# translation of cs.po to Czech
# Czech translation for cpufrequtils package
# Czech messages for cpufrequtils.
# Copyright (C) 2007 kavol
# This file is distributed under the same license as the cpufrequtils package.
#
# Karel Volný <kavol@seznam.cz>, 2007, 2008.
msgid ""
msgstr ""
"Project-Id-Version: cs\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2011-03-08 17:03+0100\n"
"PO-Revision-Date: 2008-06-11 16:26+0200\n"
"Last-Translator: Karel Volný <kavol@seznam.cz>\n"
"Language-Team: Czech <diskuze@lists.l10n.cz>\n"
"Language: cs\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms:  nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
"X-Generator: KBabel 1.11.4\n"

#: utils/idle_monitor/nhm_idle.c:36
msgid "Processor Core C3"
msgstr ""

#: utils/idle_monitor/nhm_idle.c:43
msgid "Processor Core C6"
msgstr ""

#: utils/idle_monitor/nhm_idle.c:51
msgid "Processor Package C3"
msgstr ""

#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70
msgid "Processor Package C6"
msgstr ""

#: utils/idle_monitor/snb_idle.c:33
msgid "Processor Core C7"
msgstr ""

#: utils/idle_monitor/snb_idle.c:40
msgid "Processor Package C2"
msgstr ""

#: utils/idle_monitor/snb_idle.c:47
msgid "Processor Package C7"
msgstr ""

#: utils/idle_monitor/amd_fam14h_idle.c:56
msgid "Package in sleep state (PC1 or deeper)"
msgstr ""

#: utils/idle_monitor/amd_fam14h_idle.c:63
msgid "Processor Package C1"
msgstr ""

#: utils/idle_monitor/amd_fam14h_idle.c:77
msgid "North Bridge P1 boolean counter (returns 0 or 1)"
msgstr ""

#: utils/idle_monitor/mperf_monitor.c:35
msgid "Processor Core not idle"
msgstr ""

#: utils/idle_monitor/mperf_monitor.c:42
msgid "Processor Core in an idle state"
msgstr ""

#: utils/idle_monitor/mperf_monitor.c:50
msgid "Average Frequency (including boost) in MHz"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:66
#, c-format
msgid ""
"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
"interval_sec | -c command ...]\n"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:69
#, c-format
msgid ""
"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
"interval_sec | -c command ...]\n"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:71
#, c-format
msgid "\t -v: be more verbose\n"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:73
#, c-format
msgid "\t -h: print this help\n"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:74
#, c-format
msgid "\t -i: time intervall to measure for in seconds (default 1)\n"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:75
#, c-format
msgid "\t -t: show CPU topology/hierarchy\n"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:76
#, c-format
msgid "\t -l: list available CPU sleep monitors (for use with -m)\n"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:77
#, c-format
msgid "\t -m: show specific CPU sleep monitors only (in same order)\n"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:79
#, c-format
msgid ""
"only one of: -t, -l, -m are allowed\n"
"If none of them is passed,"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:80
#, c-format
msgid " all supported monitors are shown\n"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:197
#, c-format
msgid "Monitor %s, Counter %s has no count function. Implementation error\n"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:207
#, c-format
msgid " *is offline\n"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:236
#, c-format
msgid "%s: max monitor name length (%d) exceeded\n"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:250
#, c-format
msgid "No matching monitor found in %s, try -l option\n"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:266
#, c-format
msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:319
#, c-format
msgid "%s took %.5f seconds and exited with status %d\n"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:406
#, c-format
msgid "Cannot read number of available processors\n"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:417
#, c-format
msgid "Available monitor %s needs root access\n"
msgstr ""

#: utils/idle_monitor/cpupower-monitor.c:428
#, c-format
msgid "No HW Cstate monitors found\n"
msgstr ""

#: utils/cpupower.c:78
#, c-format
msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n"
msgstr ""

#: utils/cpupower.c:79
#, c-format
msgid "cpupower --version\n"
msgstr ""

#: utils/cpupower.c:80
#, c-format
msgid "Supported subcommands are:\n"
msgstr ""

