Installation
==================

-If you want to get up and running quickly and easily-

Compile mldonkey without GUI support
You have to have zlib, zlib-dev and m4 packages installed.
For gd-made statistics libgd2-dev should be installed.

Mldonkey/> ./configure
Mldonkey/> make

There is no additional 'make install' command. Copy the file 'mlnet'
(this is MLdonkey) to the folder where you've choosen to run MLdonkey.

Start 'mlnet'

Mlnet/> ./mlnet
Leave the terminal window open. MLdonkey is now running.

Open a browser and type in the URL http://localhost:4080 <enter>.
A web-based interface to MLdonkey appears. Certain ports enabling inbound
routing on your firewall/router need to be opened to fully use MLdonkey.
The Options tab in the web interface shows the ports.

Downloaded files will be found in the sub-directory incoming/, while
files to be shared should be in a sub-directory called shared/.

-You're done!-

Some goodies (make_torrent, ed2k_hash) come with mldonkey, you can also
compile them using the additionnal command:

Mldonkey/> make utils

==================
There are additional ways besides the web interface to control Mlnet(MLdonkey).
- Compiling support for the 'mlgui' application while compiling MLdonkey
  is one. This requires additional libraries, which, depending on your platform
  and skill, may be easy or not so easy to add. The 'mlnet' application functions
  fine without the GUI.
- Other applications are written by third-parties and available for specific
  platforms. These vary in stability and functionality.
  One example is Sancho: http://sancho-gui.sourceforge.net/

Compiling mldonkey with mldonkey_gui support:
-------------------

You have now two options to compile mldonkey:
- Individually install Objective-Caml 3.08.4, LablGTK 1.2.7 and/or LablGTK-2.4.0.
  Then, you can compile mldonkey. The instructions are given below at '1)'.
- If you want to install ocaml and lablgtk only to compile mldonkey. You must
  have a good internet access (you want mldonkey after all :). You must have
  "wget" installed. Then, run:

./configure --enable-batch

The configure script will download ocaml and lablgtk, compile and install them
locally so that they can be used to compile mldonkey. Steps below can be skipped
now. Be patient. Ocaml and lablgtk tools take a while to compile and install.

Note: At least 70 M of free disk space is required on the partition where mldonkey
is compiled.

------------------------------------------------------------------------
1) Installing required tools: Objective-Caml 3.08.3 and LablGTK

 1.1) Objective-Caml 3.08.4 (from http://pauillac.inria.fr/caml)

    ~/tmp> wget http://caml.inria.fr/distrib/ocaml-3.08/ocaml-3.08.4.tar.gz
    ~/tmp> tar zxf ocaml-3.08.4.tar.gz
    ~/tmp> cd ocaml-3.08.4

    ~/tmp/ocaml-3.08.4> ./configure
    ~/tmp/ocaml-3.08.4> make world.opt
    ~/tmp/ocaml-3.08.4> make install

 1.2.1) LablGTK 1.2.7 for GTK1
      (from http://wwwfun.kurims.kyoto-u.ac.jp/soft/olabl/lablgtk.html)

    ~/tmp> wget http://wwwfun.kurims.kyoto-u.ac.jp/soft/olabl/dist/lablgtk-1.2.7.tar.gz
    ~/tmp> tar zxf lablgtk-1.2.7.tar.gz
    ~/tmp> cd lablgtk-1.2.7
    ~/tmp/lablgtk-1.2.7> make configure
    ~/tmp/lablgtk-1.2.7> make
    ~/tmp/lablgtk-1.2.7> make opt
    ~/tmp/lablgtk-1.2.7> make install

 1.2.2) LablGTK-2.4.0 for GTK2
      (from http://wwwfun.kurims.kyoto-u.ac.jp/soft/olabl/lablgtk.html)

    ~/tmp> wget http://wwwfun.kurims.kyoto-u.ac.jp/soft/olabl/dist/lablgtk-2.4.0.tar.gz
    ~/tmp> tar zxf lablgtk-2.4.0.tar.gz
    ~/tmp> cd lablgtk-2.4.0
    ~/tmp/lablgtk-2.4.0> ./configure
    ~/tmp/lablgtk-2.4.0> make world
    ~/tmp/lablgtk-2.4.0> make install

2) Compiling mldonkey with GUI:

    To build GTK1 newgui: ./configure --enable-gui=newgui1
    To build GTK1 oldgui: ./configure --enable-gui=oldgui
    To build GTK2 GUI:    ./configure --enable-gui[=newgui2]
    lablgtk-1.2.7 and lablgtk-2.4.0 can both be installed at the same time.

    ~/tmp/mldonkey> make

  You should now have 'mlnet' (the daemon with all network support)
  and 'mlgui' (the interface) No 'make install' is provided. 

  You can disable all other p2p networks using the --disable-multinet option
   with ./configure. Only edonkey support (including Overnet/Kademlia)
   will then be compiled.

------------------------------------------------------------------------

NOTES:
------
To compile on MinGW read this guide:
http://mldonkey.sourceforge.net/Windows
