off.
bool	stop_read
	True if noread()/nowrite()/close() have been called, respectively.
bool	stop_write
bool	closed

Protected Member Functions
void	setfd (int fd)
	Sets the file descriptor for both reading and writing.
void	setattr (WvStringParm name, WvStringParm value)
void	_build_selectinfo (SelectInfo &si, time_t msec_timeout, bool readable, bool writable, bool isexcept, bool forceable)
int	_do_select (SelectInfo &si)
bool	_process_selectinfo (SelectInfo &si, bool forceable)
bool	flush_outbuf (time_t msec_timeout)
virtual bool	flush_internal (time_t msec_timeout)
virtual void	execute ()
	The callback() function calls execute(), and then calls the user- specified callback if one is defined.

Static Protected Member Functions
static void	debugger_streams_display_header (WvStringParm cmd, WvStreamsDebugger::ResultCallback result_cb)
static void	debugger_streams_display_one_stream (WvStream *s, WvStringParm cmd, WvStreamsDebugger::ResultCallback result_cb)
static void	debugger_streams_maybe_display_one_stream (WvStream *s, WvStringParm cmd, const WvStringList &args, WvStreamsDebugger::ResultCallback result_cb)

Protected Attributes
int	rfd
	The file descriptor for reading.
int	wfd
	The file descriptor for writing.
bool	shutdown_read
	Have we actually shut down the read/write sides?
bool	shutdown_write
WvDynBuf	inbuf
WvDynBuf	outbuf
IWvStreamCallback	callfunc
wv::function< void (void )>	call_ctx
IWvStreamCallback	readcb
IWvStreamCallback	writecb
IWvStreamCallback	exceptcb
IWvStreamCallback	closecb
size_t	max_outbuf_size
bool	outbuf_delayed_flush
bool	is_auto_flush
bool	want_to_flush
bool	is_flushing
size_t	queue_min
time_t	autoclose_time
WvTime	alarm_time
WvTime	last_alarm_check
int	errnum
WvString	errstring

Static Protected Attributes
static WvStream *	globalstream = NULL

Detailed Description

Definition at line 14 of file wvconstream.cc.

Member Function Documentation

void _WvConStream::close ( )

virtual

Closes the file descriptors.

If it is undesirable for the file descriptors to be closed by this stream, duplicate the file descriptors using dup() before creating the stream.

Reimplemented from WvFdStream.

Definition at line 42 of file wvconstream.cc.

References WvFdStream::setfd().

void WvFdStream::setfd ( int fd )

inlineprotectedinherited

Sets the file descriptor for both reading and writing.

Convenience method.

Definition at line 36 of file wvfdstream.h.

References WvFdStream::rfd, and WvFdStream::wfd.

Referenced by close(), WvTCPConn::do_connect(), WvIPRawStream::WvIPRawStream(), WvUDPStream::WvUDPStream(), and WvUnixConn::WvUnixConn().

int WvFdStream::getrfd ( ) const

inlinevirtualinherited

Returns the Unix file descriptor for reading from this stream.

Returns: the file descriptor, or -1 if none

Reimplemented from WvStream.

Definition at line 63 of file wvfdstream.h.

References WvFdStream::rfd.

Referenced by WvModemeam_8h_source.html#l00024">WvFdStream::rfd.

Referenced by

Public Member Functions

Static Public Member Functions

Public Attributes

Protected Member Functions

Static Protected Member Functions

Protected Attributes

Static Protected Attributes

Detailed Description

Member Function Documentation