#: utils/cpupower.c:83
#, c-format
msgid ""
"\n"
"Some subcommands can make use of the -c cpulist option.\n"
msgstr ""

#: utils/cpupower.c:84
#, c-format
msgid "Look at the general cpupower manpage how to use it\n"
msgstr ""

#: utils/cpupower.c:85
#, c-format
msgid "and read up the subcommand's manpage whether it is supported.\n"
msgstr ""

#: utils/cpupower.c:86
#, c-format
msgid ""
"\n"
"Use cpupower help subcommand for getting help for above subcommands.\n"
msgstr ""

#: utils/cpupower.c:91
#, c-format
msgid "Report errors and bugs to %s, please.\n"
msgstr ""
"Chyby v programu prosím hlaste na %s (anglicky).\n"
"Chyby v překladu prosím hlaste na kavol@seznam.cz (česky ;-)\n"

#: utils/cpupower.c:114
#, c-format
msgid "Error parsing cpu list\n"
msgstr ""

#: utils/cpupower.c:172
#, c-format
msgid "Subcommand %s needs root privileges\n"
msgstr ""

#: utils/cpufreq-info.c:31
#, c-format
msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n"
msgstr "Nelze zjistit počet CPU (%s: %s), předpokládá se 1.\n"

#: utils/cpufreq-info.c:63
#, c-format
msgid ""
"          minimum CPU frequency  -  maximum CPU frequency  -  governor\n"
msgstr ""
"         minimální frekvence CPU - maximální frekvence CPU -  regulátor\n"

#: utils/cpufreq-info.c:151
#, c-format
msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n"
msgstr ""

#. P state changes via MSR are identified via cpuid 80000007
#. on Intel and AMD, but we assume boost capable machines can do that
#. if (cpuid_eax(0x80000000) >= 0x80000007
#. && (cpuid_edx(0x80000007) & (1 << 7)))
#.
#: utils/cpufreq-info.c:161
#, c-format
msgid "  boost state support: \n"
msgstr ""

#: utils/cpufreq-info.c:163
#, c-format
msgid "    Supported: %s\n"
msgstr ""

#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
msgid "yes"
msgstr ""

#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
msgid "no"
msgstr ""

#: utils/cpufreq-info.c:164
#, fuzzy, c-format
msgid "    Active: %s\n"
msgstr "  ovladač: %s\n"

#: utils/cpufreq-info.c:177
#, c-format
msgid "    Boost States: %d\n"
msgstr ""

#: utils/cpufreq-info.c:178
#, c-format
msgid "    Total States: %d\n"
msgstr ""

#: utils/cpufreq-info.c:181
#, c-format
msgid "    Pstate-Pb%d: %luMHz (boost state)\n"
msgstr ""

#: utils/cpufreq-info.c:184
#, c-format
msgid "    Pstate-P%d:  %luMHz\n"
msgstr ""

#: utils/cpufreq-info.c:211
#, c-format
msgid "  no or unknown cpufreq driver is active on this CPU\n"
msgstr "  pro tento CPU není aktivní žádný známý ovladač cpufreq\n"

#: utils/cpufreq-info.c:213
#, c-format
msgid "  driver: %s\n"
msgstr "  ovladač: %s\n"

#: utils/cpufreq-info.c:219
#, fuzzy, c-format
msgid "  CPUs which run at the same hardware frequency: "
msgstr "  CPU, které musí měnit frekvenci zároveň: "

#: utils/cpufreq-info.c:230
#, fuzzy, c-format
msgid "  CPUs which need to have their frequency coordinated by software: "
msgstr "  CPU, které musí měnit frekvenci zároveň: "

#: utils/cpufreq-info.c:241
#, c-format
msgid "  maximum transition latency: "
msgstr ""

#: utils/cpufreq-info.c:247
#, c-format
msgid "  hardware limits: "
msgstr "  hardwarové meze: "

#: utils/cpufreq-info.c:256
#, c-format
msgid "  available frequency steps: "
msgstr "  dostupné frekvence: "

#: utils/cpufreq-info.c:269
#, c-format
msgid "  available cpufreq governors: "
msgstr "  dostupné regulátory: "

#: utils/cpufreq-info.c:280
#, c-format
msgid "  current policy: frequency should be within "
msgstr "  současná taktika: frekvence by měla být mezi "

#: utils/cpufreq-info.c:282
#, c-format
msgid " and "
msgstr " a "

#: utils/cpufreq-info.c:286
#, c-format
msgid ""
"The governor \"%s\" may decide which speed to use\n"
"                  within this range.\n"
msgstr ""
"  Regulátor \"%s\" může rozhodnout jakou frekvenci použít\n"
"                    v těchto mezích.\n"

#: utils/cpufreq-info.c:293
#, c-format
msgid "  current CPU frequency is "
msgstr "  současná frekvence CPU je "

#: utils/cpufreq-info.c:296
#, c-format
msgid " (asserted by call to hardware)"
msgstr "  (zjištěno hardwarovým voláním)"

#: utils/cpufreq-info.c:304
#, c-format
msgid "  cpufreq stats: "
msgstr "  statistika cpufreq: "

#: utils/cpufreq-info.c:472
#, fuzzy, c-format
msgid "Usage: cpupower freqinfo [options]\n"
msgstr "Užití: cpufreq-info [přepínače]\n"

#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23
#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148
#, c-format
msgid "Options:\n"
msgstr "Přepínače:\n"

#: utils/cpufreq-info.c:474
#, fuzzy, c-format
msgid "  -e, --debug          Prints out debug information [default]\n"
msgstr "  -e, --debug          Vypíše ladicí informace\n"

#: utils/cpufreq-info.c:475
#, c-format
msgid ""
"  -f, --freq           Get frequency the CPU currently runs at, according\n"
"                       to the cpufreq core *\n"
msgstr ""
"  -f, --freq           Zjistí aktuální frekvenci, na které CPU běží\n"
"                       podle cpufreq *\n"

#: utils/cpufreq-info.c:477
#, c-format
msgid ""
"  -w, --hwfreq         Get frequency the CPU currently runs at, by reading\n"
"                       it from hardware (only available to root) *\n"
msgstr ""
"  -w, --hwfreq         Zjistí aktuální frekvenci, na které CPU běží\n"
"                       z hardware (dostupné jen uživateli root) *\n"

#: utils/cpufreq-info.c:479
#, c-format
msgid ""
"  -l, --hwlimits       Determine the minimum and maximum CPU frequency "
"allowed *\n"
msgstr ""
"  -l, --hwlimits       Zjistí minimální a maximální dostupnou frekvenci CPU "
"*\n"

#: utils/cpufreq-info.c:480
#, c-format
msgid "  -d, --driver         Determines the used cpufreq kernel driver *\n"
msgstr "  -d, --driver         Zjistí aktivní ovladač cpufreq *\n"

#: utils/cpufreq-info.c:481
#, c-format
msgid "  -p, --policy         Gets the currently used cpufreq policy *\n"
msgstr "  -p, --policy         Zjistí aktuální taktiku cpufreq *\n"

#: utils/cpufreq-info.c:482
#, c-format
msgid "  -g, --governors      Determines available cpufreq governors *\n"
msgstr "  -g, --governors      Zjistí dostupné regulátory cpufreq *\n"

#: utils/cpufreq-info.c:483
#, fuzzy, c-format
msgid ""
"  -r, --related-cpus   Determines which CPUs run at the same hardware "
"frequency *\n"
msgstr ""
"  -a, --affected-cpus  Zjistí, které CPU musí měnit frekvenci zároveň *\n"

#: utils/cpufreq-info.c:484
#, fuzzy, c-format
msgid ""
"  -a, --affected-cpus  Determines which CPUs need to have their frequency\n"
"                       coordinated by software *\n"
msgstr ""
"  -a, --affected-cpus  Zjistí, které CPU musí měnit frekvenci zároveň *\n"

#: utils/cpufreq-info.c:486
#, c-format
msgid "  -s, --stats          Shows cpufreq statistics if available\n"
msgstr "  -s, --stats          Zobrazí statistiku cpufreq, je-li dostupná\n"

#: utils/cpufreq-info.c:487
#, fuzzy, c-format
msgid ""
"  -y, --latency        Determines the maximum latency on CPU frequency "
"changes *\n"
msgstr ""
"  -l, --hwlimits       Zjistí minimální a maximální dostupnou frekvenci CPU "
"*\n"

#: utils/cpufreq-info.c:488
#, c-format
msgid "  -b, --boost          Checks for turbo or boost modes  *\n"
msgstr ""

#: utils/cpufreq-info.c:489
#, c-format
msgid ""
"  -o, --proc           Prints out information like provided by the /proc/"
"cpufreq\n"
"                       interface in 2.4. and early 2.6. kernels\n"
msgstr ""
"  -o, --proc           Vypíše informace ve formátu, jaký používalo rozhraní\n"
"                       /proc/cpufreq v kernelech řady 2.4 a časné 2.6\n"

#: utils/cpufreq-info.c:491
#, fuzzy, c-format
msgid ""
"  -m, --human          human-readable output for the -f, -w, -s and -y "
"parameters\n"
msgstr ""
"  -m, --human          Výstup parametrů -f, -w a -s v „lidmi čitelném“ "
"formátu\n"

#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152
#, c-format
msgid "  -h, --help           Prints out this screen\n"
msgstr "  -h, --help           Vypíše tuto nápovědu\n"

#: utils/cpufreq-info.c:495
#, c-format
msgid ""
"If no argument or only the -c, --cpu parameter is given, debug output about\n"
"cpufreq is printed which is useful e.g. for reporting bugs.\n"
msgstr ""
"Není-li zadán žádný parametr nebo je-li zadán pouze přepínač -c, --cpu, "
"jsou\n"
"vypsány ladicí informace, což může být užitečné například při hlášení chyb.\n"

#: utils/cpufreq-info.c:497
#, c-format
msgid ""
"For the arguments marked with *, omitting the -c or --cpu argument is\n"
"equivalent to setting it to zero\n"
msgstr ""
"Není-li při použití přepínačů označených * zadán parametr -c nebo --cpu,\n"
"předpokládá se jeho hodnota 0.\n"

#: utils/cpufreq-info.c:580
#, c-format
msgid ""
"The argument passed to this tool can't be combined with passing a --cpu "
"argument\n"
msgstr "Zadaný parametr nemůže být použit zároveň s přepínačem -c nebo --cpu\n"

#: utils/cpufreq-info.c:596
#, c-format
msgid ""
"You can't specify more than one --cpu parameter and/or\n"
"more than one output-specific argument\n"
msgstr ""
"Nelze zadat více než jeden parametr -c nebo --cpu\n"
"anebo více než jeden parametr určující výstup\n"

#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42
#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213
#, c-format
msgid "invalid or unknown argument\n"
msgstr "neplatný nebo neznámý parametr\n"

#: utils/cpufreq-info.c:617
#, c-format
msgid "couldn't analyze CPU %d as it doesn't seem to be present\n"
msgstr "nelze analyzovat CPU %d, vypadá to, že není přítomen\n"

#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142
#, c-format
msgid "analyzing CPU %d:\n"
msgstr "analyzuji CPU %d:\n"

#: utils/cpufreq-set.c:25
#, fuzzy, c-format
msgid "Usage: cpupower frequency-set [options]\n"
msgstr "Užití: cpufreq-set [přepínače]\n"

#: utils/cpufreq-set.c:27
#, c-format
msgid ""
"  -d FREQ, --min FREQ      new minimum CPU frequency the governor may "
"select\n"
msgstr ""
"  -d FREQ, --min FREQ      Nová nejnižší frekvence, kterou může regulátor "
"vybrat\n"

#: utils/cpufreq-set.c:28
#, c-format
msgid ""
"  -u FREQ, --max FREQ      new maximum CPU frequency the governor may "
"select\n"
msgstr ""
"  -u FREQ, --max FREQ      Nová nejvyšší frekvence, kterou může regulátor "
"zvolit\n"

#: utils/cpufreq-set.c:29
#, c-format
msgid "  -g GOV, --governor GOV   new cpufreq governor\n"
msgstr "  -g GOV, --governors GOV  Nový regulátor cpufreq\n"

#: utils/cpufreq-set.c:30
#, c-format
msgid ""
"  -f FREQ, --freq FREQ     specific frequency to be set. Requires userspace\n"
"                           governor to be available and loaded\n"
msgstr ""
"  -f FREQ, --freq FREQ     Frekvence, která má být nastavena. Vyžaduje, aby "
"byl\n"
"                           v jádře nahrán regulátor ‚userspace‘.\n"

#: utils/cpufreq-set.c:32
#, c-format
msgid "  -r, --related            Switches all hardware-related CPUs\n"
msgstr ""

#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27
#, fuzzy, c-format
msgid "  -h, --help               Prints out this screen\n"
msgstr "  -h, --help           Vypíše tuto nápovědu\n"

#: utils/cpufreq-set.c:35
#, fuzzy, c-format
msgid ""
"Notes:\n"
"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n"
msgstr ""
"Není-li při použití přepínačů označených * zadán parametr -c nebo --cpu,\n"
"předpokládá se jeho hodnota 0.\n"

#: utils/cpufreq-set.c:37
#, fuzzy, c-format
msgid ""
"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other "
"parameter\n"
"   except the -c CPU, --cpu CPU parameter\n"
"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n"
"   by postfixing the value with the wanted unit name, without any space\n"
"   (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"
msgstr ""
"Poznámky:\n"
"1. Vynechání parametru -c nebo --cpu je ekvivalentní jeho nastavení na 0\n"
"2. Přepínač -f nebo --freq nemůže být použit zároveň s žádným jiným vyjma -"
"c\n"
"   nebo --cpu\n"
"3. Frekvence (FREQ) mohou být zadány v Hz, kHz (výchozí), MHz, GHz nebo THz\n"
"   připojením názvu jednotky bez mezery mezi číslem a jednotkou\n"
"   (FREQ v kHz =^ Hz * 0,001 = ^ MHz * 1000 =^ GHz * 1000000)\n"

#: utils/cpufreq-set.c:57
#, c-format
msgid ""
"Error setting new values. Common errors:\n"
"- Do you have proper administration rights? (super-user?)\n"
"- Is the governor you requested available and modprobed?\n"
"- Trying to set an invalid policy?\n"
"- Trying to set a specific frequency, but userspace governor is not "
"available,\n"
"   for example because of hardware which cannot be set to a specific "
"frequency\n"
"   or because the userspace governor isn't loaded?\n"
msgstr ""
"Chyba při nastavování nových hodnot. Obvyklé problémy:\n"
"- Máte patřičná administrátorská práva? (root?)\n"
"- Je požadovaný regulátor dostupný v jádře? (modprobe?)\n"
"- Snažíte se nastavit neplatnou taktiku?\n"
"- Snažíte se nastavit určitou frekvenci, ale není dostupný\n"
"  regulátor ‚userspace‘, například protože není nahrán v jádře,\n"
"  nebo nelze na tomto hardware nastavit určitou frekvenci?\n"

#: utils/cpufreq-set.c:170
#, c-format
msgid "wrong, unknown or unhandled CPU?\n"
msgstr "neznámý nebo nepodporovaný CPU?\n"

#: utils/cpufreq-set.c:302
#, c-format
msgid ""
"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n"
"-g/--governor parameters\n"
msgstr ""
"přepínač -f/--freq nemůže být použit zároveň\n"
"s přepínačem -d/--min, -u/--max nebo -g/--governor\n"

#: utils/cpufreq-set.c:308
#, c-format
msgid ""
"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n"
"-g/--governor must be passed\n"
msgstr ""
"Musí být zadán alespoň jeden přepínač\n"
"-f/--freq, -d/--min, -u/--max nebo -g/--governor\n"

#: utils/cpufreq-set.c:347
#, c-format
msgid "Setting cpu: %d\n"
msgstr ""

#: utils/cpupower-set.c:22
#, c-format
msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"
msgstr ""

#: utils/cpupower-set.c:24
#, c-format
msgid ""
"  -b, --perf-bias [VAL]    Sets CPU's power vs performance policy on some\n"
"                           Intel models [0-15], see manpage for details\n"
msgstr ""

#: utils/cpupower-set.c:26
#, c-format
msgid ""
"  -m, --sched-mc  [VAL]    Sets the kernel's multi core scheduler policy.\n"
msgstr ""

#: utils/cpupower-set.c:27
#, c-format
msgid ""
"  -s, --sched-smt [VAL]    Sets the kernel's thread sibling scheduler "
"policy.\n"
msgstr ""

#: utils/cpupower-set.c:80
#, c-format
msgid "--perf-bias param out of range [0-%d]\n"
msgstr ""

#: utils/cpupower-set.c:91
#, c-format
msgid "--sched-mc param out of range [0-%d]\n"
msgstr ""

#: utils/cpupower-set.c:102
#, c-format
msgid "--sched-smt param out of range [0-%d]\n"
msgstr ""

#: utils/cpupower-set.c:121
#, c-format
msgid "Error setting sched-mc %s\n"
msgstr ""

#: utils/cpupower-set.c:127
#, c-format
msgid "Error setting sched-smt %s\n"
msgstr ""

#: utils/cpupower-set.c:146
#, c-format
msgid "Error setting perf-bias value on CPU %d\n"
msgstr ""

#: utils/cpupower-info.c:21
#, c-format
msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n"
msgstr ""

#: utils/cpupower-info.c:23
#, c-format
msgid ""
"  -b, --perf-bias    Gets CPU's power vs performance policy on some\n"
"                           Intel models [0-15], see manpage for details\n"
msgstr ""

#: utils/cpupower-info.c:25
#, fuzzy, c-format
msgid "  -m, --sched-mc     Gets the kernel's multi core scheduler policy.\n"
msgstr "  -p, --policy         Zjistí aktuální taktiku cpufreq *\n"

#: utils/cpupower-info.c:26
#, c-format
msgid ""
"  -s, --sched-smt    Gets the kernel's thread sibling scheduler policy.\n"
msgstr ""

#: utils/cpupower-info.c:28
#, c-format
msgid ""
"\n"
"Passing no option will show all info, by default only on core 0\n"
msgstr ""

#: utils/cpupower-info.c:102
#, c-format
msgid "System's multi core scheduler setting: "
msgstr ""

#. if sysfs file is missing it's: errno == ENOENT
#: utils/cpupower-info.c:105 utils/cpupower-info.c:114
#, c-format
msgid "not supported\n"
msgstr ""

#: utils/cpupower-info.c:111
#, c-format
msgid "System's thread sibling scheduler setting: "
msgstr ""

#: utils/cpupower-info.c:126
#, c-format
msgid "Intel's performance bias setting needs root privileges\n"
msgstr ""

#: utils/cpupower-info.c:128
#, c-format
msgid "System does not support Intel's performance bias setting\n"
msgstr ""

#: utils/cpupower-info.c:147
#, c-format
msgid "Could not read perf-bias value\n"
msgstr ""

#: utils/cpupower-info.c:150
#, c-format
msgid "perf-bias: %d\n"
msgstr ""

#: utils/cpuidle-info.c:28
#, fuzzy, c-format
msgid "Analyzing CPU %d:\n"
msgstr "analyzuji CPU %d:\n"

#: utils/cpuidle-info.c:32
#, c-format
msgid "CPU %u: No idle states\n"
msgstr ""

#: utils/cpuidle-info.c:36
#, c-format
msgid "CPU %u: Can't read idle state info\n"
msgstr ""

#: utils/cpuidle-info.c:41
#, c-format
msgid "Could not determine max idle state %u\n"
msgstr ""

#: utils/cpuidle-info.c:46
#, c-format
msgid "Number of idle states: %d\n"
msgstr ""

#: utils/cpuidle-info.c:48
#, fuzzy, c-format
msgid "Available idle states:"
msgstr "  dostupné frekvence: "

#: utils/cpuidle-info.c:71
#, c-format
msgid "Flags/Description: %s\n"
msgstr ""

#: utils/cpuidle-info.c:74
#, c-format
msgid "Latency: %lu\n"
msgstr ""

#: utils/cpuidle-info.c:76
#, c-format
msgid "Usage: %lu\n"
msgstr ""

#: utils/cpuidle-info.c:78
#, c-format
msgid "Duration: %llu\n"
msgstr ""

#: utils/cpuidle-info.c:90
#, c-format
msgid "Could not determine cpuidle driver\n"
msgstr ""

#: utils/cpuidle-info.c:94
#, fuzzy, c-format
msgid "CPUidle driver: %s\n"
msgstr "  ovladač: %s\n"

#: utils/cpuidle-info.c:99
#, c-format
msgid "Could not determine cpuidle governor\n"
msgstr ""

#: utils/cpuidle-info.c:103
#, c-format
msgid "CPUidle governor: %s\n"
msgstr ""

#: utils/cpuidle-info.c:122
#, c-format
msgid "CPU %u: Can't read C-state info\n"
msgstr ""

#. printf("Cstates: %d\n", cstates);
#: utils/cpuidle-info.c:127
#, c-format
msgid "active state:            C0\n"
msgstr ""

#: utils/cpuidle-info.c:128
#, c-format
msgid "max_cstate:              C%u\n"
msgstr ""

#: utils/cpuidle-info.c:129
#, c-format
msgid "maximum allowed latency: %lu usec\n"
msgstr ""

#: utils/cpuidle-info.c:130
#, c-format
msgid "states:\t\n"
msgstr ""

#: utils/cpuidle-info.c:132
#, c-format
msgid "    C%d:                  type[C%d] "
msgstr ""

#: utils/cpuidle-info.c:134
#, c-format
msgid "promotion[--] demotion[--] "
msgstr ""

#: utils/cpuidle-info.c:135
#, c-format
msgid "latency[%03lu] "
msgstr ""

#: utils/cpuidle-info.c:137
#, c-format
msgid "usage[%08lu] "
msgstr ""

#: utils/cpuidle-info.c:139
#, c-format
msgid "duration[%020Lu] \n"
msgstr ""

#: utils/cpuidle-info.c:147
#, fuzzy, c-format
msgid "Usage: cpupower idleinfo [options]\n"
msgstr "Užití: cpufreq-info [přepínače]\n"

#: utils/cpuidle-info.c:149
#, fuzzy, c-format
msgid "  -s, --silent         Only show general C-state information\n"
msgstr "  -e, --debug          Vypíše ladicí informace\n"

#: utils/cpuidle-info.c:150
#, fuzzy, c-format
msgid ""
"  -o, --proc           Prints out information like provided by the /proc/"
"acpi/processor/*/power\n"
"                       interface in older kernels\n"
msgstr ""
"  -o, --proc           Vypíše informace ve formátu, jaký používalo rozhraní\n"
"                       /proc/cpufreq v kernelech řady 2.4 a časné 2.6\n"

#: utils/cpuidle-info.c:209
#, fuzzy, c-format
msgid "You can't specify more than one output-specific argument\n"
msgstr ""
"Nelze zadat více než jeden parametr -c nebo --cpu\n"
"anebo více než jeden parametr určující výstup\n"

#~ msgid ""
#~ "  -c CPU, --cpu CPU    CPU number which information shall be determined "
#~ "about\n"
#~ msgstr ""
#~ "  -c CPU, --cpu CPU    Číslo CPU, o kterém se mají zjistit informace\n"

#~ msgid ""
#~ "  -c CPU, --cpu CPU        number of CPU where cpufreq settings shall be "
#~ "modified\n"
#~ msgstr ""
#~ "  -c CPU, --cpu CPU        Číslo CPU pro který se má provést nastavení "
#~ "cpufreq\n"
